Merge remote-tracking branch 'upstream/master' into vagrant+packer

.github/workflows/branches.yml

@@ -19,7 +19,7 @@ jobs:
     # Steps represent a sequence of tasks that will be executed as part of the job
     steps:
       # Checks-out the repository under $GITHUB_WORKSPACE, so the job can access it
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           fetch-depth: 0 # fetch all history for all branches and tags
 

.github/workflows/build.yml

@@ -11,7 +11,7 @@ on:
     tags:
       - "v*"
   pull_request:
-    branches: [ "master", "development" ]
+    branches: [ "master" ]
 
 #---------------------------------#
 #    environment configuration    #
@@ -35,12 +35,12 @@ jobs:
       discussions: write
     steps:
     - name: Check out repository code (Action from GitHub)
-      uses: actions/checkout@v5
+      uses: actions/checkout@v4
       with:
         fetch-depth: 0
 
     - name: Add MSBuild to PATH
-      uses: microsoft/setup-msbuild@v2
+      uses: microsoft/setup-msbuild@v1
 
     - name: Build Cmder Launcher
       shell: pwsh
@@ -53,32 +53,32 @@ jobs:
       run: .\pack.ps1 -verbose
 
     - name: Upload artifact (cmder.zip)
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v3
       with:
         path: build/cmder.zip
         name: cmder.zip
         if-no-files-found: error
 
     - name: Upload artifact (cmder.7z)
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v3
       with:
         path: build/cmder.7z
         name: cmder.7z
 
     - name: Upload artifact (cmder_mini.zip)
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v3
       with:
         path: build/cmder_mini.zip
         name: cmder_mini.zip
 
     - name: Upload artifact (hashes.txt)
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v3
       with:
         path: build/hashes.txt
         name: hashes.txt
 
     - name: Create Release
-      uses: softprops/action-gh-release@v2
+      uses: softprops/action-gh-release@v1
       with:
         files: |
           build/cmder.zip

.github/workflows/codeql.yml

@@ -8,7 +8,7 @@ name: "CodeQL"
 
 on:
   push:
-    branches: [ "master", "development" ]
+    branches: [ "master" ]
     paths-ignore:
       - '**/*.md'
       - '**/*.txt'
@@ -16,7 +16,7 @@ on:
       - '**/.gitignore'
   pull_request:
     # The branches below must be a subset of the branches above
-    branches: [ "master", "development" ]
+    branches: [ "master" ]
     paths-ignore:
       - '**/*.md'
       - '**/*.txt'
@@ -45,11 +45,11 @@ jobs:
 
     steps:
     - name: Checkout repository
-      uses: actions/checkout@v5
+      uses: actions/checkout@v4
 
     # Initializes the CodeQL tools for scanning.
     - name: Initialize CodeQL
-      uses: github/codeql-action/init@v3
+      uses: github/codeql-action/init@v2
       with:
         languages: ${{ matrix.language }}
         # If you wish to specify custom queries, you can do so here or in a config file.
@@ -60,7 +60,7 @@ jobs:
         # queries: security-extended,security-and-quality
 
     - name: Add MSBuild to PATH
-      uses: microsoft/setup-msbuild@v2
+      uses: microsoft/setup-msbuild@v1
 
     - name: Build Cmder Launcher
       shell: pwsh
@@ -68,6 +68,6 @@ jobs:
       run: .\build.ps1 -Compile -verbose
 
     - name: Perform CodeQL Analysis
-      uses: github/codeql-action/analyze@v3
+      uses: github/codeql-action/analyze@v2
       with:
         category: "/language:${{matrix.language}}"

.github/workflows/tests.yml

@@ -4,7 +4,6 @@ on:
   push:
     branches:
       - master
-      - development
     paths-ignore:
       - '**/*.md'
       - '**/*.txt'
@@ -13,7 +12,6 @@ on:
   pull_request:
     branches:
       - master
-      - development
     paths-ignore:
       - '**/*.md'
       - '**/*.txt'
@@ -38,7 +36,7 @@ jobs:
     continue-on-error: false
 
     steps:
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v4
     - name: Initialize vendors
       shell: pwsh
       working-directory: scripts

.github/workflows/vendor.yml

@@ -24,7 +24,7 @@ jobs:
       pull-requests: write
 
     steps:
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v4
       with:
         fetch-depth: 0
 
@@ -51,7 +51,7 @@ jobs:
           Set-GHVariable -Name LIST_UPDATED -Value $listUpdated.Trim(', ')
           echo "UPDATE_MESSAGE<<<EOF`n$updateMessage`n<EOF" | Out-File -FilePath $env:GITHUB_ENV -Append -Encoding utf8
 
-    - uses: peter-evans/create-pull-request@v7
+    - uses: peter-evans/create-pull-request@v5
       if: env.COUNT_UPDATED > 0
       with:
         title: 'Updates to `${{ env.COUNT_UPDATED }}` vendored dependencies'

.gitignore

@@ -31,3 +31,10 @@ launcher/src/version.rc2
 .vs/*
 .vscode
 .idea
+.vagrant/
+scripts/packer/iso/*.iso
+!scripts/packer/floppy/*.exe
+scripts/packer/packer_cache
+scripts/packer/output-*
+*.box
+

Vagrantfile

@@ -0,0 +1,66 @@
+required_plugins = %w( vagrant-vbguest )
+required_plugins.each do |plugin|
+  unless Vagrant.has_plugin? plugin
+    system "vagrant plugin install #{plugin}"
+    p "Run 'vagrant up' again to continue."
+    exit 0
+  end
+end
+
+Vagrant.configure("2") do |config|
+  # config.vbguest.iso_path = "../../../../usr/share/virtualbox/VBoxGuestAdditions.iso"
+  config.vbguest.allow_downgrade = true
+
+  config.vm.define "cmderdev-10" do |b|
+    b.vm.hostname = "cmderdev-10"
+    b.vm.box = "dgames/cmderdev-10"
+    b.vm.box_version = "1.0.0"
+
+    b.vm.provider :virtualbox do |v|
+      # v.customize ["modifyvm", :id, "--natdnshostresolver1", "on"]
+      v.customize ["modifyvm", :id, "--name", "cmderdev-10"]
+      v.customize ["modifyvm", :id, "--ostype", "Windows10_64"]
+      v.customize ["modifyvm", :id, "--graphicscontroller", "vboxsvga"]
+      v.customize ["modifyvm", :id, "--memory", 2048]
+      v.customize ["modifyvm", :id, "--clipboard", "bidirectional"]
+    end
+  end
+
+  config.vm.define "cmderdev-10s" do |b|
+    b.vm.hostname = 'cmderdev-10'
+    b.vm.box = "dgames/cmderdev-10"
+    b.vm.box_version = "1.0.0"
+
+    b.vm.provider :virtualbox do |v|
+      # v.customize ["modifyvm", :id, "--natdnshostresolver1", "on"]
+      v.customize ["modifyvm", :id, "--name", "cmderdev-10s"]
+      v.customize ["modifyvm", :id, "--ostype", "Windows10_64"]
+      v.customize ["modifyvm", :id, "--graphicscontroller", "vboxsvga"]
+      v.customize ["modifyvm", :id, "--memory", 2048]
+      v.customize ["modifyvm", :id, "--clipboard", "bidirectional"]
+      v.customize ["setextradata", :id, "GUI/ScaleFactor", "1.75"]
+    end
+  end
+
+  config.vm.define "cmderdev-11" do |b|
+    b.vm.box = "dgames/cmderdev-11"
+    b.vm.box_version = "1.0.0"
+
+    b.vm.provider :virtualbox do |v|
+      # v.customize ["modifyvm", :id, "--natdnshostresolver1", "on"]
+      v.customize ["modifyvm", :id, "--name", "cmderdev-11"]
+      v.customize ["modifyvm", :id, "--ostype", "Windows11_64"]
+      v.customize ["modifyvm", :id, "--graphicscontroller", "vboxvga"]
+      v.customize ["modifyvm", :id, "--memory", 4096]
+      v.customize ["modifyvm", :id, "--clipboard", "bidirectional"]
+    end
+  end
+
+  config.vm.provision "file", source: "./scripts/vagrant/windows_terminal_settings.json.default", destination: "windows_terminal_settings.json.default"
+  config.vm.provision "file", source: "./scripts/vagrant/windows_terminal_state.json.default", destination: "windows_terminal_state.json.default"
+  config.vm.provision "file", source: "./vendor/bin/set-shortcut.ps1", destination: "c:\\windows\\set-shortcut.ps1"
+  config.vm.provision "shell", path: './scripts/vagrant/add-cmder.ps1'
+  config.vm.provision "shell", path: './vendor/bin/add-vscodeprofile.ps1'
+  config.vm.provision "shell", path: './vendor/bin/add-windowsterminalprofiles.ps1'
+  config.vm.provision "shell", path: './vendor/bin/add-cmdertodesktop.ps1'
+end

launcher/src/CmderLauncher.cpp

@@ -469,6 +469,9 @@ void StartCmder(std::wstring  path = L"", bool is_single_mode = false, std::wstr
 		MessageBox(NULL, _T("Unable to create the ConEmu process!"), _T("Error"), MB_OK);
 		return;
 	}
+
+	LRESULT lr = SendMessageTimeout(HWND_BROADCAST, WM_SETTINGCHANGE, 0, (LPARAM)"Environment", SMTO_ABORTIFHUNG | SMTO_NOTIMEOUTIFNOTHUNG, 5000, NULL);
+	lr = SendMessageTimeout(HWND_BROADCAST, WM_SETTINGCHANGE, 0, (LPARAM)L"Environment", SMTO_ABORTIFHUNG | SMTO_NOTIMEOUTIFNOTHUNG, 5000, NULL); // For Windows >= 8
 }
 
 bool IsUserOnly(std::wstring opt)

launcher/src/version.rc2.sample

@@ -1,8 +1,9 @@
 
 /**
- * WARNING: This file should NOT be manually modified!
+ * WARNING: do NOT modify this file! the content of this file should be
- *          The contents will be automatically generated using the `.ps1` PowerShell scripts,
+ *          automatically genereted before AppVeyor builds using the
- *          during builds by the CI.
+ *          respective .ps1 Powershell scripts.
+ *
  */
 
 /////////////////////////////////////////////////////////////////////////////

packignore

@@ -25,3 +25,5 @@ vendor\git-prompt.sh
 config\user-*
 clink_history*
 *.log
+Vagrantfile
+*.box

scripts/build.ps1

@@ -21,7 +21,7 @@
 
     Skip all downloads and only build launcher.
 .EXAMPLE
-    .\build.ps1 -verbose
+    .\build -verbose
 
     Execute the build and see what's going on.
 .EXAMPLE
@@ -33,7 +33,7 @@
     Samuel Vasko, Jack Bennett
     Part of the Cmder project.
 .LINK
-    https://github.com/cmderdev/cmder - Project Home
+    http://cmder.app/ - Project Home
 #>
 [CmdletBinding(SupportsShouldProcess = $true)]
 Param(
@@ -79,7 +79,7 @@ if ($Compile) {
 
     Write-Verbose "Building the launcher..."
 
-    # Reference: https://docs.microsoft.com/visualstudio/msbuild/msbuild-command-line-reference
+    # Referene: https://docs.microsoft.com/visualstudio/msbuild/msbuild-command-line-reference
     msbuild CmderLauncher.vcxproj /t:Clean,Build /p:configuration=Release /m
 
     if ($LastExitCode -ne 0) {

scripts/pack.ps1

@@ -35,7 +35,7 @@ Param(
     [string]$saveTo = "$PSScriptRoot\..\build"
 )
 
-$cmder_root = Resolve-Path $cmderRoot
+$cmderRoot = Resolve-Path $cmderRoot
 
 . "$PSScriptRoot\utils.ps1"
 $ErrorActionPreference = "Stop"
@@ -47,10 +47,10 @@ $targets = @{
     "cmder_mini.zip" = "-xr!`"vendor\git-for-windows`"";
 }
 
-Push-Location -Path $cmder_root
+Push-Location -Path $cmderRoot
 
-Delete-Existing "$cmder_root\Version*"
+Delete-Existing "$cmderRoot\Version*"
-Delete-Existing "$cmder_root\build\*"
+Delete-Existing "$cmderRoot\build\*"
 
 if (-not (Test-Path -PathType container $saveTo)) {
     (New-Item -ItemType Directory -Path $saveTo) | Out-Null
@@ -59,16 +59,16 @@ if (-not (Test-Path -PathType container $saveTo)) {
 $saveTo = Resolve-Path $saveTo
 
 $version = Get-VersionStr
-(New-Item -ItemType file "$cmder_root\Version $version") | Out-Null
+(New-Item -ItemType file "$cmderRoot\Version $version") | Out-Null
 
 if ($PSCmdlet.MyInvocation.BoundParameters["Verbose"].IsPresent) {
     Write-Verbose "Packing Cmder $version in $saveTo..."
-    $excluded = (Get-Content -Path "$cmder_root\packignore") -Split [System.Environment]::NewLine | Where-Object { $_ }
+    $excluded = (Get-Content -Path "$cmderRoot\packignore") -Split [System.Environment]::NewLine | Where-Object { $_ }
-    Get-ChildItem $cmder_root -Force -Exclude $excluded
+    Get-ChildItem $cmderRoot -Force -Exclude $excluded
 }
 
 foreach ($t in $targets.GetEnumerator()) {
-    Create-Archive "$cmder_root" "$saveTo\$($t.Name)" $t.Value
+    Create-Archive "$cmderRoot" "$saveTo\$($t.Name)" $t.Value
     $hash = (Digest-Hash "$saveTo\$($t.Name)")
     Add-Content -path "$saveTo\hashes.txt" -value ($t.Name + ' ' + $hash)
 }

scripts/packer/README.md

@@ -0,0 +1,8 @@
+# Packer Support - Release Notes
+
+Most of the Packer support for Cmder is shamelessly being borrowed from the following repositories.
+
+- [StefanScherer/packer-windows](https://github.com/StefanScherer/packer-windows)
+- [Baune8D/packer-windows-desktop](https://github.com/Baune8D/packer-windows-desktop)
+
+Thank you both for the good work!

scripts/packer/answer_files/10_efi/Autounattend.xml

@@ -0,0 +1,228 @@
+<?xml version="1.0" encoding="utf-8"?>
+<unattend xmlns="urn:schemas-microsoft-com:unattend">
+    <servicing/>
+    <settings pass="windowsPE">
+        <component xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+            <DiskConfiguration>
+                <Disk wcm:action="add">
+                    <CreatePartitions>
+                        <CreatePartition wcm:action="add">
+                            <Order>1</Order>
+                            <Size>500</Size>
+                            <Type>EFI</Type>
+                        </CreatePartition>
+                        <CreatePartition wcm:action="add">
+                            <Order>2</Order>
+                            <Size>128</Size>
+                            <Type>MSR</Type>
+                        </CreatePartition>
+                        <CreatePartition wcm:action="add">
+                            <Order>3</Order>
+                            <Extend>true</Extend>
+                            <Type>Primary</Type>
+                        </CreatePartition>
+                    </CreatePartitions>
+                    <DiskID>0</DiskID>
+                    <WillWipeDisk>true</WillWipeDisk>
+                </Disk>
+            </DiskConfiguration>
+            <UserData>
+                <AcceptEula>true</AcceptEula>
+                <FullName>Vagrant</FullName>
+                <Organization>Vagrant</Organization>
+                <ProductKey>
+                    <Key>W269N-WFGWX-YVC9B-4J6C9-T83GX</Key>
+                    <WillShowUI>Never</WillShowUI>
+                </ProductKey>
+            </UserData>
+            <ImageInstall>
+                <OSImage>
+                    <InstallTo>
+                        <DiskID>0</DiskID>
+                        <PartitionID>3</PartitionID>
+                    </InstallTo>
+                    <WillShowUI>OnError</WillShowUI>
+                    <InstallToAvailablePartition>false</InstallToAvailablePartition>
+                </OSImage>
+            </ImageInstall>
+        </component>
+        <component xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+            <SetupUILanguage>
+                <UILanguage>en-US</UILanguage>
+            </SetupUILanguage>
+            <InputLocale>en-US</InputLocale>
+            <SystemLocale>en-US</SystemLocale>
+            <UILanguage>en-US</UILanguage>
+            <UILanguageFallback>en-US</UILanguageFallback>
+            <UserLocale>en-US</UserLocale>
+        </component>
+    </settings>
+    <settings pass="offlineServicing">
+        <component name="Microsoft-Windows-LUA-Settings" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+            <EnableLUA>false</EnableLUA>
+        </component>
+    </settings>
+    <settings pass="oobeSystem">
+        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+            <InputLocale>en-US</InputLocale>
+            <SystemLocale>en-US</SystemLocale>
+            <UILanguage>en-US</UILanguage>
+            <UserLocale>en-US</UserLocale>
+        </component>
+        <component xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+            <UserAccounts>
+                <AdministratorPassword>
+                    <Value>vagrant</Value>
+                    <PlainText>true</PlainText>
+                </AdministratorPassword>
+                <LocalAccounts>
+                    <LocalAccount wcm:action="add">
+                        <Password>
+                            <Value>vagrant</Value>
+                            <PlainText>true</PlainText>
+                        </Password>
+                        <Description>Vagrant User</Description>
+                        <DisplayName>vagrant</DisplayName>
+                        <Group>administrators</Group>
+                        <Name>vagrant</Name>
+                    </LocalAccount>
+                </LocalAccounts>
+            </UserAccounts>
+            <OOBE>
+                <HideEULAPage>true</HideEULAPage>
+                <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
+                <NetworkLocation>Home</NetworkLocation>
+                <ProtectYourPC>1</ProtectYourPC>
+            </OOBE>
+            <AutoLogon>
+                <Password>
+                    <Value>vagrant</Value>
+                    <PlainText>true</PlainText>
+                </Password>
+                <Username>vagrant</Username>
+                <Enabled>true</Enabled>
+            </AutoLogon>
+            <FirstLogonCommands>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c powershell -Command "Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Force"</CommandLine>
+                    <Description>Set Execution Policy 64 Bit</Description>
+                    <Order>1</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>C:\Windows\SysWOW64\cmd.exe /c powershell -Command "Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Force"</CommandLine>
+                    <Description>Set Execution Policy 32 Bit</Description>
+                    <Order>2</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c reg add "HKLM\System\CurrentControlSet\Control\Network\NewNetworkWindowOff"</CommandLine>
+                    <Description>Network prompt</Description>
+                    <Order>3</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File e:\fixnetwork.ps1</CommandLine>
+                    <Description>Fix public network</Description>
+                    <Order>4</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File e:\disable-winrm.ps1</CommandLine>
+                    <Description>Disable WinRM</Description>
+                    <Order>5</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\ /v HideFileExt /t REG_DWORD /d 0 /f</CommandLine>
+                    <Order>6</Order>
+                    <Description>Show file extensions in Explorer</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKCU\Console /v QuickEdit /t REG_DWORD /d 1 /f</CommandLine>
+                    <Order>7</Order>
+                    <Description>Enable QuickEdit mode</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\ /v Start_ShowRun /t REG_DWORD /d 1 /f</CommandLine>
+                    <Order>8</Order>
+                    <Description>Show Run command in Start Menu</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\ /v StartMenuAdminTools /t REG_DWORD /d 1 /f</CommandLine>
+                    <Order>9</Order>
+                    <Description>Show Administrative Tools in Start Menu</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKLM\SYSTEM\CurrentControlSet\Control\Power\ /v HibernateFileSizePercent /t REG_DWORD /d 0 /f</CommandLine>
+                    <Order>10</Order>
+                    <Description>Zero Hibernation File</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKLM\SYSTEM\CurrentControlSet\Control\Power\ /v HibernateEnabled /t REG_DWORD /d 0 /f</CommandLine>
+                    <Order>11</Order>
+                    <Description>Disable Hibernation Mode</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c wmic useraccount where "name='vagrant'" set PasswordExpires=FALSE</CommandLine>
+                    <Order>12</Order>
+                    <Description>Disable password expiration for vagrant user</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v DefaultPassword /t REG_SZ /d "vagrant" /f</CommandLine>
+                    <Order>13</Order>
+                    <Description>Enable AutoLogon</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v AutoAdminLogon /t REG_SZ /d 1 /f</CommandLine>
+                    <Order>14</Order>
+                    <Description>Enable AutoLogon</Description>
+                </SynchronousCommand>
+                <!-- WITHOUT WINDOWS UPDATES -->
+                <!--
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File e:\enable-winrm.ps1</CommandLine>
+                    <Description>Enable WinRM</Description>
+                    <Order>99</Order>
+                </SynchronousCommand>
+                -->
+                <!-- END WITHOUT WINDOWS UPDATES -->
+                <!-- WITH WINDOWS UPDATES -->
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c e:\microsoft-updates.bat</CommandLine>
+                    <Order>98</Order>
+                    <Description>Enable Microsoft Updates</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File e:\disable-screensaver.ps1</CommandLine>
+                    <Description>Disable Screensaver</Description>
+                    <Order>99</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File e:\win-updates.ps1</CommandLine>
+                    <Description>Install Windows Updates</Description>
+                    <Order>100</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <!-- END WITH WINDOWS UPDATES -->
+            </FirstLogonCommands>
+            <ShowWindowsLive>false</ShowWindowsLive>
+        </component>
+    </settings>
+    <settings pass="specialize">
+        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+            <OEMInformation>
+                <HelpCustomized>false</HelpCustomized>
+            </OEMInformation>
+            <!-- Rename computer here. -->
+            <ComputerName>vagrant-win10</ComputerName>
+            <TimeZone>Pacific Standard Time</TimeZone>
+            <RegisteredOwner/>
+        </component>
+        <component xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+            <SkipAutoActivation>true</SkipAutoActivation>
+        </component>
+    </settings>
+    <cpi:offlineImage xmlns:cpi="urn:schemas-microsoft-com:cpi" cpi:source="catalog:d:/sources/install_windows 7 ENTERPRISE.clg"/>
+</unattend>

scripts/packer/answer_files/11/Autounattend.xml

@@ -0,0 +1,298 @@
+<?xml version="1.0" encoding="utf-8"?>
+<unattend xmlns="urn:schemas-microsoft-com:unattend">
+    <servicing/>
+    <settings pass="windowsPE">
+        <component name="Microsoft-Windows-PnpCustomizationsWinPE"
+            publicKeyToken="31bf3856ad364e35" language="neutral"
+            versionScope="nonSxS" processorArchitecture="amd64"
+            xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
+
+            <!--
+                 This makes the VirtIO drivers available to Windows, assuming that
+                 the VirtIO driver disk at https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/stable-virtio/virtio-win.iso
+                 (see https://docs.fedoraproject.org/en-US/quick-docs/creating-windows-virtual-machines-using-virtio-drivers/index.html#virtio-win-direct-downloads)
+                 is available as drive E:
+            -->
+            <DriverPaths>
+                <PathAndCredentials wcm:action="add" wcm:keyValue="2">
+                    <Path>E:\viostor\w10\amd64</Path>
+                </PathAndCredentials>
+
+                <PathAndCredentials wcm:action="add" wcm:keyValue="3">
+                    <Path>E:\NetKVM\w10\amd64</Path>
+                </PathAndCredentials>
+
+                <PathAndCredentials wcm:action="add" wcm:keyValue="4">
+                    <Path>E:\Balloon\w10\amd64</Path>
+                </PathAndCredentials>
+
+                <PathAndCredentials wcm:action="add" wcm:keyValue="5">
+                    <Path>E:\pvpanic\w10\amd64</Path>
+                </PathAndCredentials>
+
+                <PathAndCredentials wcm:action="add" wcm:keyValue="6">
+                    <Path>E:\qemupciserial\w10\amd64</Path>
+                </PathAndCredentials>
+
+                <PathAndCredentials wcm:action="add" wcm:keyValue="7">
+                    <Path>E:\qxldod\w10\amd64</Path>
+                </PathAndCredentials>
+
+                <PathAndCredentials wcm:action="add" wcm:keyValue="8">
+                    <Path>E:\vioinput\w10\amd64</Path>
+                </PathAndCredentials>
+
+                <PathAndCredentials wcm:action="add" wcm:keyValue="9">
+                    <Path>E:\viorng\w10\amd64</Path>
+                </PathAndCredentials>
+
+                <PathAndCredentials wcm:action="add" wcm:keyValue="10">
+                    <Path>E:\vioscsi\w10\amd64</Path>
+                </PathAndCredentials>
+
+                <PathAndCredentials wcm:action="add" wcm:keyValue="11">
+                    <Path>E:\vioserial\w10\amd64</Path>
+                </PathAndCredentials>
+            </DriverPaths>
+        </component>
+        
+        <component xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+            <DiskConfiguration>
+                <Disk wcm:action="add">
+                    <CreatePartitions>
+                        <CreatePartition wcm:action="add">
+                            <Order>1</Order>
+                            <Type>Primary</Type>
+                            <Extend>true</Extend>
+                        </CreatePartition>
+                    </CreatePartitions>
+                    <ModifyPartitions>
+                        <ModifyPartition wcm:action="add">
+                            <Extend>false</Extend>
+                            <Format>NTFS</Format>
+                            <Letter>C</Letter>
+                            <Order>1</Order>
+                            <PartitionID>1</PartitionID>
+                            <Label>Windows 11</Label>
+                        </ModifyPartition>
+                    </ModifyPartitions>
+                    <DiskID>0</DiskID>
+                    <WillWipeDisk>true</WillWipeDisk>
+                </Disk>
+                <WillShowUI>OnError</WillShowUI>
+            </DiskConfiguration>
+            <UserData>
+                <AcceptEula>true</AcceptEula>
+                <FullName>Vagrant</FullName>
+                <Organization>Vagrant</Organization>
+
+                <!--
+                    NOTE: If you are re-configuring this for use of a retail key
+                    and using a retail ISO, you need to adjust the <ProductKey> block
+                    below to look like this:
+
+                    <ProductKey>
+                        <Key>W269N-WFGWX-YVC9B-4J6C9-T83GX</Key>
+                        <WillShowUI>Never</WillShowUI>
+                    </ProductKey>
+
+                    Notice the addition of the `<Key>` element.
+                -->
+            </UserData>
+            <ImageInstall>
+                <OSImage>
+                    <InstallTo>
+                        <DiskID>0</DiskID>
+                        <PartitionID>1</PartitionID>
+                    </InstallTo>
+                    <WillShowUI>OnError</WillShowUI>
+                    <InstallToAvailablePartition>false</InstallToAvailablePartition>
+                    <InstallFrom>
+                        <MetaData wcm:action="add">
+                            <Key>/IMAGE/NAME</Key>
+                            <Value>Windows 11 Enterprise Evaluation</Value>
+                        </MetaData>
+                    </InstallFrom>
+                </OSImage>
+            </ImageInstall>
+        </component>
+        <component xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+            <SetupUILanguage>
+                <UILanguage>en-US</UILanguage>
+            </SetupUILanguage>
+            <InputLocale>en-US</InputLocale>
+            <SystemLocale>en-US</SystemLocale>
+            <UILanguage>en-US</UILanguage>
+            <UILanguageFallback>en-US</UILanguageFallback>
+            <UserLocale>en-US</UserLocale>
+        </component>
+    </settings>
+    <settings pass="offlineServicing">
+        <component name="Microsoft-Windows-LUA-Settings" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+            <EnableLUA>false</EnableLUA>
+        </component>
+    </settings>
+    <settings pass="oobeSystem">
+        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+            <InputLocale>en-US</InputLocale>
+            <SystemLocale>en-US</SystemLocale>
+            <UILanguage>en-US</UILanguage>
+            <UserLocale>en-US</UserLocale>
+        </component>
+        <component xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+            <UserAccounts>
+                <AdministratorPassword>
+                    <Value>vagrant</Value>
+                    <PlainText>true</PlainText>
+                </AdministratorPassword>
+                <LocalAccounts>
+                    <LocalAccount wcm:action="add">
+                        <Password>
+                            <Value>vagrant</Value>
+                            <PlainText>true</PlainText>
+                        </Password>
+                        <Description>Vagrant User</Description>
+                        <DisplayName>vagrant</DisplayName>
+                        <Group>administrators</Group>
+                        <Name>vagrant</Name>
+                    </LocalAccount>
+                </LocalAccounts>
+            </UserAccounts>
+            <OOBE>
+                <HideEULAPage>true</HideEULAPage>
+                <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
+                <NetworkLocation>Home</NetworkLocation>
+                <ProtectYourPC>1</ProtectYourPC>
+            </OOBE>
+            <AutoLogon>
+                <Password>
+                    <Value>vagrant</Value>
+                    <PlainText>true</PlainText>
+                </Password>
+                <Username>vagrant</Username>
+                <Enabled>true</Enabled>
+            </AutoLogon>
+            <FirstLogonCommands>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c powershell -Command "Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Force"</CommandLine>
+                    <Description>Set Execution Policy 64 Bit</Description>
+                    <Order>1</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>C:\Windows\SysWOW64\cmd.exe /c powershell -Command "Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Force"</CommandLine>
+                    <Description>Set Execution Policy 32 Bit</Description>
+                    <Order>2</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c reg add "HKLM\System\CurrentControlSet\Control\Network\NewNetworkWindowOff"</CommandLine>
+                    <Description>Network prompt</Description>
+                    <Order>3</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File a:\fixnetwork.ps1</CommandLine>
+                    <Description>Fix public network</Description>
+                    <Order>4</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File a:\disable-winrm.ps1</CommandLine>
+                    <Description>Disable WinRM</Description>
+                    <Order>5</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\ /v HideFileExt /t REG_DWORD /d 0 /f</CommandLine>
+                    <Order>6</Order>
+                    <Description>Show file extensions in Explorer</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKCU\Console /v QuickEdit /t REG_DWORD /d 1 /f</CommandLine>
+                    <Order>7</Order>
+                    <Description>Enable QuickEdit mode</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\ /v Start_ShowRun /t REG_DWORD /d 1 /f</CommandLine>
+                    <Order>8</Order>
+                    <Description>Show Run command in Start Menu</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\ /v StartMenuAdminTools /t REG_DWORD /d 1 /f</CommandLine>
+                    <Order>9</Order>
+                    <Description>Show Administrative Tools in Start Menu</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKLM\SYSTEM\CurrentControlSet\Control\Power\ /v HibernateFileSizePercent /t REG_DWORD /d 0 /f</CommandLine>
+                    <Order>10</Order>
+                    <Description>Zero Hibernation File</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKLM\SYSTEM\CurrentControlSet\Control\Power\ /v HibernateEnabled /t REG_DWORD /d 0 /f</CommandLine>
+                    <Order>11</Order>
+                    <Description>Disable Hibernation Mode</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c wmic useraccount where "name='vagrant'" set PasswordExpires=FALSE</CommandLine>
+                    <Order>12</Order>
+                    <Description>Disable password expiration for vagrant user</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v DefaultPassword /t REG_SZ /d "vagrant" /f</CommandLine>
+                    <Order>13</Order>
+                    <Description>Enable AutoLogon</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>%SystemRoot%\System32\reg.exe ADD "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v AutoAdminLogon /t REG_SZ /d 1 /f</CommandLine>
+                    <Order>14</Order>
+                    <Description>Enable AutoLogon</Description>
+                </SynchronousCommand>
+                <!-- WITHOUT WINDOWS UPDATES -->
+                <!--
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File a:\enable-winrm.ps1</CommandLine>
+                    <Description>Enable WinRM</Description>
+                    <Order>99</Order>
+                </SynchronousCommand>
+                -->
+                <!-- END WITHOUT WINDOWS UPDATES -->
+                <!-- WITH WINDOWS UPDATES -->
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c a:\microsoft-updates.bat</CommandLine>
+                    <Order>98</Order>
+                    <Description>Enable Microsoft Updates</Description>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File a:\disable-screensaver.ps1</CommandLine>
+                    <Description>Disable Screensaver</Description>
+                    <Order>99</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <SynchronousCommand wcm:action="add">
+                    <CommandLine>cmd.exe /c C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File a:\win-updates.ps1</CommandLine>
+                    <Description>Install Windows Updates</Description>
+                    <Order>100</Order>
+                    <RequiresUserInput>true</RequiresUserInput>
+                </SynchronousCommand>
+                <!-- END WITH WINDOWS UPDATES -->
+            </FirstLogonCommands>
+            <ShowWindowsLive>false</ShowWindowsLive>
+        </component>
+    </settings>
+    <settings pass="specialize">
+        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+            <OEMInformation>
+                <HelpCustomized>false</HelpCustomized>
+            </OEMInformation>
+            <!-- Rename computer here. -->
+            <ComputerName>vagrant-11</ComputerName>
+            <TimeZone>Pacific Standard Time</TimeZone>
+            <RegisteredOwner/>
+        </component>
+        <component xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
+            <SkipAutoActivation>true</SkipAutoActivation>
+        </component>
+    </settings>
+    <cpi:offlineImage xmlns:cpi="urn:schemas-microsoft-com:cpi" cpi:source="catalog:d:/sources/install_windows 7 ENTERPRISE.clg"/>
+</unattend>

scripts/packer/build_windows_10.bat

@@ -0,0 +1,3 @@
+@echo off
+
+packer build --force --only=%~1-iso windows_10.json

scripts/packer/build_windows_10.sh

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+packer build --force --only=$1-iso windows_10.json

scripts/packer/build_windows_11.bat

@@ -0,0 +1,4 @@
+@echo off
+
+packer build --only=%1-iso windows_11.json
+

scripts/packer/build_windows_11.sh

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+packer build --only=$1-iso windows_11.json
+

scripts/packer/floppy/ReadMe.txt

@@ -0,0 +1,38 @@
+: Release v1.2 - Stuart Pearson 16th Nov 2015
+:
+: Command line tool to pin and unpin exe / lnk files to the Windows 10 taskbar and start menu.
+:
+: PinTo10 is a command line tool to pin and unpin .exe or .lnk files to or from the Windows 10 taskbar and start menu.
+: With it you can pin or unpin up to 10 different shortcuts to either the taskbar or start menu in one run of the command.
+: It replaces functionality that Microsoft have removed from their Windows 10 scripting interface.
+:
+: The exe needs to be run with at least one pair of switches specified for each function to Pin / Unpin to Taskbar / Start Menu...
+:
+: To pin an application or shortcut to the taskbar (replace XX with 01-10)...
+: /PTFOLXX: Followed by the folder containing the file you want to pin.
+: /PTFILEXX: Followed by the name of the file you want to pin.
+:
+: To unpin an application or shortcut to the taskbar (replace XX with 01-10)...
+: /UTFOLXX: Followed by the folder containing the file you want to unpin.
+: /UTFILEXX: Followed by the name of the file you want to unpin.
+
+: To pin an application or shortcut to the start menu (replace XX with 01-10)...
+: /PSFOLXX: Followed by the folder containing the file you want to pin.
+: /PSFILEXX: Followed by the name of the file you want to pin.
+
+: To unpin an application or shortcut to the start menu (replace XX with 01-10)...
+: /USFOLXX: Followed by the folder containing the file you want to unpin.
+: /USFILEXX: Followed by the name of the file you want to unpin.
+
+
+: Example for pinning two shortcuts to the taskbar...
+PinTo10.exe /PTFOL01:'%USERPROFILE:%\Desktop' /PTFILE01:'Word 2016.lnk' /PTFOL02:'%USERPROFILE:%\Desktop' /PTFILE02:'Excel 2016.lnk'
+
+: Example for unpinning a file to the taskbar...
+PinTo10.exe /UTFOL01:'C\Windows' /UTFILE01:'notepad.exe'
+
+: Example for pinning a file to the start menu...
+PinTo10.exe /PSFOL01:'C\Windows' /PSFILE01:'notepad.exe'
+
+: Example for unpinning a file from the start menu...
+PinTo10.exe /USFOL01:'%USERPROFILE:%\Desktop' /USFILE01:'Word 2016.lnk'

scripts/packer/iso/README.md

@@ -0,0 +1,26 @@
+### What Is This Directory For?
+
+You should download your Windows Server ISO images from TechNet/MSDN and place them in this folder. We need to do this because MSDN / TechNet are protected by Microsoft (Live) ID, which does not support HTTP basic authentication or the OAuth2 username / password flow.
+
+For example, you might want to start with one of the following:
+
+* Windows Server 2008 R2 + SP1:
+	* File Name: en_windows_server_2008_r2_with_sp1_x64_dvd_617601.iso
+	* SHA1 Hash: D3FD7BF85EE1D5BDD72DE5B2C69A7B470733CD0A
+	* Direct Download: http://msdn.microsoft.com/subscriptions/json/GetDownloadRequest?brand=MSDN&locale=en-us&fileId=44782&activexDisabled=true&akamaiDL=false
+* Windows Server 2008 R2 + SP1 (Volume License):
+	* File Name: en_windows_server_2008_r2_with_sp1_vl_build_x64_dvd_617403.iso
+	* SHA1 Hash: 7E7E9425041B3328CCF723A0855C2BC4F462EC57
+	* Direct Download: http://msdn.microsoft.com/subscriptions/json/GetDownloadRequest?brand=MSDN&locale=en-us&fileId=44783&activexDisabled=true&akamaiDL=false
+* Windows Server 2012:
+	* File Name: en_windows_server_2012_x64_dvd_915478.iso
+	* SHA1 Hash: D09E752B1EE480BC7E93DFA7D5C3A9B8AAC477BA
+	* Direct Download: http://msdn.microsoft.com/subscriptions/json/GetDownloadRequest?brand=MSDN&locale=en-us&fileId=50539&activexDisabled=true&akamaiDL=false
+* Windows Server 2012 (Volume License):
+	* File Name: en_windows_server_2012_vl_x64_dvd_917758.iso
+	* SHA1 Hash: 063BC26ED45C50D3745CCAD52DD7B3F3CE13F36D
+	* Direct Download: http://msdn.microsoft.com/subscriptions/json/GetDownloadRequest?brand=MSDN&locale=en-us&fileId=50573&activexDisabled=true&akamaiDL=false
+
+Or Build one using the Windows Installation Media Creation Tools:
+
+https://support.microsoft.com/en-us/windows/create-installation-media-for-windows-99a58364-8c02-206f-aa6f-40c3b507420d

scripts/packer/scripts/chocolatey.bat

@@ -0,0 +1 @@
+powershell -NoProfile -ExecutionPolicy unrestricted -Command "[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; iex ((new-object net.webclient).DownloadString('https://chocolatey.org/install.ps1'))"

scripts/packer/scripts/chocopacks.ps1

@@ -0,0 +1,26 @@
+choco install -y boxstarter.winconfig
+
+# Editors
+choco install -y notepadplusplus
+
+# Terminals
+choco install -y microsoft-windows-terminal
+choco install -y fluent-terminal
+choco install -y hyper
+choco install -y tabby
+choco install -y conemu
+
+# other
+choco install -y poshgit
+
+# IDE/Software development
+choco install -y vscode
+choco install -y visualstudio2022community --execution-timeout 9000 --package-parameters "--add Microsoft.VisualStudio.Workload.NativeDesktop;includeRecommended"
+
+md C:\users\vagrant\bin
+if (test-path "a:/set-shortcut.ps1") {
+  copy "a:/set-shortcut.ps1" C:\users\vagrant\bin
+} elseif (test-path "e:/set-shortcut.ps1") {
+  copy "e:/set-shortcut.ps1" C:\users\vagrant\bin
+}
+

scripts/packer/scripts/compact.bat

@@ -0,0 +1,39 @@
+if "%PACKER_BUILDER_TYPE:~0,6%"=="hyperv" (
+  echo "Skip compact steps in Hyper-V build."
+  goto :eof
+)
+if not exist "C:\Windows\Temp\7z1900-x64.msi" (
+	powershell -Command "(New-Object System.Net.WebClient).DownloadFile('https://www.7-zip.org/a/7z1900-x64.msi', 'C:\Windows\Temp\7z1900-x64.msi')" <NUL
+)
+msiexec /qb /i C:\Windows\Temp\7z1900-x64.msi
+
+if not exist "C:\Windows\Temp\ultradefrag.zip" (
+	powershell -Command "[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; (New-Object System.Net.WebClient).DownloadFile('https://downloads.sourceforge.net/project/ultradefrag/stable-release/6.1.0/ultradefrag-portable-6.1.0.bin.amd64.zip', 'C:\Windows\Temp\ultradefrag.zip')" <NUL
+)
+
+if not exist "C:\Windows\Temp\ultradefrag-portable-6.1.0.amd64\udefrag.exe" (
+	cmd /c ""C:\Program Files\7-Zip\7z.exe" x C:\Windows\Temp\ultradefrag.zip -oC:\Windows\Temp"
+)
+
+if not exist "C:\Windows\Temp\SDelete.zip" (
+  powershell -Command "(New-Object System.Net.WebClient).DownloadFile('https://download.sysinternals.com/files/SDelete.zip', 'C:\Windows\Temp\SDelete.zip')" <NUL
+  powershell -Command "(New-Object System.Net.WebClient).DownloadFile('https://vagrantboxes.blob.core.windows.net/box/sdelete/v1.6.1/sdelete.exe', 'C:\Windows\Temp\sdelete.exe')" <NUL
+)
+
+if not exist "C:\Windows\Temp\sdelete.exe" (
+	cmd /c ""C:\Program Files\7-Zip\7z.exe" x C:\Windows\Temp\SDelete.zip -oC:\Windows\Temp"
+)
+
+msiexec /qb /x C:\Windows\Temp\7z1900-x64.msi
+
+net stop wuauserv
+rmdir /S /Q C:\Windows\SoftwareDistribution\Download
+mkdir C:\Windows\SoftwareDistribution\Download
+net start wuauserv
+
+if "%PACKER_BUILDER_TYPE%" neq "hyperv-iso" (
+	cmd /c C:\Windows\Temp\ultradefrag-portable-6.1.0.amd64\udefrag.exe --optimize --repeat C:
+
+	cmd /c %SystemRoot%\System32\reg.exe ADD HKCU\Software\Sysinternals\SDelete /v EulaAccepted /t REG_DWORD /d 1 /f
+	cmd /c C:\Windows\Temp\sdelete.exe -q -z C:
+)

scripts/packer/scripts/compile-dotnet-assemblies.bat

@@ -0,0 +1,17 @@
+::http://support.microsoft.com/kb/2570538
+::http://robrelyea.wordpress.com/2007/07/13/may-be-helpful-ngen-exe-executequeueditems/
+
+if "%PROCESSOR_ARCHITECTURE%"=="AMD64" goto 64BIT
+
+%windir%\microsoft.net\framework\v4.0.30319\ngen.exe update /force /queue > NUL
+%windir%\microsoft.net\framework\v4.0.30319\ngen.exe executequeueditems > NUL
+
+exit 0
+
+:64BIT
+%windir%\microsoft.net\framework\v4.0.30319\ngen.exe update /force /queue > NUL
+%windir%\microsoft.net\framework64\v4.0.30319\ngen.exe update /force /queue > NUL
+%windir%\microsoft.net\framework\v4.0.30319\ngen.exe executequeueditems > NUL
+%windir%\microsoft.net\framework64\v4.0.30319\ngen.exe executequeueditems > NUL
+
+exit 0

scripts/packer/scripts/debloat-windows.ps1

@@ -0,0 +1,33 @@
+if ($env:PACKER_BUILDER_TYPE -And $($env:PACKER_BUILDER_TYPE).startsWith("hyperv")) {
+  Write-Output Skip debloat steps in Hyper-V build.
+}
+else {
+  Write-Output Downloading debloat zip
+  [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12
+  $url = "https://github.com/StefanScherer/Debloat-Windows-10/archive/master.zip"
+  (New-Object System.Net.WebClient).DownloadFile($url, "$env:TEMP\debloat.zip")
+  Expand-Archive -Path $env:TEMP\debloat.zip -DestinationPath $env:TEMP -Force
+
+  #Write-Output Disable scheduled tasks
+  #. $env:TEMP\Debloat-Windows-10-master\utils\disable-scheduled-tasks.ps1
+  #Write-Output Block telemetry
+  #. $env:TEMP\Debloat-Windows-10-master\scripts\block-telemetry.ps1
+  #Write-Output Disable services
+  #. $env:TEMP\Debloat-Windows-10-master\scripts\disable-services.ps1
+  Write-Output Disable Windows Defender
+  if ($(Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion").ProductName.StartsWith("Windows 10")) {
+    . $env:TEMP\Debloat-Windows-10-master\scripts\disable-windows-defender.ps1
+  }
+  else {
+    Uninstall-WindowsFeature Windows-Defender
+  }
+  Write-Output Optimize Windows Update
+  . $env:TEMP\Debloat-Windows-10-master\scripts\optimize-windows-update.ps1
+  #Write-Output Disable Windows Update
+  #Set-Service wuauserv -StartupType Disabled
+  #Write-Output Remove OneDrive
+  #. $env:TEMP\Debloat-Windows-10-master\scripts\remove-onedrive.ps1
+
+  Remove-Item $env:TEMP\debloat.zip
+  Remove-Item -recurse $env:TEMP\Debloat-Windows-10-master
+}

scripts/packer/scripts/dis-updates.bat

@@ -0,0 +1,20 @@
+rem http://www.windows-commandline.com/disable-automatic-updates-command-line/
+reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update" /v AUOptions /t REG_DWORD /d 1 /f
+
+rem remove optional WSUS server settings
+reg delete "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate" /f
+
+rem even harder, disable windows update service
+rem sc config wuauserv start= disabled
+rem net stop wuauserv
+set logfile=C:\Windows\Temp\win-updates.log
+
+if exist %logfile% (
+  echo Show Windows Updates log file %logfile%
+  dir %logfile%
+  type %logfile%
+  rem output of type command is not fully shown in packer/ssh session, so try PowerShell
+  rem but it will hang if log file is about 22 KByte
+  rem powershell -command "Get-Content %logfile%"
+  echo End of Windows Updates log file %logfile%
+)

scripts/packer/scripts/disable-screensaver.ps1

@@ -0,0 +1,4 @@
+Write-Output "Disabling Screensaver"
+Set-ItemProperty "HKCU:\Control Panel\Desktop" -Name ScreenSaveActive -Value 0 -Type DWord
+& powercfg -x -monitor-timeout-ac 0
+& powercfg -x -monitor-timeout-dc 0

scripts/packer/scripts/disable-winrm.ps1

@@ -0,0 +1,8 @@
+netsh advfirewall firewall set rule name="Windows Remote Management (HTTP-In)" new enable=yes action=block
+netsh advfirewall firewall set rule group="Windows Remote Management" new enable=yes
+$winrmService = Get-Service -Name WinRM
+if ($winrmService.Status -eq "Running") {
+  Disable-PSRemoting -Force
+}
+Stop-Service winrm
+Set-Service -Name winrm -StartupType Disabled

scripts/packer/scripts/docker/disable-windows-defender.ps1

@@ -0,0 +1,4 @@
+$DefenderInstalled = Get-Command -Module Defender
+if($null -ne $DefenderInstalled) {
+    Set-MpPreference -DisableRealtimeMonitoring $true
+}

scripts/packer/scripts/enable-rdp.bat

@@ -0,0 +1,2 @@
+netsh advfirewall firewall add rule name="Open Port 3389" dir=in action=allow protocol=TCP localport=3389
+reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" /v fDenyTSConnections /t REG_DWORD /d 0 /f

scripts/packer/scripts/enable-winrm.ps1

@@ -0,0 +1,27 @@
+write-host "==> 'enable-winrm.ps1' - START..."
+write-host "====> Getting Connections..."
+Get-NetConnectionProfile | Set-NetConnectionProfile -NetworkCategory Private
+
+write-host "====> Enable PSRemoting..."
+Enable-PSRemoting -Force
+
+write-host "====> WINRM Quick Config..."
+winrm quickconfig -q
+winrm quickconfig -transport:http
+
+write-host "====> WINRM Set Config..."
+winrm set winrm/config '@{MaxTimeoutms="1800000"}'
+winrm set winrm/config/winrs '@{MaxMemoryPerShellMB="800"}'
+winrm set winrm/config/service '@{AllowUnencrypted="true"}'
+winrm set winrm/config/service/auth '@{Basic="true"}'
+winrm set winrm/config/client/auth '@{Basic="true"}'
+winrm set winrm/config/listener?Address=*+Transport=HTTP '@{Port="5985"}'
+
+write-host "====> Configure Firewall..."
+netsh advfirewall firewall set rule group="Windows Remote Administration" new enable=yes
+netsh advfirewall firewall set rule name="Windows Remote Management (HTTP-In)" new enable=yes action=allow remoteip=any
+write-host "====> Set WINRM Service Statup..."
+Set-Service winrm -startuptype "auto"
+write-host "====> Restart WINRM Service..."
+Restart-Service winrm
+write-host "==> 'enable-winrm.ps1' - END..."

scripts/packer/scripts/fixnetwork.ps1

@@ -0,0 +1,30 @@
+# You cannot enable Windows PowerShell Remoting on network connections that are set to Public
+# Spin through all the network locations and if they are set to Public, set them to Private
+# using the INetwork interface:
+# http://msdn.microsoft.com/en-us/library/windows/desktop/aa370750(v=vs.85).aspx
+# For more info, see:
+# http://blogs.msdn.com/b/powershell/archive/2009/04/03/setting-network-location-to-private.aspx
+
+function Set-NetworkTypeToPrivate {
+  [Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSAvoidUsingPositionalParameters', '')]
+  param()
+  # Network location feature was only introduced in Windows Vista - no need to bother with this
+  # if the operating system is older than Vista
+  if ([environment]::OSVersion.version.Major -lt 6) { return }
+
+  # You cannot change the network location if you are joined to a domain, so abort
+  if (1, 3, 4, 5 -contains (Get-CimInstance win32_computersystem).DomainRole) { return }
+
+  # Get network connections
+  $networkListManager = [Activator]::CreateInstance([Type]::GetTypeFromCLSID([Guid]"{DCB00C01-570F-4A9B-8D69-199FDBA5723B}"))
+  $connections = $networkListManager.GetNetworkConnections()
+
+  $connections | ForEach-Object {
+    Write-Output $_.GetNetwork().GetName() "category was previously set to" $_.GetNetwork().GetCategory()
+    #$_.GetNetwork().SetCategory(1)
+    Write-Output $_.GetNetwork().GetName() "changed to category" $_.GetNetwork().GetCategory()
+  }
+
+}
+
+Set-NetworkTypeToPrivate

scripts/packer/scripts/microsoft-updates.bat

@@ -0,0 +1,12 @@
+net stop wuauserv
+
+reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update" /v EnableFeaturedSoftware /t REG_DWORD /d 1 /f
+
+reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update" /v IncludeRecommendedUpdates /t REG_DWORD /d 1 /f
+
+echo Set ServiceManager = CreateObject("Microsoft.Update.ServiceManager") > "%temp%\temp.vbs"
+echo Set NewUpdateService = ServiceManager.AddService2("7971f918-a847-4430-9279-4a52d1efe18d",7,"") >> "%temp%\temp.vbs"
+
+cscript "%temp%\temp.vbs"
+
+net start wuauserv

scripts/packer/scripts/microsoft-updates.ps1

@@ -0,0 +1,12 @@
+Stop-Service -Name 'wuauserv'
+
+Set-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update' -Name 'EnableFeaturedSoftware' -Value 1 -Type DWord
+Set-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update' -Name 'IncludeRecommendedUpdates' -Value 1 -Type DWord
+
+"Set ServiceManager = CreateObject(""Microsoft.Update.ServiceManager"")" | Out-File -FilePath 'C:\temp.vbs'
+"Set NewUpdateService = ServiceManager.AddService2(""7971f918-a847-4430-9279-4a52d1efe18d"",7,"""")" | Out-File -FilePath 'C:\temp.vbs' -Append
+
+cscript C:\temp.vbs
+Remove-Item -Path 'C:\temp.vbs' -Force
+
+Start-Service -Name 'wuauserv'

scripts/packer/scripts/pin-powershell.bat

@@ -0,0 +1,16 @@
+rem https://connect.microsoft.com/PowerShell/feedback/details/1609288/pin-to-taskbar-no-longer-working-in-windows-10
+
+set ps_link=A:\WindowsPowerShell.lnk
+if exist e:\WindowsPowerShell.lnk (
+  set ps_link=e:\WindowsPowerShell.lnk
+)
+
+set pin_to_10=A:\PinTo10.exe
+if exist e:\PinTo10.exe (
+  set pin_to_10=e:\PinTo10.exe
+)
+
+
+copy "%ps_link%" "%TEMP%\Windows PowerShell.lnk"
+%pin_to_10% /PTFOL01:'%TEMP%' /PTFILE01:'Windows PowerShell.lnk'
+exit /b 0

scripts/packer/scripts/set-powerplan.ps1

@@ -0,0 +1,19 @@
+Try {
+  Write-Output "Set power plan to high performance"
+
+  $HighPerf = powercfg -l | ForEach-Object { if ($_.contains("High performance")) { $_.split()[3] } }
+
+  # $HighPerf cannot be $null, we try activate this power profile with powercfg
+  if ($null -eq $HighPerf) {
+    throw "Error: HighPerf is null"
+  }
+
+  $CurrPlan = $(powercfg -getactivescheme).split()[3]
+
+  if ($CurrPlan -ne $HighPerf) { powercfg -setactive $HighPerf }
+
+}
+Catch {
+  Write-Warning -Message "Unable to set power plan to high performance"
+  Write-Warning $Error[0]
+}

scripts/packer/scripts/set-shortcut.ps1

@@ -0,0 +1,21 @@
+[CmdletBinding()]
+param(
+    [Parameter()]
+    [string]$SourceExe,
+    [string]$Arguments,
+    [string]$DestinationPath,
+    [string]$WorkingDirectory,
+    [String]$IconLocation
+)
+
+if ($IconLocation -eq '') {
+    $IconLocation = $SourceExe
+}
+
+$WshShell = New-Object -comObject WScript.Shell
+$Shortcut = $WshShell.CreateShortcut($destinationPath)
+$Shortcut.TargetPath = $SourceExe
+$Shortcut.Arguments = $Arguments
+$shortcut.WorkingDirectory = $WorkingDirectory
+$shortcut.IconLocation = $IconLocation
+$Shortcut.Save()

scripts/packer/scripts/set-winrm-automatic.bat

@@ -0,0 +1,2 @@
+echo Set WinRM start type to auto
+sc config winrm start= auto

scripts/packer/scripts/uac-enable.bat

@@ -0,0 +1 @@
+reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /f /v EnableLUA /t REG_DWORD /d 1

scripts/packer/scripts/vm-guest-tools.ps1

@@ -0,0 +1,96 @@
+if (!( Test-Path "C:\Windows\Temp\7z1900-x64.msi")) {
+  [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; (New-Object System.Net.WebClient).DownloadFile('https://www.7-zip.org/a/7z1900-x64.msi', 'C:\Windows\Temp\7z1900-x64.msi')
+}
+if (!(Test-Path "C:\Windows\Temp\7z1900-x64.msi")) {
+  Start-Sleep 5; [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; (New-Object System.Net.WebClient).DownloadFile('https://www.7-zip.org/a/7z1900-x64.msi', 'C:\Windows\Temp\7z1900-x64.msi')
+}
+cmd /c msiexec /qb /i C:\Windows\Temp\7z1900-x64.msi
+
+if ("$env:PACKER_BUILDER_TYPE" -eq "vmware-iso") {
+
+  Write-Output "Using VMware"
+  if (Test-Path "C:\Users\vagrant\windows.iso") {
+    Move-Item -force C:\Users\vagrant\windows.iso C:\Windows\Temp
+  }
+
+  if (!(Test-Path "C:\Windows\Temp\windows.iso")) {
+    Try {
+      # Disabling the progress bar speeds up IWR https://github.com/PowerShell/PowerShell/issues/2138
+      $ProgressPreference = 'SilentlyContinue'
+      $pageContentLinks = (Invoke-WebRequest('https://softwareupdate.vmware.com/cds/vmw-desktop/ws') -UseBasicParsing).Links | where-object { $_.href -Match "[0-9]" } | Select-Object href | ForEach-Object { $_.href.Trim('/') }
+      $versionObject = $pageContentLinks | ForEach-Object { new-object System.Version ($_) } | sort-object -Descending | select-object -First 1 -Property:Major, Minor, Build
+      $newestVersion = $versionObject.Major.ToString() + "." + $versionObject.Minor.ToString() + "." + $versionObject.Build.ToString() | out-string
+      $newestVersion = $newestVersion.TrimEnd("`r?`n")
+
+      $nextURISubdirectoryObject = (Invoke-WebRequest("https://softwareupdate.vmware.com/cds/vmw-desktop/ws/$newestVersion/") -UseBasicParsing).Links | where-object { $_.href -Match "[0-9]" } | Select-Object href | where-object { $_.href -Match "[0-9]" }
+      $nextUriSubdirectory = $nextURISubdirectoryObject.href | Out-String
+      $nextUriSubdirectory = $nextUriSubdirectory.TrimEnd("`r?`n")
+      $newestVMwareToolsURL = "https://softwareupdate.vmware.com/cds/vmw-desktop/ws/$newestVersion/$nextURISubdirectory/windows/packages/tools-windows.tar"
+      Write-Output "The latest version of VMware tools has been determined to be downloadable from $newestVMwareToolsURL"
+      [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; (New-Object System.Net.WebClient).DownloadFile("$newestVMwareToolsURL", 'C:\Windows\Temp\vmware-tools.tar')
+    }
+    Catch {
+      Write-Output "Unable to determine the latest version of VMware tools. Falling back to hardcoded URL."
+      (New-Object System.Net.WebClient).DownloadFile('https://softwareupdate.vmware.com/cds/vmw-desktop/ws/15.5.5/16285975/windows/packages/tools-windows.tar', 'C:\Windows\Temp\vmware-tools.tar')
+    }
+    cmd /c "C:\PROGRA~1\7-Zip\7z.exe" x C:\Windows\Temp\vmware-tools.tar -oC:\Windows\Temp
+    Move-Item c:\windows\temp\VMware-tools-windows-*.iso c:\windows\temp\windows.iso
+    Try { Remove-Item "C:\Program Files (x86)\VMWare" -Recurse -Force -ErrorAction Stop } Catch { Write-Output "Directory didn't exist to be removed." }
+  }
+
+  cmd /c "C:\PROGRA~1\7-Zip\7z.exe" x "C:\Windows\Temp\windows.iso" -oC:\Windows\Temp\VMWare
+  cmd /c C:\Windows\Temp\VMWare\setup.exe /S /v"/qn REBOOT=R\"
+
+  Remove-Item -Force "C:\Windows\Temp\vmware-tools.tar"
+  Remove-Item -Force "C:\Windows\Temp\windows.iso"
+  Remove-Item -Force -Recurse "C:\Windows\Temp\VMware"
+}
+
+if ("$env:PACKER_BUILDER_TYPE" -eq "virtualbox-iso") {
+  Write-Output "Using Virtualbox"
+  if (Test-Path "C:\Users\vagrant\VBoxGuestAdditions.iso") {
+    Move-Item -Force C:\Users\vagrant\VBoxGuestAdditions.iso C:\Windows\Temp
+  }
+
+  if (!(Test-Path "C:\Windows\Temp\VBoxGuestAdditions.iso")) {
+    Try {
+      $pageContentLinks = (Invoke-WebRequest('https://download.virtualbox.org/virtualbox') -UseBasicParsing).Links | where-object { $_.href -Match "[0-9]" } | Select-Object href |  where-object { $_.href -NotMatch "BETA" } |  where-object { $_.href -NotMatch "RC" } |   where-object { $_.href -Match "[0-9]\.[0-9]" } | ForEach-Object { $_.href.Trim('/') }
+      $versionObject = $pageContentLinks | ForEach-Object { new-object System.Version ($_) } | sort-object -Descending | select-object -First 1 -Property:Major, Minor, Build
+      $newestVersion = $versionObject.Major.ToString() + "." + $versionObject.Minor.ToString() + "." + $versionObject.Build.ToString() | out-string
+      $newestVersion = $newestVersion.TrimEnd("`r?`n")
+
+      $nextURISubdirectoryObject = (Invoke-WebRequest("https://download.virtualbox.org/virtualbox/$newestVersion/") -UseBasicParsing).Links | Select-Object href | where-object { $_.href -Match "GuestAdditions" }
+      $nextUriSubdirectory = $nextURISubdirectoryObject.href | Out-String
+      $nextUriSubdirectory = $nextUriSubdirectory.TrimEnd("`r?`n")
+      $newestVboxToolsURL = "https://download.virtualbox.org/virtualbox/$newestVersion/$nextUriSubdirectory"
+      Write-Output "The latest version of VirtualBox tools has been determined to be downloadable from $newestVboxToolsURL"
+      [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; (New-Object System.Net.WebClient).DownloadFile("$newestVboxToolsURL", 'C:\Windows\Temp\VBoxGuestAdditions.iso')
+    }
+    Catch {
+      Write-Output "Unable to determine the latest version of VBox tools. Falling back to hardcoded URL."
+      [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; (New-Object System.Net.WebClient).DownloadFile('https://download.virtualbox.org/virtualbox/6.1.8/VBoxGuestAdditions_6.1.8.iso', 'C:\Windows\Temp\VBoxGuestAdditions.iso')
+    }
+  }
+
+  cmd /c ""C:\PROGRA~1\7-Zip\7z.exe" x C:\Windows\Temp\VBoxGuestAdditions.iso -oC:\Windows\Temp\virtualbox"
+  Get-ChildItem "C:\Windows\Temp\virtualbox\cert\" -Filter vbox*.cer | Foreach-Object { C:\Windows\Temp\virtualbox\cert\VBoxCertUtil add-trusted-publisher $_.FullName --root $_.FullName }
+  cmd /c C:\Windows\Temp\virtualbox\VBoxWindowsAdditions.exe /S
+  cmd /c rd /S /Q "C:\Windows\Temp\virtualbox"
+}
+
+if ("$env:PACKER_BUILDER_TYPE" -eq "parallels-iso") {
+  Write-Output "Using Parallels Desktop"
+  # This is required when using Parallels Desktop
+  # Currently the installation of Parallels Tools is broken if you're installing in Windows Server & Windows Server Core
+  # You will encounter an error in printui.dll module not found message.
+  # This feature will add the required libraries for printing services.
+
+  # Parallels Tools is required for sync_folder to work.
+  # Vagrantfile config: v.update_guest_tools = true will be installed with no issues
+  if ($(Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion").ProductName.StartsWith("Windows Server")) {
+    Write-Output "Installing Print Server service"
+    Install-WindowsFeature -Name Print-Server
+  }  
+}
+
+cmd /c msiexec /qb /x C:\Windows\Temp\7z1900-x64.msi

scripts/packer/scripts/win-updates.ps1

@@ -0,0 +1,260 @@
+[Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSReviewUnusedParameter', '')]
+param($global:RestartRequired = 0,
+  $global:MoreUpdates = 0,
+  $global:MaxCycles = 5,
+  $MaxUpdatesPerCycle = 500,
+  $BeginWithRestart = 0)
+
+$Logfile = "C:\Windows\Temp\win-updates.log"
+
+$enable_winrm_script = 'a:\enable-winrm.ps1'
+if (test-path 'e:\enable-winrm.ps1') {
+  $enable_winrm_script = 'e:\enable-winrm.ps1'
+}
+
+function LogWrite {
+  Param ([string]$logstring)
+  $now = Get-Date -format s
+  Add-Content $Logfile -value "$now $logstring"
+  Write-Output $logstring
+}
+
+function Check-ContinueRestartOrEnd() {
+  $RegistryKey = "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Run"
+  $RegistryEntry = "InstallWindowsUpdates"
+  switch ($global:RestartRequired) {
+    0 {
+      $prop = (Get-ItemProperty $RegistryKey).$RegistryEntry
+      if ($prop) {
+        LogWrite "Restart Registry Entry Exists - Removing It"
+        Remove-ItemProperty -Path $RegistryKey -Name $RegistryEntry -ErrorAction SilentlyContinue
+      }
+
+      LogWrite "No Restart Required"
+      Check-WindowsUpdates
+
+      if (($global:MoreUpdates -eq 1) -and ($script:Cycles -le $global:MaxCycles)) {
+        Install-WindowsUpdates
+      }
+      elseif ($script:Cycles -gt $global:MaxCycles) {
+        LogWrite "Exceeded Cycle Count - Stopping"
+        LogWrite "==> Running '$enable_winrm_script'..."
+        & $enable_winrm_script
+      }
+      else {
+        LogWrite "Done Installing Windows Updates"
+        LogWrite "==> Running '$enable_winrm_script'..."
+        & $enable_winrm_script
+      }
+    }
+    1 {
+      $prop = (Get-ItemProperty $RegistryKey).$RegistryEntry
+      if (-not $prop) {
+        LogWrite "Restart Registry Entry Does Not Exist - Creating It"
+        Set-ItemProperty -Path $RegistryKey -Name $RegistryEntry -Value "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File $($script:ScriptPath) -MaxUpdatesPerCycle $($MaxUpdatesPerCycle)"
+      }
+      else {
+        LogWrite "Restart Registry Entry Exists Already"
+      }
+
+      LogWrite "Restart Required - Restarting..."
+      Restart-Computer
+    }
+    default {
+      LogWrite "Unsure If A Restart Is Required"
+      break
+    }
+  }
+}
+
+function Install-WindowsUpdates()
+ {
+  [Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSUseDeclaredVarsMoreThanAssignments', '')]
+  [Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSUseSingularNouns', '')]
+  param()
+  $script:Cycles++
+  LogWrite "Evaluating Available Updates with limit of $($MaxUpdatesPerCycle):"
+  $UpdatesToDownload = New-Object -ComObject 'Microsoft.Update.UpdateColl'
+  $script:i = 0;
+  $CurrentUpdates = $SearchResult.Updates
+  while ($script:i -lt $CurrentUpdates.Count -and $script:CycleUpdateCount -lt $MaxUpdatesPerCycle) {
+    $Update = $CurrentUpdates.Item($script:i)
+    if ($null -ne $Update) {
+      [bool]$addThisUpdate = $false
+      if ($Update.InstallationBehavior.CanRequestUserInput) {
+        LogWrite "> Skipping: $($Update.Title) because it requires user input"
+      }
+      else {
+        if (!($Update.EulaAccepted)) {
+          LogWrite "> Note: $($Update.Title) has a license agreement that must be accepted. Accepting the license."
+          $Update.AcceptEula()
+          [bool]$addThisUpdate = $true
+          $script:CycleUpdateCount++
+        }
+        else {
+          [bool]$addThisUpdate = $true
+          $script:CycleUpdateCount++
+        }
+      }
+
+      if ([bool]$addThisUpdate) {
+        LogWrite "Adding: $($Update.Title)"
+        $UpdatesToDownload.Add($Update) | Out-Null
+      }
+    }
+    $script:i++
+  }
+
+  if ($UpdatesToDownload.Count -eq 0) {
+    LogWrite "No Updates To Download..."
+  }
+  else {
+    LogWrite 'Downloading Updates...'
+    $ok = 0;
+    while (! $ok) {
+      try {
+        $Downloader = $UpdateSession.CreateUpdateDownloader()
+        $Downloader.Updates = $UpdatesToDownload
+        $Downloader.Download()
+        $ok = 1;
+      }
+      catch {
+        LogWrite $_.Exception | Format-List -force
+        LogWrite "Error downloading updates. Retrying in 30s."
+        $script:attempts = $script:attempts + 1
+        Start-Sleep -s 30
+      }
+    }
+  }
+
+  $UpdatesToInstall = New-Object -ComObject 'Microsoft.Update.UpdateColl'
+  [bool]$rebootMayBeRequired = $false
+  LogWrite 'The following updates are downloaded and ready to be installed:'
+  foreach ($Update in $SearchResult.Updates) {
+    if (($Update.IsDownloaded)) {
+      LogWrite "> $($Update.Title)"
+      $UpdatesToInstall.Add($Update) | Out-Null
+
+      if ($Update.InstallationBehavior.RebootBehavior -gt 0) {
+        [bool]$rebootMayBeRequired = $true
+      }
+    }
+  }
+
+  if ($UpdatesToInstall.Count -eq 0) {
+    LogWrite 'No updates available to install...'
+    $global:MoreUpdates = 0
+    $global:RestartRequired = 0
+    LogWrite "==> Running '$enable_winrm_script'..."
+    & $enable_winrm_script
+    break
+  }
+
+  if ($rebootMayBeRequired) {
+    LogWrite 'These updates may require a reboot'
+    $global:RestartRequired = 1
+  }
+
+  LogWrite 'Installing updates...'
+
+  $Installer = $script:UpdateSession.CreateUpdateInstaller()
+  $Installer.Updates = $UpdatesToInstall
+  $InstallationResult = $Installer.Install()
+
+  LogWrite "Installation Result: $($InstallationResult.ResultCode)"
+  LogWrite "Reboot Required: $($InstallationResult.RebootRequired)"
+  LogWrite 'Listing of updates installed and individual installation results:'
+  if ($InstallationResult.RebootRequired) {
+    $global:RestartRequired = 1
+  }
+  else {
+    $global:RestartRequired = 0
+  }
+
+  for ($i = 0; $i -lt $UpdatesToInstall.Count; $i++) {
+    New-Object -TypeName PSObject -Property @{
+      Title  = $UpdatesToInstall.Item($i).Title
+      Result = $InstallationResult.GetUpdateResult($i).ResultCode
+    }
+    LogWrite "Item: $($UpdatesToInstall.Item($i).Title)"
+    LogWrite "Result: $($InstallationResult.GetUpdateResult($i).ResultCode)"
+  }
+
+  Check-ContinueRestartOrEnd
+}
+
+function Check-WindowsUpdates() {
+  [Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSUseDeclaredVarsMoreThanAssignments', '')]
+  [Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSUseSingularNouns', '')]
+  param()
+  LogWrite "Checking For Windows Updates"
+  $Username = $env:USERDOMAIN + "\" + $env:USERNAME
+  LogWrite "Script: $script:ScriptPath `nScript User: $Username `nStarted: $(Get-Date)"
+
+  $script:UpdateSearcher = $script:UpdateSession.CreateUpdateSearcher()
+  $script:successful = $FALSE
+  $script:attempts = 0
+  $script:maxAttempts = 12
+  while (-not $script:successful -and $script:attempts -lt $script:maxAttempts) {
+    try {
+      $script:SearchResult = $script:UpdateSearcher.Search("IsInstalled=0 and Type='Software' and IsHidden=0")
+      $script:successful = $TRUE
+    }
+    catch {
+      LogWrite $_.Exception | Format-List -force
+      LogWrite "Search call to UpdateSearcher was unsuccessful. Retrying in 10s."
+      $script:attempts = $script:attempts + 1
+      Start-Sleep -s 10
+    }
+  }
+
+  if ($SearchResult.Updates.Count -ne 0) {
+    $Message = "There are " + $SearchResult.Updates.Count + " more updates."
+    LogWrite $Message
+    try {
+      for ($i = 0; $i -lt $script:SearchResult.Updates.Count; $i++) {
+        LogWrite $script:SearchResult.Updates.Item($i).Title
+        LogWrite $script:SearchResult.Updates.Item($i).Description
+        LogWrite $script:SearchResult.Updates.Item($i).RebootRequired
+        LogWrite $script:SearchResult.Updates.Item($i).EulaAccepted
+      }
+      $global:MoreUpdates = 1
+    }
+    catch {
+      LogWrite $_.Exception | Format-List -force
+      LogWrite "Showing SearchResult was unsuccessful. Rebooting."
+      $global:RestartRequired = 1
+      $global:MoreUpdates = 0
+      Check-ContinueRestartOrEnd
+      LogWrite "Show never happen to see this text!"
+      Restart-Computer
+    }
+  }
+  else {
+    LogWrite 'There are no applicable updates'
+    $global:RestartRequired = 0
+    $global:MoreUpdates = 0
+  }
+}
+
+$script:ScriptName = $MyInvocation.MyCommand.ToString()
+$script:ScriptPath = $MyInvocation.MyCommand.Path
+$script:UpdateSession = New-Object -ComObject 'Microsoft.Update.Session'
+$script:UpdateSession.ClientApplicationID = 'Packer Windows Update Installer'
+$script:UpdateSearcher = $script:UpdateSession.CreateUpdateSearcher()
+$script:SearchResult = New-Object -ComObject 'Microsoft.Update.UpdateColl'
+$script:Cycles = 0
+$script:CycleUpdateCount = 0
+
+if ($BeginWithRestart) {
+  $global:RestartRequired = 1
+  Check-ContinueRestartOrEnd
+}
+
+Check-WindowsUpdates
+if ($global:MoreUpdates -eq 1) {
+  Install-WindowsUpdates
+}
+else {
+  Check-ContinueRestartOrEnd
+}

scripts/packer/vagrantfile-windows_10.template

@@ -0,0 +1,91 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+Vagrant.require_version ">= 1.6.2"
+
+Vagrant.configure("2") do |config|
+    config.vm.define "vagrant-windows-10-preview"
+    config.vm.box = "windows_10_preview"
+    config.vm.communicator = "winrm"
+
+    # Admin user name and password
+    config.winrm.username = "vagrant"
+    config.winrm.password = "vagrant"
+
+    config.vm.guest = :windows
+    config.windows.halt_timeout = 15
+
+    config.vm.network :forwarded_port, guest: 3389, host: 3389, id: "rdp", auto_correct: true
+
+    config.vm.provider :virtualbox do |v, override|
+        #v.gui = true
+        v.customize ["modifyvm", :id, "--memory", 2048]
+        v.customize ["modifyvm", :id, "--cpus", 2]
+        v.customize ["modifyvm", :id, "--vram", 128]
+        v.customize ["modifyvm", :id, "--clipboard", "bidirectional"]
+        v.customize ["setextradata", "global", "GUI/SuppressMessages", "all" ]
+    end
+
+    config.vm.provider :vmware_fusion do |v, override|
+        v.gui = true
+        v.vmx["memsize"] = "2048"
+        v.vmx["numvcpus"] = "2"
+        v.vmx["ethernet0.virtualDev"] = "vmxnet3"
+        v.vmx["RemoteDisplay.vnc.enabled"] = "false"
+        v.vmx["RemoteDisplay.vnc.port"] = "5900"
+        v.vmx["scsi0.virtualDev"] = "lsisas1068"
+        v.vmx["gui.fitguestusingnativedisplayresolution"] = "TRUE"
+        v.vmx["mks.enable3d"] = "TRUE"
+        v.vmx["mks.forceDiscreteGPU"] = "TRUE"
+        v.vmx["gui.fullscreenatpoweron"] = "TRUE"
+        v.vmx["gui.viewmodeatpoweron"] = "fullscreen"
+        v.vmx["gui.lastPoweredViewMode"] = "fullscreen"
+        v.vmx["sound.startconnected"] = "FALSE"
+        v.vmx["sound.present"] = "FALSE"
+        v.vmx["sound.autodetect"] = "TRUE"
+        v.enable_vmrun_ip_lookup = false
+        v.whitelist_verified = true
+        v.vmx["hgfs.linkRootShare"] = "FALSE"
+    end
+
+    config.vm.provider :vmware_workstation do |v, override|
+        v.gui = true
+        v.vmx["memsize"] = "2048"
+        v.vmx["numvcpus"] = "2"
+        v.vmx["ethernet0.virtualDev"] = "vmxnet3"
+        v.vmx["RemoteDisplay.vnc.enabled"] = "false"
+        v.vmx["RemoteDisplay.vnc.port"] = "5900"
+        v.vmx["scsi0.virtualDev"] = "lsisas1068"
+        v.enable_vmrun_ip_lookup = false
+        v.whitelist_verified = true
+        v.vmx["hgfs.linkRootShare"] = "FALSE"
+    end
+
+    config.vm.provider "hyperv" do |v|
+        v.cpus = 2
+        v.maxmemory = 2048
+        v.linked_clone = true
+    end
+    
+    config.vm.provider :libvirt do |libvirt, override|
+        libvirt.memory = 2048
+        libvirt.cpus = 2
+
+        # Use WinRM for the default synced folder; or disable it if
+        # WinRM is not available. Linux hosts don't support SMB,
+        # and Windows guests don't support NFS/9P/rsync
+        # See https://github.com/Cimpress-MCP/vagrant-winrm-syncedfolders
+        if Vagrant.has_plugin?("vagrant-winrm-syncedfolders")
+            override.vm.synced_folder ".", "/vagrant", type: "winrm"
+        else
+            override.vm.synced_folder ".", "/vagrant", disabled: true
+        end
+
+        # Enable Hyper-V enlightments, see
+        # https://blog.wikichoon.com/2014/07/enabling-hyper-v-enlightenments-with-kvm.html
+        libvirt.hyperv_feature :name => 'stimer',  :state => 'on'
+        libvirt.hyperv_feature :name => 'relaxed', :state => 'on'
+        libvirt.hyperv_feature :name => 'vapic',   :state => 'on'
+        libvirt.hyperv_feature :name => 'synic',   :state => 'on'
+    end
+end

scripts/packer/windows_10.json

@@ -0,0 +1,230 @@
+{
+  "builders": [
+    {
+      "boot_command": ["a<wait>a<wait>a"],
+      "boot_wait": "-1s",
+      "cd_files": [
+        "{{user `autounattend`}}",
+        "./floppy/WindowsPowershell.lnk",
+        "./floppy/PinTo10.exe",
+        "./scripts/fixnetwork.ps1",
+        "./scripts/disable-screensaver.ps1",
+        "./scripts/disable-winrm.ps1",
+        "./scripts/enable-winrm.ps1",
+        "./scripts/microsoft-updates.ps1",
+        "./scripts/win-updates.ps1",
+        "./scripts/set-shortcut.ps1"
+      ],
+      "communicator": "winrm",
+      "configuration_version": "10.0",
+      "cpus": "{{user `cpus`}}",
+      "disk_size": "{{user `disk_size`}}",
+      "enable_dynamic_memory": false,
+      "enable_mac_spoofing": true,
+      "enable_secure_boot": true,
+      "enable_virtualization_extensions": true,
+      "generation": "2",
+      "guest_additions_mode": "disable",
+      "iso_checksum": "{{user `iso_checksum`}}",
+      "iso_url": "{{user `iso_url`}}",
+      "memory": "{{user `memory`}}",
+      "shutdown_command": "shutdown /s /t 10 /f /d p:4:1 /c \"Packer Shutdown\"",
+      "switch_name": "Default Switch",
+      "type": "hyperv-iso",
+      "vm_name": "{{user `vm_name`}}",
+      "winrm_password": "vagrant",
+      "winrm_timeout": "{{ user `winrm_timeout` }}",
+      "winrm_username": "vagrant"
+    },
+    {
+      "boot_command": ["a<wait>a<wait>a"],
+      "boot_wait": "-1s",
+      "cd_files": [
+        "{{user `autounattend`}}",
+        "./floppy/WindowsPowershell.lnk",
+        "./floppy/PinTo10.exe",
+        "./scripts/fixnetwork.ps1",
+        "./scripts/disable-screensaver.ps1",
+        "./scripts/disable-winrm.ps1",
+        "./scripts/enable-winrm.ps1",
+        "./scripts/microsoft-updates.ps1",
+        "./scripts/win-updates.ps1",
+        "./scripts/set-shortcut.ps1"
+      ],
+      "communicator": "winrm",
+      "cpus": "{{user `cpus`}}",
+      "disk_adapter_type": "lsisas1068",
+      "disk_size": "{{user `disk_size`}}",
+      "disk_type_id": "1",
+      "guest_os_type": "windows9-64",
+      "headless": "{{user `headless`}}",
+      "iso_checksum": "{{user `iso_checksum`}}",
+      "iso_url": "{{user `iso_url`}}",
+      "memory": "{{user `memory`}}",
+      "shutdown_command": "shutdown /s /t 10 /f /d p:4:1 /c \"Packer Shutdown\"",
+      "type": "vmware-iso",
+      "version": "19",
+      "vm_name": "{{user `vm_name`}}",
+      "vmx_data": {
+        "firmware": "efi",
+        "RemoteDisplay.vnc.enabled": "false",
+        "RemoteDisplay.vnc.port": "5900"
+      },
+      "vmx_remove_ethernet_interfaces": true,
+      "vnc_port_max": 5980,
+      "vnc_port_min": 5900,
+      "winrm_password": "vagrant",
+      "winrm_timeout": "{{ user `winrm_timeout` }}",
+      "winrm_username": "vagrant"
+    },
+    {
+      "boot_command": ["a<wait>a<wait>a"],
+      "boot_wait": "-1s",
+      "cd_files": [
+        "{{user `autounattend`}}",
+        "./floppy/WindowsPowershell.lnk",
+        "./floppy/PinTo10.exe",
+        "./scripts/fixnetwork.ps1",
+        "./scripts/disable-screensaver.ps1",
+        "./scripts/disable-winrm.ps1",
+        "./scripts/enable-winrm.ps1",
+        "./scripts/microsoft-updates.ps1",
+        "./scripts/win-updates.ps1",
+        "./scripts/set-shortcut.ps1"
+      ],
+      "communicator": "winrm",
+      "cpus": "{{user `cpus`}}",
+      "disk_size": "{{user `disk_size`}}",
+      "firmware": "efi",
+      "guest_additions_mode": "disable",
+      "guest_os_type": "Windows10_64",
+      "headless": "{{user `headless`}}",
+      "iso_checksum": "{{user `iso_checksum`}}",
+      "iso_url": "{{user `iso_url`}}",
+      "memory": "{{user `memory`}}",
+      "shutdown_command": "shutdown /s /t 10 /f /d p:4:1 /c \"Packer Shutdown\"",
+      "type": "virtualbox-iso",
+      "vm_name": "{{user `vm_name`}}",
+      "winrm_password": "vagrant",
+      "winrm_timeout": "{{ user `winrm_timeout` }}",
+      "winrm_username": "vagrant"
+    },
+    {
+      "boot_command": "",
+      "boot_wait": "6m",
+      "communicator": "winrm",
+      "cpus": "{{user `cpus`}}",
+      "disk_size": "{{user `disk_size`}}",
+      "floppy_files": [
+        "{{user `autounattend`}}",
+        "./floppy/WindowsPowershell.lnk",
+        "./floppy/PinTo10.exe",
+        "./scripts/fixnetwork.ps1",
+        "./scripts/disable-screensaver.ps1",
+        "./scripts/disable-winrm.ps1",
+        "./scripts/enable-winrm.ps1",
+        "./scripts/microsoft-updates.ps1",
+        "./scripts/win-updates.ps1",
+        "./scripts/set-shortcut.ps1"
+      ],
+      "guest_os_type": "win-10",
+      "iso_checksum": "{{user `iso_checksum`}}",
+      "iso_url": "{{user `iso_url`}}",
+      "memory": "{{user `memory`}}",
+      "shutdown_command": "shutdown /s /t 10 /f /d p:4:1 /c \"Packer Shutdown\"",
+      "type": "parallels-iso",
+      "parallels_tools_flavor": "win",
+      "prlctl": [
+        [
+          "set",
+          "{{.Name}}",
+          "--efi-boot",
+          "off"
+        ]
+      ],
+      "vm_name": "{{user `vm_name`}}",
+      "winrm_password": "vagrant",
+      "winrm_timeout": "{{ user `winrm_timeout` }}",
+      "winrm_username": "vagrant"
+    }
+  ],
+  "post-processors": [
+    {
+      "keep_input_artifact": false,
+      "output": "cmderdev-10_{{.Provider}}.box",
+      "type": "vagrant",
+      "vagrantfile_template": "vagrantfile-windows_10.template"
+    }
+  ],
+  "provisioners": [
+    {
+      "execute_command": "{{ .Vars }} cmd /c \"{{ .Path }}\"",
+      "remote_path": "/tmp/script.bat",
+      "scripts": [
+        "./scripts/enable-rdp.bat"
+      ],
+      "type": "windows-shell"
+    },
+    {
+      "scripts": [
+        "./scripts/vm-guest-tools.ps1",
+        "./scripts/debloat-windows.ps1"
+      ],
+      "type": "powershell"
+    },
+    {
+      "restart_timeout": "{{user `restart_timeout`}}",
+      "type": "windows-restart"
+    },
+    {
+      "scripts": [
+        "./scripts/set-powerplan.ps1",
+        "./scripts/docker/disable-windows-defender.ps1"
+      ],
+      "type": "powershell"
+    },
+    {
+      "execute_command": "{{ .Vars }} cmd /c \"{{ .Path }}\"",
+      "remote_path": "/tmp/script.bat",
+      "scripts": [
+        "./scripts/chocolatey.bat"
+      ],
+      "type": "windows-shell"
+    },
+    {
+      "scripts": [
+        "./scripts/chocopacks.ps1"
+      ],
+      "type": "powershell"
+    },
+    {
+      "execute_command": "{{ .Vars }} cmd /c \"{{ .Path }}\"",
+      "remote_path": "/tmp/script.bat",
+      "scripts": [
+        "./scripts/pin-powershell.bat",
+        "./scripts/compile-dotnet-assemblies.bat",
+        "./scripts/set-winrm-automatic.bat",
+        "./scripts/uac-enable.bat",
+        "./scripts/dis-updates.bat",
+        "./scripts/compact.bat"
+      ],
+      "type": "windows-shell"
+    }
+  ],
+  "variables": {
+    "autounattend": "./answer_files/10_efi/Autounattend.xml",
+    "cpus": "2",
+    "disk_size": "262144",
+    "disk_type_id": "1",
+    "memory": "2048",
+    "headless": "false",
+    "iso_url": "./iso/Windows_10.iso",
+    "iso_checksum": "none",
+    "restart_timeout": "5m",
+    "vhv_enable": "false",
+    "virtio_win_iso": "~/virtio-win.iso",
+    "vm_name": "cmderdev10",
+    "winrm_timeout": "6h",
+    "vmx_version": "14"
+  }
+}

scripts/packer/windows_11.json

@@ -0,0 +1,249 @@
+{
+  "builders": [
+    {
+      "boot_command": [
+        "<leftShiftOn><f10><leftShiftOff><wait>",
+        "reg add HKLM\\SYSTEM\\Setup\\LabConfig /t REG_DWORD /v BypassTPMCheck /d 1<return>",
+        "reg add HKLM\\SYSTEM\\Setup\\LabConfig /t REG_DWORD /v BypassSecureBootCheck /d 1<return><wait>",
+        "exit<return>",
+        "<wait><return>"
+      ],
+      "boot_wait": "2m",
+      "communicator": "winrm",
+      "configuration_version": "8.0",
+      "cpus": "2",
+      "disk_size": "{{user `disk_size`}}",
+      "floppy_files": [
+        "{{user `autounattend`}}",
+        "./floppy/WindowsPowershell.lnk",
+        "./floppy/PinTo10.exe",
+        "./scripts/fixnetwork.ps1",
+        "./scripts/disable-screensaver.ps1",
+        "./scripts/disable-winrm.ps1",
+        "./scripts/enable-winrm.ps1",
+        "./scripts/microsoft-updates.bat",
+        "./scripts/win-updates.ps1"
+      ],
+      "guest_additions_mode": "none",
+      "iso_checksum": "{{user `iso_checksum`}}",
+      "iso_url": "{{user `iso_url`}}",
+      "memory": "{{user `memory`}}",
+      "shutdown_command": "shutdown /s /t 10 /f /d p:4:1 /c \"Packer Shutdown\"",
+      "switch_name": "{{user `switch_name`}}",
+      "type": "hyperv-iso",
+      "vm_name": "{{user `vm_name`}}",
+      "winrm_password": "vagrant",
+      "winrm_timeout": "{{user `winrm_timeout`}}",
+      "winrm_username": "vagrant"
+    },
+    {
+      "boot_command": [
+        "<leftShiftOn><f10><leftShiftOff><wait>",
+        "reg add HKLM\\SYSTEM\\Setup\\LabConfig /t REG_DWORD /v BypassTPMCheck /d 1<return>",
+        "reg add HKLM\\SYSTEM\\Setup\\LabConfig /t REG_DWORD /v BypassSecureBootCheck /d 1<return><wait>",
+        "exit<return>",
+        "<wait><return>"
+      ],
+      "boot_wait": "2m",
+      "communicator": "winrm",
+      "cpus": 2,
+      "disk_adapter_type": "lsisas1068",
+      "disk_size": "{{user `disk_size`}}",
+      "disk_type_id": "{{user `disk_type_id`}}",
+      "floppy_files": [
+        "{{user `autounattend`}}",
+        "./floppy/WindowsPowershell.lnk",
+        "./floppy/PinTo10.exe",
+        "./scripts/fixnetwork.ps1",
+        "./scripts/disable-screensaver.ps1",
+        "./scripts/disable-winrm.ps1",
+        "./scripts/enable-winrm.ps1",
+        "./scripts/microsoft-updates.bat",
+        "./scripts/win-updates.ps1"
+      ],
+      "guest_os_type": "windows9-64",
+      "headless": "{{user `headless`}}",
+      "iso_checksum": "{{user `iso_checksum`}}",
+      "iso_url": "{{user `iso_url`}}",
+      "memory": "{{user `memory`}}",
+      "shutdown_command": "shutdown /s /t 10 /f /d p:4:1 /c \"Packer Shutdown\"",
+      "type": "vmware-iso",
+      "version": "{{user `vmx_version`}}",
+      "vm_name": "{{user `vm_name`}}",
+      "vmx_data": {
+        "RemoteDisplay.vnc.enabled": "false",
+        "RemoteDisplay.vnc.port": "5900"
+      },
+      "vmx_remove_ethernet_interfaces": true,
+      "vnc_port_max": 5980,
+      "vnc_port_min": 5900,
+      "winrm_password": "vagrant",
+      "winrm_timeout": "{{user `winrm_timeout`}}",
+      "winrm_username": "vagrant"
+    },
+    {
+      "boot_command": [
+        "<leftShiftOn><f10><leftShiftOff><wait>",
+        "reg add HKLM\\SYSTEM\\Setup\\LabConfig /t REG_DWORD /v BypassTPMCheck /d 1<return>",
+        "reg add HKLM\\SYSTEM\\Setup\\LabConfig /t REG_DWORD /v BypassSecureBootCheck /d 1<return><wait>",
+        "exit<return>",
+        "<wait><return>"
+      ],
+      "boot_wait": "2m",
+      "communicator": "winrm",
+      "cpus": 2,
+      "disk_size": "{{user `disk_size`}}",
+      "floppy_files": [
+        "{{user `autounattend`}}",
+        "./floppy/WindowsPowershell.lnk",
+        "./floppy/PinTo10.exe",
+        "./scripts/fixnetwork.ps1",
+        "./scripts/disable-screensaver.ps1",
+        "./scripts/disable-winrm.ps1",
+        "./scripts/enable-winrm.ps1",
+        "./scripts/microsoft-updates.bat",
+        "./scripts/win-updates.ps1"
+      ],
+      "guest_additions_mode": "disable",
+      "guest_os_type": "Windows10_64",
+      "headless": "{{user `headless`}}",
+      "iso_checksum": "{{user `iso_checksum`}}",
+      "iso_url": "{{user `iso_url`}}",
+      "memory": "{{user `memory`}}",
+      "shutdown_command": "shutdown /s /t 10 /f /d p:4:1 /c \"Packer Shutdown\"",
+      "type": "virtualbox-iso",
+      "vm_name": "{{user `vm_name`}}",
+      "winrm_password": "vagrant",
+      "winrm_timeout": "{{user `winrm_timeout`}}",
+      "winrm_username": "vagrant"
+    },
+    {
+      "boot_command": [
+        "<leftShiftOn><f10><leftShiftOff><wait>",
+        "reg add HKLM\\SYSTEM\\Setup\\LabConfig /t REG_DWORD /v BypassTPMCheck /d 1<return>",
+        "reg add HKLM\\SYSTEM\\Setup\\LabConfig /t REG_DWORD /v BypassSecureBootCheck /d 1<return><wait>",
+        "exit<return>",
+        "<wait><return>"
+      ],
+      "boot_wait": "2m",
+      "communicator": "winrm",
+      "cpus": 2,
+      "disk_size": "{{user `disk_size`}}",
+      "floppy_files": [
+        "{{user `autounattend`}}",
+        "./floppy/WindowsPowershell.lnk",
+        "./floppy/PinTo10.exe",
+        "./scripts/fixnetwork.ps1",
+        "./scripts/disable-screensaver.ps1",
+        "./scripts/disable-winrm.ps1",
+        "./scripts/enable-winrm.ps1",
+        "./scripts/microsoft-updates.bat",
+        "./scripts/win-updates.ps1"
+      ],
+      "guest_os_type": "win-10",
+      "iso_checksum": "{{user `iso_checksum`}}",
+      "iso_url": "{{user `iso_url`}}",
+      "memory": "{{user `memory`}}",
+      "shutdown_command": "shutdown /s /t 10 /f /d p:4:1 /c \"Packer Shutdown\"",
+      "type": "parallels-iso",
+      "parallels_tools_flavor": "win",
+      "parallels_tools_mode": "disable",
+      "prlctl": [
+        [
+          "set",
+          "{{.Name}}",
+          "--adaptive-hypervisor",
+          "on"
+        ],
+        [
+          "set",
+          "{{.Name}}",
+          "--efi-boot",
+          "off"
+        ]
+      ],
+      "vm_name": "{{user `vm_name`}}",
+      "winrm_password": "vagrant",
+      "winrm_timeout": "{{user `winrm_timeout`}}",
+      "winrm_username": "vagrant"
+    }
+  ],
+  "post-processors": [
+    {
+      "keep_input_artifact": false,
+      "output": "windows_11_{{.Provider}}.box",
+      "type": "vagrant",
+      "vagrantfile_template": "vagrantfile-windows_10.template"
+    }
+  ],
+  "provisioners": [
+    {
+      "execute_command": "{{ .Vars }} cmd /c \"{{ .Path }}\"",
+      "remote_path": "/tmp/script.bat",
+      "scripts": [
+        "./scripts/enable-rdp.bat"
+      ],
+      "type": "windows-shell"
+    },
+    {
+      "scripts": [
+        "./scripts/vm-guest-tools.ps1",
+        "./scripts/debloat-windows.ps1"
+      ],
+      "type": "powershell"
+    },
+    {
+      "restart_timeout": "{{user `restart_timeout`}}",
+      "type": "windows-restart"
+    },
+    {
+      "scripts": [
+        "./scripts/set-powerplan.ps1",
+        "./scripts/docker/disable-windows-defender.ps1"
+      ],
+      "type": "powershell"
+    },
+    {
+      "execute_command": "{{ .Vars }} cmd /c \"{{ .Path }}\"",
+      "remote_path": "/tmp/script.bat",
+      "scripts": [
+        "./scripts/chocolatey.bat"
+      ],
+      "type": "windows-shell"
+    },
+    {
+      "scripts": [
+        "./scripts/chocopacks.ps1"
+      ],
+      "type": "powershell"
+    },
+    {
+      "execute_command": "{{ .Vars }} cmd /c \"{{ .Path }}\"",
+      "remote_path": "/tmp/script.bat",
+      "scripts": [
+        "./scripts/pin-powershell.bat",
+        "./scripts/compile-dotnet-assemblies.bat",
+        "./scripts/set-winrm-automatic.bat",
+        "./scripts/uac-enable.bat",
+        "./scripts/dis-updates.bat",
+        "./scripts/compact.bat"
+      ],
+      "type": "windows-shell"
+    }
+  ],
+  "variables": {
+    "autounattend": "./answer_files/11/Autounattend.xml",
+    "disk_size": "61440",
+    "disk_type_id": "1",
+    "memory": "4096",
+    "headless": "false",
+    "iso_checksum": "sha256:e8b1d2a1a85a09b4bf6154084a8be8e3c814894a15a7bcf3e8e63fcfa9a528cb",
+    "iso_url": "https://software-download.microsoft.com/download/sg/22000.194.210913-1444.co_release_svc_refresh_CLIENTENTERPRISEEVAL_OEMRET_x64FRE_en-us.iso",
+    "restart_timeout": "5m",
+    "vhv_enable": "false",
+    "virtio_win_iso": "~/virtio-win.iso",
+    "vm_name": "windows_11",
+    "winrm_timeout": "6h",
+    "vmx_version": "14"
+  }
+}

scripts/update.ps1

@@ -5,17 +5,17 @@
     This script updates dependencies to the latest version in vendor/sources.json file.
 
     You will need to make this script executable by setting your Powershell Execution Policy to Remote signed
-    Then unblock the script for execution with UnblockFile .\update.ps1
+    Then unblock the script for execution with UnblockFile .\build.ps1
 .EXAMPLE
-    .\update.ps1
+    .\build.ps1
 
     Updates the dependency sources in the default location, the vendor/sources.json file.
 .EXAMPLE
-    .\update.ps1 -verbose
+    .\build -verbose
 
     Updates the dependency sources and see what's going on.
 .EXAMPLE
-    .\update.ps1 -SourcesPath '~/custom/vendors.json'
+    .\build.ps1 -SourcesPath '~/custom/vendors.json'
 
     Specify the path to update dependency sources file at.
 .NOTES
@@ -23,7 +23,7 @@
     David Refoua <David@Refoua.me>
     Part of the Cmder project.
 .LINK
-    https://github.com/cmderdev/cmder - Project Home
+    http://cmder.app/ - Project Home
 #>
 [CmdletBinding(SupportsShouldProcess = $true)]
 Param(

scripts/utils.ps1

@@ -1,6 +1,7 @@
 function Ensure-Exists($path) {
     if (-not (Test-Path $path)) {
-        throw "Missing required $path! Ensure it is installed"
+        Write-Error "Missing required $path! Ensure it is installed"
+        exit 1
     }
     return $true > $null
 }
@@ -15,7 +16,8 @@ function Ensure-Executable($command) {
             Set-Alias -Name "7z" -Value "$env:programw6432\7-zip\7z.exe" -Scope script
         }
         else {
-            throw "Missing $command! Ensure it is installed and on in the PATH"
+            Write-Error "Missing $command! Ensure it is installed and on in the PATH"
+            exit 1
         }
     }
 }

scripts/vagrant/add-cmder.ps1

@@ -0,0 +1,44 @@
+choco install -y --force 7zip 7zip.install
+choco install -y --force cmder
+
+$env:path = "$env:path;c:\tools\cmder\vendor\git-for-windows\cmd;c:\tools\cmder\vendor\git-for-windows\usr\bin;c:\tools\cmder\vendor\git-for-windows\mingw64\bin"
+c:
+cd $env:userprofile
+git clone https://github.com/cmderdev/cmder cmderdev 2>&1
+
+if ("$env:USERNAME" -eq "vagrant" -and -not (test-path "$env:userprofile\cmderdev\vendor\git-for-windows")) {
+  invoke-expression -command "TAKEOWN /F `"$env:userprofile\cmderdev`" /R /D y /s localhost /u vagrant /p vagrant"
+}
+
+cd  $env:userprofile/cmderdev
+git remote add upstream  https://github.com/cmderdev/cmder
+
+Install-PackageProvider -Name NuGet -Force
+install-module posh-git -force
+
+cmd.exe /c "call `"C:\Program Files\Microsoft Visual Studio\2022\Community\VC\Auxiliary\Build\vcvars64.bat`" && set > %temp%\vcvars.txt"
+Get-Content "$env:temp\vcvars.txt" | Foreach-Object {
+  if ($_ -match "^(.*?)=(.*)$") {
+    Set-Content "env:\$($matches[1])" $matches[2]
+  }
+}
+
+copy-item -erroraction silentlycontinue "C:\Tools\Cmder\Cmder.exe" "$env:userprofile\cmderdev"
+remove-item -erroraction silentlycontinue "$env:userprofile\cmderdev\launcher\x64\release\cmder.exe" -force
+
+start-process -erroraction silentlycontinue -nonewwindow -workingdirectory "$env:userprofile\cmderdev\scripts" -filepath "powershell.exe" -argumentlist ".\build.ps1 -verbose -compile"
+
+copy-item -erroraction silentlycontinue "$env:userprofile\cmderdev\launcher\x64\release\cmder.exe" "$env:userprofile\cmderdev" -force
+
+# tabby
+setx cmder_root "${env:userprofile}\cmderdev"
+
+# C:\Users\vagrant\AppData\Roaming\Hyper
+#         // shell: '',
+#         shell: 'cmd.exe',
+#         // for setting shell arguments (i.e. for using interactive shellArgs: `['-i']`)
+#         // by default `['--login']` will be used
+#         // shellArgs: ['--login'],
+#         shellArgs: ['/k', 'C:\\users\\vagrant\\cmderdev\\vendor\\init.bat'],
+
+

scripts/vagrant/windows_terminal_settings.json.default

@@ -0,0 +1,283 @@
+{
+    "$help": "https://aka.ms/terminal-documentation",
+    "$schema": "https://aka.ms/terminal-profiles-schema",
+    "actions": 
+    [
+        {
+            "command": 
+            {
+                "action": "copy",
+                "singleLine": false
+            },
+            "keys": "ctrl+c"
+        },
+        {
+            "command": "paste",
+            "keys": "ctrl+v"
+        },
+        {
+            "command": "find",
+            "keys": "ctrl+shift+f"
+        },
+        {
+            "command": 
+            {
+                "action": "splitPane",
+                "split": "auto",
+                "splitMode": "duplicate"
+            },
+            "keys": "alt+shift+d"
+        }
+    ],
+    "copyFormatting": "none",
+    "copyOnSelect": false,
+    "defaultProfile": "{61c54bbd-c2c6-5271-96e7-009a87ff44bf}",
+    "profiles": 
+    {
+        "defaults": {},
+        "list": 
+        [
+            {
+                "commandline": "%SystemRoot%\\System32\\WindowsPowerShell\\v1.0\\powershell.exe",
+                "guid": "{61c54bbd-c2c6-5271-96e7-009a87ff44bf}",
+                "hidden": false,
+                "name": "Windows PowerShell"
+            },
+            {
+                "commandline": "%SystemRoot%\\System32\\cmd.exe",
+                "guid": "{0caa0dad-35be-5f56-a8ff-afceeeaa6101}",
+                "hidden": false,
+                "name": "Command Prompt"
+            },
+            {
+                "guid": "{b453ae62-4e3d-5e58-b989-0a998ec441b8}",
+                "hidden": false,
+                "name": "Azure Cloud Shell",
+                "source": "Windows.Terminal.Azure"
+            },
+            {
+                "guid": "{3b26d644-1d3b-5a0c-ab09-39d4dd9ae00e}",
+                "hidden": false,
+                "name": "Developer Command Prompt for VS 2022",
+                "source": "Windows.Terminal.VisualStudio"
+            },
+            {
+                "guid": "{589cd367-e65f-5e6a-a1c7-2b8d6f250da8}",
+                "hidden": false,
+                "name": "Developer PowerShell for VS 2022",
+                "source": "Windows.Terminal.VisualStudio"
+            }
+        ]
+    },
+    "schemes": 
+    [
+        {
+            "background": "#0C0C0C",
+            "black": "#0C0C0C",
+            "blue": "#0037DA",
+            "brightBlack": "#767676",
+            "brightBlue": "#3B78FF",
+            "brightCyan": "#61D6D6",
+            "brightGreen": "#16C60C",
+            "brightPurple": "#B4009E",
+            "brightRed": "#E74856",
+            "brightWhite": "#F2F2F2",
+            "brightYellow": "#F9F1A5",
+            "cursorColor": "#FFFFFF",
+            "cyan": "#3A96DD",
+            "foreground": "#CCCCCC",
+            "green": "#13A10E",
+            "name": "Campbell",
+            "purple": "#881798",
+            "red": "#C50F1F",
+            "selectionBackground": "#FFFFFF",
+            "white": "#CCCCCC",
+            "yellow": "#C19C00"
+        },
+        {
+            "background": "#012456",
+            "black": "#0C0C0C",
+            "blue": "#0037DA",
+            "brightBlack": "#767676",
+            "brightBlue": "#3B78FF",
+            "brightCyan": "#61D6D6",
+            "brightGreen": "#16C60C",
+            "brightPurple": "#B4009E",
+            "brightRed": "#E74856",
+            "brightWhite": "#F2F2F2",
+            "brightYellow": "#F9F1A5",
+            "cursorColor": "#FFFFFF",
+            "cyan": "#3A96DD",
+            "foreground": "#CCCCCC",
+            "green": "#13A10E",
+            "name": "Campbell Powershell",
+            "purple": "#881798",
+            "red": "#C50F1F",
+            "selectionBackground": "#FFFFFF",
+            "white": "#CCCCCC",
+            "yellow": "#C19C00"
+        },
+        {
+            "background": "#282C34",
+            "black": "#282C34",
+            "blue": "#61AFEF",
+            "brightBlack": "#5A6374",
+            "brightBlue": "#61AFEF",
+            "brightCyan": "#56B6C2",
+            "brightGreen": "#98C379",
+            "brightPurple": "#C678DD",
+            "brightRed": "#E06C75",
+            "brightWhite": "#DCDFE4",
+            "brightYellow": "#E5C07B",
+            "cursorColor": "#FFFFFF",
+            "cyan": "#56B6C2",
+            "foreground": "#DCDFE4",
+            "green": "#98C379",
+            "name": "One Half Dark",
+            "purple": "#C678DD",
+            "red": "#E06C75",
+            "selectionBackground": "#FFFFFF",
+            "white": "#DCDFE4",
+            "yellow": "#E5C07B"
+        },
+        {
+            "background": "#FAFAFA",
+            "black": "#383A42",
+            "blue": "#0184BC",
+            "brightBlack": "#4F525D",
+            "brightBlue": "#61AFEF",
+            "brightCyan": "#56B5C1",
+            "brightGreen": "#98C379",
+            "brightPurple": "#C577DD",
+            "brightRed": "#DF6C75",
+            "brightWhite": "#FFFFFF",
+            "brightYellow": "#E4C07A",
+            "cursorColor": "#4F525D",
+            "cyan": "#0997B3",
+            "foreground": "#383A42",
+            "green": "#50A14F",
+            "name": "One Half Light",
+            "purple": "#A626A4",
+            "red": "#E45649",
+            "selectionBackground": "#FFFFFF",
+            "white": "#FAFAFA",
+            "yellow": "#C18301"
+        },
+        {
+            "background": "#002B36",
+            "black": "#002B36",
+            "blue": "#268BD2",
+            "brightBlack": "#073642",
+            "brightBlue": "#839496",
+            "brightCyan": "#93A1A1",
+            "brightGreen": "#586E75",
+            "brightPurple": "#6C71C4",
+            "brightRed": "#CB4B16",
+            "brightWhite": "#FDF6E3",
+            "brightYellow": "#657B83",
+            "cursorColor": "#FFFFFF",
+            "cyan": "#2AA198",
+            "foreground": "#839496",
+            "green": "#859900",
+            "name": "Solarized Dark",
+            "purple": "#D33682",
+            "red": "#DC322F",
+            "selectionBackground": "#FFFFFF",
+            "white": "#EEE8D5",
+            "yellow": "#B58900"
+        },
+        {
+            "background": "#FDF6E3",
+            "black": "#002B36",
+            "blue": "#268BD2",
+            "brightBlack": "#073642",
+            "brightBlue": "#839496",
+            "brightCyan": "#93A1A1",
+            "brightGreen": "#586E75",
+            "brightPurple": "#6C71C4",
+            "brightRed": "#CB4B16",
+            "brightWhite": "#FDF6E3",
+            "brightYellow": "#657B83",
+            "cursorColor": "#002B36",
+            "cyan": "#2AA198",
+            "foreground": "#657B83",
+            "green": "#859900",
+            "name": "Solarized Light",
+            "purple": "#D33682",
+            "red": "#DC322F",
+            "selectionBackground": "#FFFFFF",
+            "white": "#EEE8D5",
+            "yellow": "#B58900"
+        },
+        {
+            "background": "#000000",
+            "black": "#000000",
+            "blue": "#3465A4",
+            "brightBlack": "#555753",
+            "brightBlue": "#729FCF",
+            "brightCyan": "#34E2E2",
+            "brightGreen": "#8AE234",
+            "brightPurple": "#AD7FA8",
+            "brightRed": "#EF2929",
+            "brightWhite": "#EEEEEC",
+            "brightYellow": "#FCE94F",
+            "cursorColor": "#FFFFFF",
+            "cyan": "#06989A",
+            "foreground": "#D3D7CF",
+            "green": "#4E9A06",
+            "name": "Tango Dark",
+            "purple": "#75507B",
+            "red": "#CC0000",
+            "selectionBackground": "#FFFFFF",
+            "white": "#D3D7CF",
+            "yellow": "#C4A000"
+        },
+        {
+            "background": "#FFFFFF",
+            "black": "#000000",
+            "blue": "#3465A4",
+            "brightBlack": "#555753",
+            "brightBlue": "#729FCF",
+            "brightCyan": "#34E2E2",
+            "brightGreen": "#8AE234",
+            "brightPurple": "#AD7FA8",
+            "brightRed": "#EF2929",
+            "brightWhite": "#EEEEEC",
+            "brightYellow": "#FCE94F",
+            "cursorColor": "#000000",
+            "cyan": "#06989A",
+            "foreground": "#555753",
+            "green": "#4E9A06",
+            "name": "Tango Light",
+            "purple": "#75507B",
+            "red": "#CC0000",
+            "selectionBackground": "#FFFFFF",
+            "white": "#D3D7CF",
+            "yellow": "#C4A000"
+        },
+        {
+            "background": "#000000",
+            "black": "#000000",
+            "blue": "#000080",
+            "brightBlack": "#808080",
+            "brightBlue": "#0000FF",
+            "brightCyan": "#00FFFF",
+            "brightGreen": "#00FF00",
+            "brightPurple": "#FF00FF",
+            "brightRed": "#FF0000",
+            "brightWhite": "#FFFFFF",
+            "brightYellow": "#FFFF00",
+            "cursorColor": "#FFFFFF",
+            "cyan": "#008080",
+            "foreground": "#C0C0C0",
+            "green": "#008000",
+            "name": "Vintage",
+            "purple": "#800080",
+            "red": "#800000",
+            "selectionBackground": "#FFFFFF",
+            "white": "#C0C0C0",
+            "yellow": "#808000"
+        }
+    ],
+    "themes": []
+}

scripts/vagrant/windows_terminal_state.json.default

@@ -0,0 +1,9 @@
+{
+	"generatedProfiles" : 
+	[
+		"{b453ae62-4e3d-5e58-b989-0a998ec441b8}",
+		"{589cd367-e65f-5e6a-a1c7-2b8d6f250da8}",
+		"{3b26d644-1d3b-5a0c-ab09-39d4dd9ae00e}"
+	],
+	"settingsHash" : "6e0f2330b78337f3-01d95614596b3f65"
+}

vendor/bin/add-cmderrootenvar.ps1

@@ -0,0 +1 @@
+setx cmder_root "${env:cmder_root}"

vendor/bin/add-cmdertodesktop.ps1

@@ -0,0 +1,36 @@
+if (test-path "c:\windows\set-shortcut.ps1") {
+  $setShortcut = "c:\windows\set-shortcut.ps1"
+}
+
+if (test-path "${env:USERPROFILE}\cmderdev") {
+  $env:cmder_root = "${env:USERPROFILE}\cmderdev"
+  write-host "Creating '${env:USERPROFILE}\Desktop\Cmderdev.lnk'..."
+
+  if (test-path "${env:USERPROFILE}\cmderdev\vendor\bin\set-shortcut.ps1") {
+    $setShortcut = "$env:cmder_root\vendor\bin\set-shortcut.ps1"
+  }
+
+  start-process -NoNewWindow -filePath "powershell.exe" -ArgumentList "-file `"${setShortcut}`" -sourceexe `"${env:cmder_root}\Cmder.exe`" -DestinationPath `"${env:USERPROFILE}\Desktop\Cmderdev.lnk`" -WorkingDirectory `"${env:cmder_root}`""
+}
+
+if (test-path "${env:USERPROFILE}\cmder") {
+  $env:cmder_root = "${env:USERPROFILE}\cmder"
+
+  if (test-path "${cmder_root}\vendor\bin\set-shortcut.ps1") {
+    $setShortcut = "$env:cmder_root\vendor\bin\set-shortcut.ps1"
+  }
+
+  write-host "Creating '${env:USERPROFILE}\Desktop\Cmder.lnk'..."
+  start-process -NoNewWindow -filePath "powershell.exe" -ArgumentList "-file `"${setShortcut}`" -sourceexe `"$env:cmder_root\Cmder.exe`" -DestinationPath `"${env:USERPROFILE}\Desktop\Cmder.lnk`" -WorkingDirectory `"${env:USERPROFILE}`""
+} elseif (test-path "C:\tools\cmder") {
+  $env:cmder_root = "C:\tools\cmder"
+
+  if (test-path "${cmder_root}\vendor\bin\set-shortcut.ps1") {
+    $setShortcut = "$env:cmder_root\vendor\bin\set-shortcut.ps1"
+  }
+
+  write-host "Creating '${env:USERPROFILE}\Desktop\Cmder.lnk'..."
+  start-process -NoNewWindow -filePath "powershell.exe" -ArgumentList "-file `"${setShortcut}`" -sourceexe `"$env:cmder_root\Cmder.exe`" -DestinationPath `"${env:USERPROFILE}\Desktop\Cmder.lnk`" -WorkingDirectory `"${env:USERPROFILE}`""
+}
+
+

vendor/bin/add-vscodeprofile.ps1

@@ -0,0 +1,39 @@
+# VSCode
+$VSCodeUserSettings = "$env:APPDATA/Code/User"
+$VSCodeSettings = "$VSCodeUserSettings/settings.json";
+$VSCodeSettingsNew = $VSCodeSettings.replace('.json', '-new.json')
+
+if (test-path $VSCodeSettings) {
+    $data = get-content -path $VSCodeSettings -ErrorAction silentlycontinue | out-string | ConvertFrom-Json
+}
+else {
+    New-Item -ItemType directory $VSCodeUserSettings -force
+    $data = @{}
+}
+
+write-host $data
+
+$data | Add-Member -force -Name 'terminal.integrated.defaultProfile.windows' -MemberType NoteProperty -Value "Cmder"
+
+if ($null -eq $data.'terminal.integrated.profiles.windows') {
+  write-host "Adding 'terminal.integrated.profiles.windows'..."
+  $data | Add-Member -force -Name 'terminal.integrated.profiles.windows' -MemberType NoteProperty -Value @{}
+} 
+
+write-host "Adding 'terminal.integrated.profiles.windows.Cmder' profile..."
+$data.'terminal.integrated.profiles.windows'.'Cmder' = @{
+  "name" = "Cmder";
+  "path" = @(
+    "`${env:windir}/Sysnative/cmd.exe";
+    "`${env:windir}/System32/cmd.exe";
+  );
+  "args" = @(
+    "/k";
+    "`${env:USERPROFILE}/cmderdev/vendor/bin/vscode_init.cmd");
+  "icon" = "terminal-cmd";
+  "color" = "terminal.ansiGreen";
+};
+
+$data | ConvertTo-Json -depth 100 | set-content $VSCodeSettings
+
+

vendor/bin/add-windowsterminalprofiles.ps1

@@ -0,0 +1,74 @@
+# Windows Terminal
+$windowsTerminalFolder = (dir "$env:userprofile/AppData/Local/Packages/Microsoft.WindowsTerminal_*").name
+$windowsTerminalPath = "$env:userprofile/AppData/Local/Packages/$windowsTerminalFolder"
+$windowsTerminalSettings = $windowsTerminalPath + '/localState/settings.json'
+$windowsTerminalSettingsNew = $windowsTerminalPath + '/localState/settings-new.json'
+
+if (test-path "$env:userprofile/Documents/windows_terminal_settings.json.default") {
+  if (test-path "$windowsTerminalPath/LocalState/settings.json") {
+    del "$env:userprofile/Documents/windows_terminal_settings.json.default"
+  } else {
+    move-item -path $env:userprofile/Documents/windows_terminal_settings.json.default -destination $windowsTerminalPath/LocalState/settings.json
+  }
+}
+
+if (test-path "$env:userprofile/Documents/windows_terminal_state.json.default") {
+  if (test-path "$windowsTerminalPath/LocalState/state.json") {
+    del "$env:userprofile/Documents/windows_terminal_state.json.default"
+  } else {
+    move-item -path $env:userprofile/Documents/windows_terminal_state.json.default -destination $windowsTerminalPath/LocalState/state.json
+  }
+}
+
+if (test-path "$windowsTerminalPath/LocalState/state.json") {
+  $json = get-content $windowsTerminalSettings | ConvertFrom-Json
+
+  $json.defaultProfile="{00000000-0000-0000-ba54-000000000132}"
+
+  $cmderFound = $false
+  $cmderAsAdminFound = $false
+
+  foreach ($profile in $json.profiles.list) {
+    if ($profile.Name -eq "Cmder") {
+      $cmderFound = $true
+    }
+    elseIf ($profile.Name -eq "Cmder as Admin") {
+      $cmderAsAdminFound = $true
+    }
+  }
+
+  if (-not $cmderFound) {
+    write-host "Adding 'Cmder' to Windows Terminal..."
+
+    $json.profiles.list += @{
+      commandline="cmd.exe /k `"%USERPROFILE%/cmderdev/vendor/init.bat`"";
+      startingDirectory="%USERPROFILE%/cmderdev";
+      icon="%USERPROFILE%/cmderdev/icons/cmder.ico";
+      closeOnExit="graceful";
+      guid="{00000000-0000-0000-ba54-000000000132}";
+      hidden=$false;
+      name="Cmder"
+    }
+  }
+
+  if (-not $cmderAsAdminFound) {
+    write-host "Adding 'Cmder as Admin' to Windows Terminal..."
+
+    $json.profiles.list += @{
+      commandline="cmd.exe /k `"%USERPROFILE%/cmderdev/vendor/init.bat`"";
+      startingDirectory="%USERPROFILE%/cmderdev";
+      icon="%USERPROFILE%/cmderdev/icons/cmder_red.ico";
+      closeOnExit="graceful";
+      guid="{00000000-0000-0000-ba54-000000000133}";
+      hidden=$false;
+      elevate=$true;
+      name="Cmder as Admin"
+    }
+  }
+
+  $json | ConvertTo-Json -depth 100 | set-content $windowsTerminalSettings
+}
+else {
+  write-host "Cannot add profiles for Windows Terminal.  The Windows Terminal settings file does not exist!"
+}
+

vendor/bin/cmder_shell.cmd

@@ -9,5 +9,5 @@ if "%cmder_init%" == "1" (
 )
 
 pushd "%CMDER_ROOT%"
-call "%CMDER_ROOT%\vendor\init.bat" /f %*
+call "%CMDER_ROOT%\vendor\init.bat" /f
 popd

vendor/bin/excd.cmd

@@ -1,8 +1,6 @@
-@echo off
+@if "%~1"=="/?" (@cd %*)
-set excd=%*
+@set excd=%*
-set excd=%excd:"=%
+@set excd=%excd:"=%
-set excd_param=/d
+@if "%excd:~0,1%"=="~" (@set excd=%userprofile%\%excd:~1%)
-if /i "%excd:~0,2%"=="/d" set "excd=%excd:~2%"
+@if not "%~1"=="/d" (@set excd_param="/d") else (@set excd_param=)
-if "%excd:~0,1%"=="~" (set excd=%userprofile%\%excd:~1%)
+@cd %excd_param% "%excd%"
-if "%excd:~0,1%"=="/" (set excd_param=)
-cd %excd_param% %excd%

vendor/bin/set-shortcut.ps1

@@ -0,0 +1,21 @@
+[CmdletBinding()]
+param(
+    [Parameter()]
+    [string]$SourceExe,
+    [string]$Arguments,
+    [string]$DestinationPath,
+    [string]$WorkingDirectory,
+    [String]$IconLocation
+)
+
+if ($IconLocation -eq '') {
+    $IconLocation = $SourceExe
+}
+
+$WshShell = New-Object -comObject WScript.Shell
+$Shortcut = $WshShell.CreateShortcut($destinationPath)
+$Shortcut.TargetPath = $SourceExe
+$Shortcut.Arguments = $Arguments
+$shortcut.WorkingDirectory = $WorkingDirectory
+$shortcut.IconLocation = $IconLocation
+$Shortcut.Save()

vendor/clink_settings.default

@@ -1,10 +1,6 @@
 # For explanation of these and other settings see:
 # https://chrisant996.github.io/clink/clink.html
 
-# name: Expand envvars when completing
-# type: boolean
-match.expand_envvars = True
-
 # name: Sets how command history expansion is applied
 # type: enum
 # options: off,on,not_squoted,not_dquoted,not_quoted

vendor/cmder_prompt_config.lua.default

@@ -48,15 +48,15 @@ prompt_overrideSvnStatusOptIn = false
 -- Colors: https://github.com/cmderdev/cmder/wiki/Customization#list-of-colors
 -- Effects: https://github.com/cmderdev/cmder/wiki/Customization#list-of-effects
 --
--- Green:      "\x1b[1;32;49m"
+-- Green:      "\x1b[1;33;49m"
--- Yellow:     "\x1b[1;33;49m"
+-- Yellow:     "\x1b[1;32;49m"
 -- Light Grey: "\x1b[1;30;49m"
 
 -- Prompt Element Colors
-uah_color = "\x1b[1;33;49m" -- Yellow uah = [user]@[hostname]
+uah_color = "\x1b[1;33;49m" -- Green = uah = [user]@[hostname]
-cwd_color = "\x1b[1;32;49m" -- Green cwd = Current Working Directory
+cwd_color = "\x1b[1;32;49m" -- Yellow cwd = Current Working Directory
 lamb_color = "\x1b[1;30;49m" -- Light Grey = Lambda Color
 clean_color = "\x1b[37;1m"
 dirty_color = "\x1b[33;3m" -- Yellow, Italic
 conflict_color = "\x1b[31;1m" -- Red, Bold
-unknown_color = "\x1b[37;1m" -- White, Bold = No VCS Status Branch Color
+unknown_color = "\x1b[37;1m" -- White = No VCS Status Branch Color

vendor/git-prompt.sh

@@ -1,35 +1,26 @@
-# Returns 1 if git status for Cmder is disabled, otherwise returns 0
 function getGitStatusSetting() {
-  local gitConfig
+  gitStatusSetting=$(git --no-pager config -l 2>/dev/null)
 
-  # Get all git config entries for the current repository without pager
+  if [[ -n ${gitStatusSetting} ]] && [[ ${gitStatusSetting} =~ cmder.status=false ]] || [[ ${gitStatusSetting} =~ cmder.shstatus=false ]]
-  gitConfig=$(git --no-pager config -l 2>/dev/null) || return 0  # treat failure as enabled
-
-  # Check if git status for Cmder is disabled
-  if [[ $gitConfig =~ (^|$'\n')cmder\.status=false($|$'\n') ]] || \
-     [[ $gitConfig =~ (^|$'\n')cmder\.shstatus=false($|$'\n') ]]
   then
-    return 1  # disabled
+    echo false
+  else
+    echo true
   fi
-
-  return 0
 }
 
-# Prints current branch or detached HEAD short commit hash
 function getSimpleGitBranch() {
-  local gitDir
+  gitDir=$(git rev-parse --git-dir 2>/dev/null)
-  gitDir=$(git rev-parse --git-dir 2>/dev/null) || return 0
+  if [ -z "$gitDir" ]; then
+    return 0
+  fi
 
-  local headFile="$gitDir/HEAD"
+  headContent=$(< "$gitDir/HEAD")
-  [ -f "$headFile" ] || return 0
+  if [[ "$headContent" == "ref: refs/heads/"* ]]
-
-  local headContent
-  headContent=$(< "$headFile")
-  if [[ "$headContent" =~ ^ref:\ refs/heads/(.+)$ ]]
   then
-    echo " (${BASH_REMATCH[1]})"
+    echo " (${headContent:16})"
   else
-    echo " (HEAD detached at ${headContent:0:7})"
+  echo " (HEAD detached at ${headContent:0:7})"
   fi
 }
 
@@ -42,18 +33,18 @@ fi
 
 if test -f ~/.config/git/git-prompt.sh
 then
-  if getGitStatusSetting
+  if [[ $(getGitStatusSetting) == true ]]
   then
     . ~/.config/git/git-prompt.sh
   fi
 else
-  # Taken parts from https://github.com/git-for-windows/build-extra/blob/main/git-extra/git-prompt.sh
+  PS1='\[\033]0;$MSYSTEM:${PWD//[^[:ascii:]]/?}\007\]' # set window title
-  PS1='\[\033]0;${TITLEPREFIX:+$TITLEPREFIX:}${PWD//[^[:ascii:]]/?}\007\]' # set window title to TITLEPREFIX (if set) and current working directory
+  # PS1="$PS1"'\n'                 # new line
-  # PS1="$PS1"'\n'               # new line (disabled)
+  PS1="$PS1"'\[\033[32m\]'       # change to green
-  PS1="$PS1"'\[\033[32m\]'       # change to green and bold
   PS1="$PS1"'\u@\h '             # user@host<space>
-  PS1="$PS1${MSYSTEM:+\[\033[35m\]$MSYSTEM }" # show MSYSTEM in purple (if set)
+  # PS1="$PS1"'\[\033[35m\]'       # change to purple
-  PS1="$PS1"'\[\033[1;33m\]'     # change to dark yellow in bold
+  # PS1="$PS1"'$MSYSTEM '          # show MSYSTEM
+  PS1="$PS1"'\[\033[33m\]'       # change to brownish yellow
   PS1="$PS1"'\w'                 # current working directory
   if test -z "$WINELOADERNOEXEC"
   then
@@ -64,7 +55,7 @@ else
     if test -f "$COMPLETION_PATH/git-prompt.sh"
     then
       . "$COMPLETION_PATH/git-completion.bash"
-      if getGitStatusSetting
+      if [[ $(getGitStatusSetting) == true ]]
       then
         . "$COMPLETION_PATH/git-prompt.sh"
         PS1="$PS1"'\[\033[36m\]'  # change color to cyan
@@ -75,22 +66,9 @@ else
       fi
     fi
   fi
-  PS1="$PS1"'\[\033[0m\]'        # reset color
+  PS1="$PS1"'\[\033[0m\]'        # change color
   PS1="$PS1"'\n'                 # new line
-  PS1="$PS1"'\[\033[30;1m\]'     # change color to grey in bold
+  PS1="$PS1"'λ '                 # prompt: always λ
-  PS1="$PS1"'λ '                 # prompt: Cmder uses λ
-  PS1="$PS1"'\[\033[0m\]'        # reset color
 fi
 
-MSYS2_PS1="$PS1"               # for detection by MSYS2 SDK's bash.basrc
+MSYS2_PS1="$PS1"               # for detection by MSYS2 SDK's bash.basrc
-
-# Evaluate all user-specific Bash completion scripts (if any)
-if test -z "$WINELOADERNOEXEC"
-then
-  for c in "$HOME"/bash_completion.d/*.bash
-  do
-    # Handle absence of any scripts (or the folder) gracefully
-    test ! -f "$c" ||
-    . "$c"
-  done
-fi

vendor/init.bat

@@ -426,7 +426,7 @@ if "%CMDER_ALIASES%" == "1" (
 )
 
 :: Add aliases to the environment
-type "%user_aliases%" | %WINDIR%\System32\findstr /b /l /i "history=cat " >nul
+type "%user_aliases%" | findstr /b /l /i "history=cat " >nul
 if "%ERRORLEVEL%" == "0" (
     echo Migrating alias 'history' to new Clink 1.x.x...
     call "%CMDER_ROOT%\vendor\bin\alias.cmd" /d history

vendor/lib/lib_base.cmd

@@ -10,8 +10,9 @@ if "%~1" == "/h" (
 
 exit /b
 
+:help
 :::===============================================================================
-:::help - shows all sub routines in a .bat/.cmd file with documentation
+:::show_subs - shows all sub routines in a .bat/.cmd file with documentation
 :::.
 :::include:
 :::.
@@ -19,15 +20,16 @@ exit /b
 :::.
 :::usage:
 :::.
-:::       %lib_base% help "file"
+:::       %lib_base% show_subs "file"
 :::.
 :::options:
 :::.
 :::       file <in> full path to file containing lib_routines to display
+:::.
 :::-------------------------------------------------------------------------------
+    for /f "tokens=* delims=:" %%a in ('type "%~1" ^| %WINDIR%\System32\findstr /i /r "^:::"') do (
+        rem echo a="%%a"
 
-:help
-    for /f "tokens=* delims=:" %%a in ('%WINDIR%\System32\findstr /i /r "^:::" "%~1"') do (
         if "%%a"=="." (
             echo.
         ) else if /i "%%a" == "usage" (
@@ -42,13 +44,9 @@ exit /b
     pause
     exit /b
 
+:cmder_shell
 :::===============================================================================
-:::cmder_shell - Initializes the Cmder shell environment variables
+:::show_subs - shows all sub routines in a .bat/.cmd file with documentation
-:::.
-:::description:
-:::.
-:::       This routine sets up the Cmder shell environment by detecting the
-:::       command shell and initializing related variables.
 :::.
 :::include:
 :::.
@@ -57,30 +55,15 @@ exit /b
 :::usage:
 :::.
 :::       %lib_base% cmder_shell
+:::.
+:::options:
+:::.
+:::       file <in> full path to file containing lib_routines to display
+:::.
 :::-------------------------------------------------------------------------------
-
-:cmder_shell
     call :detect_comspec %ComSpec%
     exit /b
 
-:::===============================================================================
-:::detect_comspec - Detects the command shell being used:::
-:::.
-:::description:
-:::.
-:::       This function sets the CMDER_SHELL variable to the name of the
-:::       detected command shell. It also initializes the CMDER_CLINK and
-:::       CMDER_ALIASES variables if they are not already defined.
-:::.
-:::include:
-:::.
-:::       call "lib_base.cmd"
-:::.
-:::usage:
-:::.
-:::       %lib_base% detect_comspec %ComSpec%
-:::-------------------------------------------------------------------------------
-
 :detect_comspec
     set CMDER_SHELL=%~n1
     if not defined CMDER_CLINK (
@@ -91,27 +74,6 @@ exit /b
     )
     exit /b
 
-:::===============================================================================
-:::update_legacy_aliases - Updates the legacy alias definitions in the user_aliases file
-:::.
-:::description:
-:::.
-:::       This function checks if the user_aliases file contains the marker
-:::       ";= Add aliases below here". If the marker is not found, it creates
-:::       an initial user_aliases store by copying the default user_aliases file
-:::       from the CMDER_ROOT directory. If the CMDER_USER_CONFIG environment
-:::       variable is defined, it creates a backup of the existing user_aliases
-:::       file before copying the default file.
-:::.
-:::include:
-:::.
-:::       call "lib_base.cmd"
-:::.
-:::usage:
-:::.
-:::       %lib_base% update_legacy_aliases
-:::-------------------------------------------------------------------------------
-
 :update_legacy_aliases
     type "%user_aliases%" | %WINDIR%\System32\findstr /i ";= Add aliases below here" >nul
     if "%errorlevel%" == "1" (

vendor/lib/lib_git.cmd

@@ -12,6 +12,7 @@ if "%~1" == "/h" (
 
 exit /b
 
+:read_version
 :::===============================================================================
 :::read_version - Get the git.exe version
 :::.
@@ -33,7 +34,6 @@ exit /b
 :::  GIT_VERSION_[GIT SCOPE] <out> Env variable containing Git semantic version string
 :::-------------------------------------------------------------------------------
 
-:read_version
     :: clear the variables
     set GIT_VERSION_%~1=
 
@@ -55,7 +55,6 @@ exit /b
             set "GIT_VERSION=%%C"
         ) else (
             echo "'git --version' returned an improper version string!"
-            %print_debug% :read_version "returned string: '%%A %%B %%C' by executable path: %git_executable%"
             pause
             exit /b
         )
@@ -64,6 +63,7 @@ exit /b
 
     exit /b
 
+:parse_version
 :::===============================================================================
 :::parse_version - Parse semantic version string 'x.x.x.x' and return the pieces
 :::.
@@ -88,7 +88,6 @@ exit /b
 :::  [SCOPE]_BUILD <out> Scoped Build version.
 :::-------------------------------------------------------------------------------
 
-:parse_version
     :: process a `x.x.x.xxxx.x` formatted string
     %print_debug% :parse_version "ARGV[1]=%~1, ARGV[2]=%~2"
 
@@ -111,8 +110,9 @@ exit /b
 
 :endlocal_set_git_version
 
+:validate_version
 :::===============================================================================
-:::validate_version - Validate semantic version string 'x.x.x.x'
+:::validate_version - Validate semantic version string 'x.x.x.x'.
 :::.
 :::include:
 :::.
@@ -128,7 +128,6 @@ exit /b
 :::  [VERSION]   <in> Semantic version String. Ex: 1.2.3.4
 :::-------------------------------------------------------------------------------
 
-:validate_version
     :: now parse the version information into the corresponding variables
     %print_debug% :validate_version "ARGV[1]=%~1, ARGV[2]=%~2"
 
@@ -143,8 +142,9 @@ exit /b
     )
     exit /b
 
+:compare_versions
 :::===============================================================================
-:::compare_version - Compare semantic versions and return latest version
+:::compare_version - Compare semantic versions return latest version.
 :::.
 :::include:
 :::.
@@ -160,7 +160,6 @@ exit /b
 :::  [SCOPE2]    <in> Example: VENDOR
 :::-------------------------------------------------------------------------------
 
-:compare_versions
     :: checks all major, minor, patch and build variables for the given arguments.
     :: whichever binary that has the most recent version will be used based on the return code.
 
@@ -185,12 +184,7 @@ exit /b
     endlocal & exit /b 0
 
 :::===============================================================================
-:::is_git_shim - Check if the directory has a git.shim file
+:::is_git_shim
-:::.
-:::description:
-:::.
-:::  Shim is a small helper program for Scoop that calls the executable configured in git.shim file
-:::  See: github.com/ScoopInstaller/Shim and github.com/cmderdev/cmder/pull/1905
 :::.
 :::include:
 :::.
@@ -207,7 +201,7 @@ exit /b
 
 :is_git_shim
     pushd "%~1"
-    :: check if there is a shim file - if yes, read the actual executable path
+    :: check if there's shim - and if yes follow the path
     setlocal enabledelayedexpansion
     if exist git.shim (
         for /F "tokens=2 delims== " %%I in (git.shim) do (
@@ -224,7 +218,7 @@ exit /b
     exit /b
 
 :::===============================================================================
-:::compare_git_versions - Compare the user git version against the vendored version
+:::compare_git_versions
 :::.
 :::include:
 :::.
@@ -258,7 +252,7 @@ exit /b
         :: if the user provided git executable is not found
         IF ERRORLEVEL -255 IF NOT ERRORLEVEL -254 (
         :: if not exist "%git_executable%" (
-            %print_debug% ":compare_git_versions" "No git at '%git_executable%' found."
+            %print_debug% ":compare_git_versions" "No git at "%git_executable%" found."
             set test_dir=
         )
     )
@@ -267,7 +261,7 @@ exit /b
     exit /b
 
 :::===============================================================================
-:::get_user_git_version - Get the version information for the user provided git binary
+:::get_user_git_version - get the version information for the user provided git binary
 :::.
 :::include:
 :::.
@@ -283,4 +277,5 @@ exit /b
     %lib_git% read_version USER "%test_dir%" 2>nul
     %print_debug% ":get_user_git_version" "get_user_git_version GIT_VERSION_USER: %GIT_VERSION_USER%"
     %lib_git% validate_version USER %GIT_VERSION_USER%
-    exit /b
+    exit  /b
+

vendor/lib/lib_path.cmd

@@ -1,5 +1,6 @@
 @echo off
 
+
 call "%~dp0lib_base.cmd"
 call "%%~dp0lib_console"
 set lib_path=call "%~dp0lib_path.cmd"
@@ -10,13 +11,6 @@ if "%~1" == "/h" (
     call :%*
 )
 
-setlocal enabledelayedexpansion
-if not defined find_pathext (
-    set "find_pathext=!PATHEXT:;= !"
-    set "find_pathext=!find_pathext:.=\.!"
-)
-endlocal & set "find_pathext=%find_pathext%"
-
 exit /b
 
 :enhance_path
@@ -38,12 +32,13 @@ exit /b
 :::options:
 :::
 :::  append     <in> Append to the path env variable rather than pre-pend.
-:::
+::B
 :::
 :::output:
 :::
 :::  path       <out> Sets the path env variable if required.
 :::-------------------------------------------------------------------------------
+
     if "%~1" neq "" (
         set "add_path=%~1"
     ) else (
@@ -57,8 +52,7 @@ exit /b
         set "position="
     )
 
-    dir "%add_path%" 2>NUL | findstr -i -e "%find_pathext%" >NUL
+    dir "%add_path%" | findstr -i "\.COM \.EXE \.BAT \.CMD \.PS1 \.VBS" >NUL
-
     if "%ERRORLEVEL%" == "0" (
         set "add_to_path=%add_path%"
     ) else (
@@ -87,20 +81,20 @@ exit /b
         echo "!path!"|!WINDIR!\System32\findstr >nul /I /R /C:";!find_query!;"
         call :set_found
     )
-    %print_debug% :enhance_path "Env Var INSIDE PATH !find_query! - found=!found!"
+    %print_debug%  :enhance_path "Env Var INSIDE PATH !find_query! - found=!found!"
 
     if /i "!position!" == "append" (
         if "!found!" == "0" (
             echo "!path!"|!WINDIR!\System32\findstr >nul /I /R /C:";!find_query!\"$"
             call :set_found
         )
-        %print_debug% :enhance_path "Env Var END PATH !find_query! - found=!found!"
+        %print_debug%  :enhance_path "Env Var END PATH !find_query! - found=!found!"
     ) else (
         if "!found!" == "0" (
             echo "!path!"|!WINDIR!\System32\findstr >nul /I /R /C:"^\"!find_query!;"
             call :set_found
         )
-        %print_debug% :enhance_path "Env Var BEGIN PATH !find_query! - found=!found!"
+        %print_debug%  :enhance_path "Env Var BEGIN PATH !find_query! - found=!found!"
     )
     endlocal & set found=%found%
 
@@ -135,12 +129,13 @@ exit /b
         exit /b
 
     :changed
-        %print_debug% :enhance_path "END Env Var - PATH=%path%"
+        %print_debug%  :enhance_path "END Env Var - PATH=%path%"
-        %print_debug% :enhance_path "Env Var %find_query% - found=%found%"
+        %print_debug%  :enhance_path "Env Var %find_query% - found=%found%"
         exit /b
 
     exit /b
 
+
 :set_found
     if "%ERRORLEVEL%" == "0" (
         set found=1
@@ -191,7 +186,7 @@ exit /b
         set "position="
     )
 
-    dir "%add_path%" 2>NUL | findstr -i -e "%find_pathext%" >NUL
+    dir "%add_path%" 2>NUL | findstr -i "\.COM \.EXE \.BAT \.CMD \.PS1 \.VBS" >NUL
 
     if "%ERRORLEVEL%" == "0" (
         set "add_to_path=%add_path%"
@@ -210,10 +205,10 @@ exit /b
         exit /b
     )
 
-    %print_debug% :enhance_path_recursive "Env Var - add_path=%add_to_path%"
+    %print_debug%  :enhance_path_recursive "Env Var - add_path=%add_to_path%"
-    %print_debug% :enhance_path_recursive "Env Var - position=%position%"
+    %print_debug%  :enhance_path_recursive "Env Var - position=%position%"
-    %print_debug% :enhance_path_recursive "Env Var - depth=%depth%"
+    %print_debug%  :enhance_path_recursive "Env Var - depth=%depth%"
-    %print_debug% :enhance_path_recursive "Env Var - max_depth=%max_depth%"
+    %print_debug%  :enhance_path_recursive "Env Var - max_depth=%max_depth%"
 
     if %max_depth% gtr %depth% (
         if "%add_to_path%" neq "" (
@@ -228,7 +223,7 @@ exit /b
 
     exit /b
 
-:set_depth
+: set_depth
     set /a "depth=%depth%+1"
     exit /b
 
@@ -238,9 +233,10 @@ exit /b
     )
 
     for /d %%i in ("%add_path%\*") do (
-        %print_debug% :enhance_path_recursive "Env Var BEFORE - depth=%depth%"
+        %print_debug%  :enhance_path_recursive "Env Var BEFORE - depth=%depth%"
         %print_debug% :enhance_path_recursive "Found Subdirectory - '%%~fi'"
         call :enhance_path_recursive "%%~fi" %depth% %max_depth% %position%
-        %print_debug% :enhance_path_recursive "Env Var AFTER- depth=%depth%"
+        %print_debug%  :enhance_path_recursive "Env Var AFTER- depth=%depth%"
     )
     exit /b
+

vendor/lib/lib_profile.cmd

@@ -12,26 +12,26 @@ if "%~1" == "/h" (
 
 exit /b
 
+:run_profile_d
 :::===============================================================================
-:::run_profile_d - Run all scripts in the passed directory path
+:::run_profile_d - Run all scripts in the passed dir path
-:::.
+:::
 :::include:
-:::.
+:::
 :::  call "lib_profile.cmd"
-:::.
+:::
 :::usage:
-:::.
+:::
 :::  %lib_profile% "[dir_path]"
-:::.
+:::
 :::required:
-:::.
+:::
 :::  [dir_path] <in> Fully qualified directory path containing init *.cmd|*.bat.
 :::                  Example: "c:\bin"
-:::.
+:::
 :::  path       <out> Sets the path env variable if required.
 :::-------------------------------------------------------------------------------
 
-:run_profile_d
     if not exist "%~1" (
         mkdir "%~1"
     )
@@ -43,3 +43,4 @@ exit /b
     )
     popd
     exit /b
+

vendor/psmodules/Cmder.ps1

@@ -18,8 +18,7 @@ function readVersion($gitPath) {
 }
 
 function isGitShim($gitPath) {
-    # check if there is a shim file - if yes, read the actual executable path
+    # check if there's shim - and if yes follow the path
-    # See: github.com/ScoopInstaller/Shim
 
     if (Test-Path "${gitPath}\git.shim") {
         $shim = (get-content "${gitPath}\git.shim")

vendor/sources.json

@@ -1,13 +1,13 @@
 [
   {
     "name": "git-for-windows",
-    "version": "2.49.0.windows.1",
+    "version": "2.41.0.windows.3",
-    "url": "https://github.com/git-for-windows/git/releases/download/v2.49.0.windows.1/PortableGit-2.49.0-64-bit.7z.exe"
+    "url": "https://github.com/git-for-windows/git/releases/download/v2.41.0.windows.3/PortableGit-2.41.0.3-64-bit.7z.exe"
   },
   {
     "name": "clink",
-    "version": "1.7.14",
+    "version": "1.5.1",
-    "url": "https://github.com/chrisant996/clink/releases/download/v1.7.14/clink.1.7.14.843933.zip"
+    "url": "https://github.com/chrisant996/clink/releases/download/v1.5.1/clink.1.5.1.1e9e51.zip"
   },
   {
     "name": "conemu-maximus5",
@@ -16,7 +16,7 @@
   },
   {
     "name": "clink-completions",
-    "version": "0.6.2",
+    "version": "0.4.10",
-    "url": "https://github.com/vladimir-kotikov/clink-completions/archive/v0.6.2.zip"
+    "url": "https://github.com/vladimir-kotikov/clink-completions/archive/v0.4.10.zip"
   }
 ]