Merge pull request #2144 from daxgames/1.3.12

1.3.12 Release

.github/issue_template.md

@@ -2,63 +2,88 @@
 
   Thank you for reporting a bug for the Cmder project!
   ------------------------------------------------------------------
-  
+
   Please make sure you read and follow the following instructions
   carefully before reporting bugs, and/or requesting new features.
-  
+
   Make sure that you have:
-  
+
   • Searched for existing issues (including the **closed** ones)
     for the similar problems here:
+
     https://github.com/cmderdev/cmder/issues?q=is:issue
-    
-  • Read the README.md and the Wiki:
+
+  • Read both the README.md and the Wiki:
+
     - https://github.com/cmderdev/cmder/blob/master/README.md
     - https://github.com/cmderdev/cmder/wiki
-    
+
     (What you may be asking here could already be explained there!)
-    
-  • Please understand that Cmder by default uses ConEmu as the
-    underlying Terminal Emulator. If your issue is regarding
+
+  • Please understand that Cmder uses ConEmu as the default
+    underlying Terminal Emulator.  If your issue is regarding
     the **Terminal Emulator**, please visit the ConEmu issues page:
-    
+
     https://github.com/Maximus5/ConEmu/issues?q=is:issue
-    
+
     If there isn't an existing issue, you may open a new one there.
-    
-    (We don't resolve issues regarding ConEmu here, so please 
+
+    (We don't resolve issues regarding ConEmu here, so please
      make sure you open the issue in the correct place.)
 
     more info: https://conemu.github.io/en/ThirdPartyProblems.html
-     
-  • If you are asking for guides on how to integrate Cmder into
-    your favorite IDE of choice, or how to perform an specific
-    task with Cmder, make sure you visit our label section first!
+
+  • If you would like to ask for guides on how to integrate Cmder with
+    your favorite IDE of choice, or how to perform a specific task
+    with Cmder, make sure you visit our label section first.
+
     You may already have an answer under the Guides or Questions section.
 
     For a list of labels, visit:
     - https://github.com/cmderdev/cmder/labels
 
     (Be sure to also check “Closed” issues in the labels section!)
-     
-  • If the issue is regarding the other upstream technologies that
-    Cmder uses (e.g. Clink, Git, etc), please make sure that the
-    bug you are reporting only applies when they are used in
-    combination with Cmder. If the bug applies when the mentioned
-    tools are NOT used within Cmder, there's a good chance that
-    you should open the bug at the corresponding repo instead.
+
+  • If you have a request to provide auto-complete support for a new tool,
+    please post your request here:
+
+    https://github.com/vladimir-kotikov/clink-completions/issues
+
+  • If you are having an issue with any of the **upstream technologies**
+    that are used by Cmder, please make sure that the issue is reproducible
+    _only_ when used in combination with Cmder.
+
+    We may not directly address the issues related to the following tools:
+       - Clink, the default shell in Cmder
+       - ConEmu, the terminal emulator
+       - Git/MinGW, which also provide *NIX tools
+       - clink-completions, which provide autocompletion
+
+    The issues related to upstream technologies are labeled as 👆 [name].
+
+    We'll try our best to help you -- but we recommend creating an issue
+    specifically at each of the corresponding repositories for the best
+    result.
+
+    ► Try to reproduce the bug you're reporting, on a stand-alone edition
+      of each tool, without using Cmder.  If the bug applies when the
+      mentioned tools are NOT used within Cmder, there's a good chance that
+      you should open the bug at the corresponding repo instead.
+
+  • Lastly, have a look at official documentation for Cmder over
+    our website, and our wiki.
 
     Read more on about Cmder on ConEmu docs:
     https://conemu.github.io/en/cmder.html
-    
-    
-  Thank you for making sure you are opening a new valid issue!
-  
+
+
+  Thank you for making sure you are opening a new valid issue! ♥
+
 -->
 
-<!-- 
+<!--
   Some tips on how to write a better report:
-  - Put an `x` into all the boxes [ ] relevant to your issue (example: [x]).
+  - Put an `x` into all the boxes [ ] relevant to your issue (correct example: [x] -- not like this: [ x] or [x ]).
   - Use the *Preview* tab to see how your issue will actually look like, before sending it.
   - Make sure the description is worded well enough to be understood, and with as much context and examples as possible.
   - Post a screenshot or the command the triggered the problem, if applicable.
@@ -66,6 +91,7 @@
     Help us reproduce the issue by explaining what went wrong, and what did you expect to happen.
   - Please keep the ticket language to English only here.
     We can't process your issue if it's written in Russian or Chinese as we can't understand them.
+  - You can find the version of Cmder.exe and ConEmu.exe binaries using Right Click → Properties → Details menu.
   - ⚠ Read the following page to avoid posting a bad issue: https://conemu.github.io/en/BadIssue.html
 -->
 
@@ -74,5 +100,10 @@
 - [ ] Feature request (request for new functionality)
 - [ ] Question
 
-### Description of the issue 
+### Version Information
+<!-- Please write your Cmder and ConEmu version here -->
+
+<!-- If applicable, write down your Windows edition too (e.g. Windows 10 Pro 1809) -->
+
+### Description of the issue
 <!-- Provide a clear, simple description of your issue here -->

.github/stale.yml

@@ -0,0 +1,19 @@
+# Number of days of inactivity before an issue becomes stale
+daysUntilStale: 30
+# Number of days of inactivity before a stale issue is closed
+daysUntilClose: 7
+# Issues with these labels will never be considered stale
+exemptLabels:
+  - "📌 Pinned"
+# Label to use when marking an issue as stale
+staleLabel: "👀 Awaiting Response"
+# Comment to post when marking an issue as stale. Set to `false` to disable
+markComment: >
+  This issue has been automatically marked as stale because it has not had
+  any recent activity. It will be closed in a week if no further activity occurs.
+  Thank you for your contribution(s).
+# Comment to post when closing a stale issue. Set to `false` to disable
+closeComment: >
+  This issue has been automatically closed due to it not having any
+  activity since it was marked as stale.
+  Thank you for your contribution(s).

CHANGELOG.md

@@ -1,5 +1,38 @@
 # Change Log
 
+## [1.3.12](https://github.com/cmderdev/cmder/tree/v1.3.12) (2019-08-18)
+
+### Fixes
+
+* Pull Request: [#2113](https://github.com/cmderdev/cmder/pull/2113)
+  * Add `vendor\bin\vscode_init.cmd` for use with Visual Studio Code
+  * Fixes [#2118](https://github.com/cmderdev/cmder/issues/2118)
+  * Fixes [#1985](https://github.com/cmderdev/cmder/issues/1985)
+* Pull Request: [#2106](https://github.com/cmderdev/cmder/pull/2106)
+  * Portable Git requires running `post-install.bat` which deletes itself when done.  This was not happening.
+  * Resolves [#2105](https://github.com/cmderdev/cmder/issues/2105) 
+* Pull Request: [#2002](https://github.com/cmderdev/cmder/pull/2002)
+  * Updated the HG prompt code to use the '-ib' option to 'hg id' so the branch name is always available, regardless of the state of the working copy
+
+### Changes
+
+* Pull Request: [#2055](https://github.com/cmderdev/cmder/pull/2055)
+  * Upgrade git to 2.21.0
+  * Provide default settings for Clink that updates the history file in real time
+    * Turn this on in existing Cmder using `clink set history_io 1`
+  * Allow clink disable by setting CMDER_CLINK=0 before starting task
+* Pull Request: [#2068](https://github.com/cmderdev/cmder/pull/2068)
+  * Print Index in History Command Output.
+  * Sets default `history_expand_mode = 3` in initial Clink Settings.
+
+### Adds
+
+* Pull Request  : [#2096](https://github.com/cmderdev/cmder/pull/2096)
+  * Question issue: [#2094](https://github.com/cmderdev/cmder/issues/2094)
+  * New argument created to ConEmu forwarding arguments.
+    * Syntax: `/x [ConEmu extras arguments]`
+    *   e.g.: `Cmder.exe /x "-min -tsa"`
+
 ## [1.3.11](https://github.com/cmderdev/cmder/tree/v1.3.11) (2018-12-22)
 
 ### Fixes

README.md

@@ -50,6 +50,7 @@ The Cmder's user interface is also designed to be more eye pleasing, and you can
 | `/SINGLE`                 | Start Cmder in single mode.                                                              |
 | `/START [start_path]`     | Folder path to start in.                                                                 |
 | `/TASK [task_name]`       | Task to start after launch.                                                              |
+| `/X [ConEmu extras pars]` | Forwads parameters to ConEmu                                                             |
 
 ## Context Menu Integration
 
@@ -146,6 +147,7 @@ You may find some Monokai color schemes for mintty to match Cmder [here](https:/
 | `/c [user cmder root]`          | Enables user bin and config folders for 'Cmder as admin' sessions due to non-shared environment.                                                   | not set                                |
 | `/d`                            | Enables debug output.                                                                                                                              | not set                                |
 | `/f`                            | Enables Cmder Fast Init Mode. This disables some features, see pull request [#1492](https://github.com/cmderdev/cmder/pull/1942) for more details. | not set                                |
+| `/t`                            | Enables Cmder Timed Init Mode. This displays the time taken run init scripts | not set                                |
 | `/git_install_root [file path]` | User specified Git installation root path.                                                                                                         | `%CMDER_ROOT%\vendor\Git-for-Windows`  |
 | `/home [home folder]`           | User specified folder path to set `%HOME%` environment variable.                                                                                   | `%userprofile%`                        |
 | `/max_depth [1-5]`              | Define max recurse depth when adding to the path for `%cmder_root%\bin` and `%cmder_user_bin%`                                                     | 1                                      |
@@ -312,11 +314,11 @@ For instructions on how to integrate Cmder with your IDE, please read our [Wiki
 
 The process of upgrading Cmder depends on the version/build you are currently running.
 
-If you have a `[cmder_root]/config/user-conemu.xml`, you are running a newer version of Cmder, follow the below process:
+If you have a `[cmder_root]/config/user[-|_]conemu.xml`, you are running a newer version of Cmder, follow the below process:
 
-1. Exit all Cmder sessions and relaunch `[cmder_root]/cmder.exe`, this backs up your existing `[cmder_root]/vendor/conemu-maximus5/conemu.xml` to `[cmder_root]/config/user-conemu.xml`.
+1. Exit all Cmder sessions and relaunch `[cmder_root]/cmder.exe`, this backs up your existing `[cmder_root]/vendor/conemu-maximus5/conemu.xml` to `[cmder_root]/config/user[-|_]conemu.xml`.
 
-   * The `[cmder_root]/config/user-conemu.xml` contains any custom settings you have made using the 'Setup Tasks' settings dialog.
+   * The `[cmder_root]/config/user[-|_]conemu.xml` contains any custom settings you have made using the 'Setup Tasks' settings dialog.
 
 2. Exit all Cmder sessions and backup any files you have manually edited under `[cmder_root]/vendor`.
 
@@ -325,9 +327,9 @@ If you have a `[cmder_root]/config/user-conemu.xml`, you are running a newer ver
 3.  Delete the `[cmder_root]/vendor` folder.
 4.  Extract the new `cmder.zip` or `cmder_mini.zip` into `[cmder_root]/` overwriting all files when prompted.
 
-If you do not have a `[cmder_root]/config/user-conemu.xml`, you are running an older version of cmder, follow the below process:
+If you do not have a `[cmder_root]/config/user[-|_]conemu.xml`, you are running an older version of cmder, follow the below process:
 
-1. Exit all Cmder sessions and backup `[cmder_root]/vendor/conemu-maximus5/conemu.xml` to `[cmder_root]/config/user-conemu.xml`.
+1. Exit all Cmder sessions and backup `[cmder_root]/vendor/conemu-maximus5/conemu.xml` to `[cmder_root]/config/user[-|_]conemu.xml`.
 
 2. Backup any files you have manually edited under `[cmder_root]/vendor`.
 

launcher/src/CmderLauncher.cpp

@@ -20,6 +20,8 @@
 #define MB_TITLE L"Cmder Launcher"
 #define SHELL_MENU_REGISTRY_PATH_BACKGROUND L"Directory\\Background\\shell\\Cmder"
 #define SHELL_MENU_REGISTRY_PATH_LISTITEM L"Directory\\shell\\Cmder"
+#define SHELL_MENU_REGISTRY_DRIVE_PATH_BACKGROUND L"Drive\\Background\\shell\\Cmder"
+#define SHELL_MENU_REGISTRY_DRIVE_PATH_LISTITEM L"Drive\\shell\\Cmder"
 
 #define streqi(a, b) (_wcsicmp((a), (b)) == 0)
 
@@ -69,7 +71,7 @@ bool FileExists(const wchar_t * filePath)
 	return false;
 }
 
-void StartCmder(std::wstring  path = L"", bool is_single_mode = false, std::wstring taskName = L"", std::wstring cfgRoot = L"", bool use_user_cfg = true)
+void StartCmder(std::wstring  path = L"", bool is_single_mode = false, std::wstring taskName = L"", std::wstring cfgRoot = L"", bool use_user_cfg = true, std::wstring conemu_args = L"")
 {
 #if USE_TASKBAR_API
 	wchar_t appId[MAX_PATH] = { 0 };
@@ -96,6 +98,7 @@ void StartCmder(std::wstring  path = L"", bool is_single_mode = false, std::wstr
 
 	std::wstring cmderStart = path;
 	std::wstring cmderTask = taskName;
+	std::wstring cmderConEmuArgs = conemu_args;
 
 	std::copy(cfgRoot.begin(), cfgRoot.end(), userConfigDirPath);
 	userConfigDirPath[cfgRoot.length()] = 0;
@@ -389,6 +392,11 @@ void StartCmder(std::wstring  path = L"", bool is_single_mode = false, std::wstr
 		swprintf_s(args, L"%s  -loadcfgfile \"%s\"", args, userConEmuCfgPath);
 	}
 
+	if (!streqi(cmderConEmuArgs.c_str(), L""))
+	{
+		swprintf_s(args, L"%s %s", args, cmderConEmuArgs.c_str());
+	}
+
 	SetEnvironmentVariable(L"CMDER_ROOT", exeDir);
 	if (wcscmp(userConfigDirPath, configDirPath) != 0)
 	{
@@ -525,6 +533,7 @@ struct cmderOptions
 	std::wstring cmderStart = L"";
 	std::wstring cmderTask = L"";
 	std::wstring cmderRegScope = L"USER";
+	std::wstring cmderConEmuArgs = L"";
 	bool cmderSingle = false;
 	bool cmderUserCfg = true;
 	bool registerApp = false;
@@ -618,6 +627,12 @@ cmderOptions GetOption()
 					}
 				}
 			}
+			/* Used for passing arguments to conemu prog */
+			else if (_wcsicmp(L"/x", szArgList[i]) == 0)
+			{
+				cmderOptions.cmderConEmuArgs = szArgList[i + 1];
+				i++;
+			}
 			else if (cmderOptions.cmderStart == L"")
 			{
 				int len = wcslen(szArgList[i]);
@@ -633,13 +648,13 @@ cmderOptions GetOption()
 				}
 				else
 				{
-					MessageBox(NULL, L"Unrecognized parameter.\n\nValid options:\n\n    /c [CMDER User Root Path]\n\n    /task [ConEmu Task Name]\n\n    [/start [Start in Path] | [Start in Path]]\n\n    /single\n\n    /m\n\nor\n\n    /register [USER | ALL]\n\nor\n\n    /unregister [USER | ALL]\n", MB_TITLE, MB_OK);
+					MessageBox(NULL, L"Unrecognized parameter.\n\nValid options:\n\n    /c [CMDER User Root Path]\n\n    /task [ConEmu Task Name]\n\n    [/start [Start in Path] | [Start in Path]]\n\n    /single\n\n    /m\n\n    /x [ConEmu extra arguments]\n\nor\n\n    /register [USER | ALL]\n\nor\n\n    /unregister [USER | ALL]\n", MB_TITLE, MB_OK);
 					cmderOptions.error = true;
 				}
 			}
 			else
 			{
-				MessageBox(NULL, L"Unrecognized parameter.\n\nValid options:\n\n    /c [CMDER User Root Path]\n\n    /task [ConEmu Task Name]\n\n    [/start [Start in Path] | [Start in Path]]\n\n    /single\n\n    /m\n\nor\n\n    /register [USER | ALL]\n\nor\n\n    /unregister [USER | ALL]\n", MB_TITLE, MB_OK);
+				MessageBox(NULL, L"Unrecognized parameter.\n\nValid options:\n\n    /c [CMDER User Root Path]\n\n    /task [ConEmu Task Name]\n\n    [/start [Start in Path] | [Start in Path]]\n\n    /single\n\n    /m\n\n    /x [ConEmu extra arguments]\n\nor\n\n    /register [USER | ALL]\n\nor\n\n    /unregister [USER | ALL]\n", MB_TITLE, MB_OK);
 				cmderOptions.error = true;
 			}
 		}
@@ -665,11 +680,15 @@ int APIENTRY _tWinMain(_In_ HINSTANCE hInstance,
 	{
 		RegisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_PATH_BACKGROUND, cmderOptions.cmderCfgRoot, cmderOptions.cmderSingle);
 		RegisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_PATH_LISTITEM, cmderOptions.cmderCfgRoot, cmderOptions.cmderSingle);
+		RegisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_DRIVE_PATH_BACKGROUND, cmderOptions.cmderCfgRoot, cmderOptions.cmderSingle);
+		RegisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_DRIVE_PATH_LISTITEM, cmderOptions.cmderCfgRoot, cmderOptions.cmderSingle);
 	}
 	else if (cmderOptions.unRegisterApp == true)
 	{
 		UnregisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_PATH_BACKGROUND);
 		UnregisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_PATH_LISTITEM);
+		UnregisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_DRIVE_PATH_BACKGROUND);
+		UnregisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_DRIVE_PATH_LISTITEM);
 	}
 	else if (cmderOptions.error == true)
 	{
@@ -677,7 +696,7 @@ int APIENTRY _tWinMain(_In_ HINSTANCE hInstance,
 	}
 	else
 	{
-		StartCmder(cmderOptions.cmderStart, cmderOptions.cmderSingle, cmderOptions.cmderTask, cmderOptions.cmderCfgRoot, cmderOptions.cmderUserCfg);
+		StartCmder(cmderOptions.cmderStart, cmderOptions.cmderSingle, cmderOptions.cmderTask, cmderOptions.cmderCfgRoot, cmderOptions.cmderUserCfg, cmderOptions.cmderConEmuArgs);
 	}
 
 	return 0;

vendor/bin/alias.cmd

@@ -22,10 +22,15 @@ goto parseargument
 
   if /i "%currentarg%" equ "/f" (
     set ALIASES=%~2
+    set _f=%~2
     shift
     goto :do_shift
   ) else if /i "%currentarg%" == "/reload" (
     goto :p_reload
+  ) else if "%currentarg%" equ "/H" (
+    goto :p_help
+  ) else if "%currentarg%" equ "/h" (
+    goto :p_help
   ) else if "%currentarg%" equ "/?" (
     goto :p_help
   ) else if /i "%currentarg%" equ "/d" (
@@ -48,6 +53,7 @@ goto parseargument
       set _x=%*
     )
   )
+
 rem #endregion parseargument
 
 if "%ALIASES%" neq "%CMDER_ROOT%\config\user_aliases.cmd" (
@@ -64,24 +70,24 @@ if "%ALIASES%" neq "%CMDER_ROOT%\config\user_aliases.cmd" (
 )
 
 :: validate alias
-for /f "delims== tokens=1,* usebackq" %%G in (`echo "%_x%"`) do (
+for /f "delims== tokens=1,* usebackq" %%G in (`echo "!_x!"`) do (
   set alias_name=%%G
   set alias_value=%%H
 )
 
 :: leading quotes added while validating
-set alias_name=%alias_name:~1%
+set alias_name=!alias_name:~1!
 
 :: trailing quotes added while validating
-set alias_value=%alias_value:~0,-1%
+set alias_value=!alias_value:~0,-1!
 
 ::remove spaces
 set _temp=%alias_name: =%
 
 if not ["%_temp%"] == ["%alias_name%"] (
-	echo Your alias name can not contain a space
-	endlocal
-	exit /b
+  echo Your alias name can not contain a space
+  endlocal
+  exit /b
 )
 
 :: replace already defined alias
@@ -111,21 +117,32 @@ exit /b
 :p_help
 echo.Usage:
 echo.
-echo.	alias [options] [alias=full command]
+echo.  alias [options] [alias=alias command]
 echo.
 echo.Options:
 echo.
-echo.     /d [alias]     Delete an [alias].
-echo.     /f [macrofile] Path to the [macrofile] you want to store the new alias in.
-echo.                    Default: %cmder_root%\config\user_aliases.cmd
-echo.     /reload        Reload the aliases file.  Can be used with /f argument.
-echo.                    Default: %cmder_root%\config\user_aliases.cmd
+echo.  Note: Options MUST precede the alias definition.
 echo.
-echo.	If alias is called with no parameters, it will display the list of existing aliases.
+echo.  /d [alias]     Delete an [alias].
+echo.  /f [macrofile] Path to the [macrofile] you want to store the new alias in.
+echo.                 Default: %cmder_root%\config\user_aliases.cmd
+echo.  /reload        Reload the aliases file.  Can be used with /f argument.
+echo.                 Default: %cmder_root%\config\user_aliases.cmd
 echo.
-echo.	In the command, you can use the following notations:
-echo.	$* allows the alias to assume all the parameters of the supplied command.
-echo.	$1-$9 Allows you to seperate parameter by number, much like %%1 in batch.
-echo.	$T is the command seperator, allowing you to string several commands together into one alias.
-echo.	For more information, read DOSKEY/?
+echo. If alias is called with no parameters, it will display the list of existing
+echo. aliases.
+echo.
+echo. In the alias command, you can use the following notations:
+echo.
+echo. ^^^^^^^^%% - %% signs in env vars must be escaped if preserving the variable
+echo.         in he alias is desired. Variables in aliases surrounded by double
+echo.         quotes only require '^^%%' vs '^^^^^^^^%%'
+echo. $*    - allows the alias to assume all the parameters of the supplied
+echo.         command.
+echo. $1-$9 - Allows you to seperate parameter by number, much like %%1 in
+echo.         batch.
+echo. $T    - Command seperator, allowing you to string several commands
+echo.         together into one alias.
+echo.
+echo. For more information, read DOSKEY /?
 exit /b

vendor/bin/vscode_init.cmd

@@ -0,0 +1,9 @@
+@echo off
+IF [%1] == [] (
+    REM -- manually opened console (Ctrl + Shift + `) --
+    CALL "%~dp0..\init.bat"
+) ELSE (
+    REM -- task --
+    CALL cmd %*
+    exit
+)

vendor/clink.lua

@@ -189,12 +189,15 @@ end
 -- @return {false|mercurial branch name}
 ---
 local function get_hg_branch()
-    for line in io.popen("hg branch 2>nul"):lines() do
+    local file = io.popen("hg branch 2>nul")
+    for line in file:lines() do
         local m = line:match("(.+)$")
         if m then
+            file:close()
             return m
         end
     end
+    file:close()
 
     return false
 end
@@ -204,12 +207,15 @@ end
 -- @return {false|svn branch name}
 ---
 local function get_svn_branch(svn_dir)
-    for line in io.popen("svn info 2>nul"):lines() do
+    local file = io.popen("svn info 2>nul")
+    for line in file:lines() do
         local m = line:match("^Relative URL:")
         if m then
+            file:close()
             return line:sub(line:find("/")+1,line:len())
         end
     end
+    file:close()
 
     return false
 end
@@ -324,26 +330,26 @@ local function hg_prompt_filter()
             dirty = "\x1b[31;1m",
         }
 
-        -- 'hg id' gives us BOTH the branch name AND an indicator that there
-        -- are uncommitted changes, in one fast(er) call
-        local pipe = io.popen("hg id 2>&1")
+        local pipe = io.popen("hg branch 2>&1")
         local output = pipe:read('*all')
         local rc = { pipe:close() }
 
-        if output ~= nil and
-           string.sub(output,1,7) ~= "abort: " and             -- not an HG working copy
-           string.sub(output,1,12) ~= "000000000000" and       -- empty wc (needs update)
-           (not string.find(output, "is not recognized")) then -- 'hg' not in path
+        -- strip the trailing newline from the branch name
+        local n = #output
+        while n > 0 and output:find("^%s", n) do n = n - 1 end
+        local branch = output:sub(1, n)
+
+        if branch ~= nil and
+           string.sub(branch,1,7) ~= "abort: " and             -- not an HG working copy
+           (not string.find(branch, "is not recognized")) then -- 'hg' not in path
             local color = colors.clean
-            -- split elements on space delimiter
-            local items = {}
-            for i in string.gmatch(output, "%S+") do
-                table.insert(items, i)
-            end
-            -- if the repo hash ends with '+', the wc has uncommitted changes
-            if string.sub(items[1], -1, -1) == "+" then color = colors.dirty end
-            -- substitute the branch in directly -- already WITH parentheses.  :)
-            result = color .. items[2] -- string.sub(items[2], 1, string.len(items[2]) - 1)
+
+            local pipe = io.popen("hg status -amrd 2>&1")
+            local output = pipe:read('*all')
+            local rc = { pipe:close() }
+
+            if output ~= nil and output ~= "" then color = colors.dirty end
+            result = color .. "(" .. branch .. ")"
         end
     end
 

vendor/clink_settings.default

@@ -0,0 +1,116 @@
+# name: Pressing Ctrl-D exits session
+# type: bool
+# Ctrl-D exits cmd.exe when it is pressed on an empty line.
+ctrld_exits = 1
+
+# name: Toggle if pressing Esc clears line
+# type: bool
+# Clink clears the current line when Esc is pressed (unless Readline's Vi mode
+# is enabled).
+esc_clears_line = 1
+
+# name: Match display colour
+# type: int
+# Colour to use when displaying matches. A value less than 0 will be the
+# opposite brightness of the default colour.
+match_colour = -1
+
+# name: Executable match style
+# type: enum
+#  0 = PATH only
+#  1 = PATH and CWD
+#  2 = PATH, CWD, and directories
+# Changes how Clink will match executables when there is no path separator on
+# the line. 0 = PATH only, 1 = PATH and CWD, 2 = PATH, CWD, and directories. In
+# all cases both executables and directories are matched when there is a path
+# separator present. A value of -1 will disable executable matching completely.
+exec_match_style = 2
+
+# name: Whitespace prefix matches files
+# type: bool
+# If the line begins with whitespace then Clink bypasses executable matching and
+# will match all files and directories instead.
+space_prefix_match_files = 1
+
+# name: Colour of the prompt
+# type: int
+# Surrounds the prompt in ANSI escape codes to set the prompt's colour. Disabled
+# when the value is less than 0.
+prompt_colour = -1
+
+# name: Auto-answer terminate prompt
+# type: enum
+#  0 = Disabled
+#  1 = Answer 'Y'
+#  2 = Answer 'N'
+# Automatically answers cmd.exe's 'Terminate batch job (Y/N)?' prompts. 0 =
+# disabled, 1 = answer 'Y', 2 = answer 'N'.
+terminate_autoanswer = 0
+
+# name: Lines of history saved to disk
+# type: int
+# When set to a positive integer this is the number of lines of history that
+# will persist when Clink saves the command history to disk. Use 0 for infinite
+# lines and <0 to disable history persistence.
+history_file_lines = 10000
+
+# name: Skip adding lines prefixed with whitespace
+# type: bool
+# Ignore lines that begin with whitespace when adding lines in to the history.
+history_ignore_space = 0
+
+# name: Controls how duplicate entries are handled
+# type: enum
+#  0 = Always add
+#  1 = Ignore
+#  2 = Erase previous
+# If a line is a duplicate of an existing history entry Clink will erase the
+# duplicate when this is set 2. A value of 1 will not add duplicates to the
+# history and a value of 0 will always add lines. Note that history is not
+# deduplicated when reading/writing to disk.
+history_dupe_mode = 2
+
+# name: Read/write history file each line edited
+# type: bool
+# When non-zero the history will be read from disk before editing a new line and
+# written to disk afterwards.
+history_io = 1
+
+# name: Sets how command history expansion is applied
+# type: enum
+#  0 = Off
+#  1 = On
+#  2 = Not in single quotes
+#  3 = Not in double quote
+#  4 = Not in any quotes
+# The '!' character in an entered line can be interpreted to introduce words
+# from the history. This can be enabled and disable by setting this value to 1
+# or 0. Values or 2, 3 or 4 will skip any ! character quoted in single, double,
+# or both quotes respectively.
+history_expand_mode = 3
+
+# name: Support Windows' Ctrl-Alt substitute for AltGr
+# type: bool
+# Windows provides Ctrl-Alt as a substitute for AltGr, historically to support
+# keyboards with no AltGr key. This may collide with some of Readline's
+# bindings.
+use_altgr_substitute = 1
+
+# name: Strips CR and LF chars on paste
+# type: enum
+#  0 = Paste unchanged
+#  1 = Strip
+#  2 = As space
+# Setting this to a value >0 will make Clink strip CR and LF characters from
+# text pasted into the current line. Set this to 1 to strip all newline
+# characters and 2 to replace them with a space.
+strip_crlf_on_paste = 2
+
+# name: Enables basic ANSI escape code support
+# type: bool
+# When printing the prompt, Clink has basic built-in support for SGR ANSI escape
+# codes to control the text colours. This is automatically disabled if a third
+# party tool is detected that also provides this facility. It can also be
+# disabled by setting this to 0.
+ansi_code_support = 1
+

vendor/init.bat

@@ -138,12 +138,14 @@ if "%CMDER_CLINK%" == "1" (
   if defined CMDER_USER_CONFIG (
     if not exist "%CMDER_USER_CONFIG%\settings" (
       echo Generating clink initial settings in "%CMDER_USER_CONFIG%\settings"
+      copy "%CMDER_ROOT%\vendor\clink_settings.default" "%CMDER_USER_CONFIG%\settings"
       echo Additional *.lua files in "%CMDER_USER_CONFIG%" are loaded on startup.\
     )
     "%CMDER_ROOT%\vendor\clink\clink_x%architecture%.exe" inject --quiet --profile "%CMDER_USER_CONFIG%" --scripts "%CMDER_ROOT%\vendor"
   ) else (
     if not exist "%CMDER_ROOT%\config\settings" (
       echo Generating clink initial settings in "%CMDER_ROOT%\config\settings"
+      copy "%CMDER_ROOT%\vendor\clink_settings.default" "%CMDER_ROOT%\config\settings"
       echo Additional *.lua files in "%CMDER_ROOT%\config" are loaded on startup.
     )
     "%CMDER_ROOT%\vendor\clink\clink_x%architecture%.exe" inject --quiet --profile "%CMDER_ROOT%\config" --scripts "%CMDER_ROOT%\vendor"
@@ -231,7 +233,7 @@ for /F "delims=" %%F in ('where git.exe 2^>nul') do (
 :VENDORED_GIT
 if exist "%CMDER_ROOT%\vendor\git-for-windows" (
     set "GIT_INSTALL_ROOT=%CMDER_ROOT%\vendor\git-for-windows"
-    %lib_console% debug_output "Using vendored Git from '!GIT_INSTALL_ROOT!..."
+    %lib_console% debug_output "Using vendored Git '!GIT_VERSION_VENDORED!' from '!GIT_INSTALL_ROOT!..."
     goto :CONFIGURE_GIT
 ) else (
     goto :NO_GIT
@@ -242,7 +244,7 @@ if exist "%CMDER_ROOT%\vendor\git-for-windows" (
 goto :CONFIGURE_GIT
 
 :FOUND_GIT
-%lib_console% debug_output "Using found Git from '%GIT_INSTALL_ROOT%..."
+%lib_console% debug_output "Using found Git '!GIT_VERSION_USER!' from '%GIT_INSTALL_ROOT%..."
 goto :CONFIGURE_GIT
 
 :CONFIGURE_GIT
@@ -367,9 +369,9 @@ call "%user_aliases%"
 :: Basically we need to execute this post-install.bat because we are
 :: manually extracting the archive rather than executing the 7z sfx
 if exist "%GIT_INSTALL_ROOT%\post-install.bat" (
-    %lib_console% verbose_output "Running Git for Windows one time Post Install...."
+    echo Running Git for Windows one time Post Install....
     pushd "%GIT_INSTALL_ROOT%\"
-    "%GIT_INSTALL_ROOT%\git-bash.exe" --no-needs-console --hide --no-cd --command=post-install.bat
+    "%GIT_INSTALL_ROOT%\git-cmd.exe" --no-needs-console --no-cd --command=post-install.bat
     popd
 )
 

vendor/lib/lib_base.cmd

@@ -65,12 +65,17 @@ exit /b
     echo %comspec% | %WINDIR%\System32\find /i "\tcc.exe" > nul && set "CMDER_SHELL=tcc"
     echo %comspec% | %WINDIR%\System32\find /i "\tccle" > nul && set "CMDER_SHELL=tccle"
 
-    set CMDER_CLINK=1
-    if "%CMDER_SHELL%" equ "tcc" set CMDER_CLINK=0
-    if "%CMDER_SHELL%" equ "tccle" set CMDER_CLINK=0
+    if not defined CMDER_CLINK (
+      set CMDER_CLINK=1
+      if "%CMDER_SHELL%" equ "tcc" set CMDER_CLINK=0
+      if "%CMDER_SHELL%" equ "tccle" set CMDER_CLINK=0
+    )
 
-    set CMDER_ALIASES=1
-    if "%CMDER_SHELL%" equ "tcc" set CMDER_ALIASES=0
-    if "%CMDER_SHELL%" equ "tccle" set CMDER_ALIASES=0
+
+    if not defined CMDER_ALIASES (
+      set CMDER_ALIASES=1
+      if "%CMDER_SHELL%" equ "tcc" set CMDER_ALIASES=0
+      if "%CMDER_SHELL%" equ "tccle" set CMDER_ALIASES=0
+    )
 
     exit /b

vendor/lib/lib_git.cmd

@@ -88,8 +88,11 @@ exit /b
 :::  [SCOPE]_BUILD <out> Scoped Build version.
 :::-------------------------------------------------------------------------------
 
-    setlocal enabledelayedexpansion
     :: process a `x.x.x.xxxx.x` formatted string
+    set "%~1_MAJOR="
+    set "%~1_MINOR="
+    set "%~1_PATCH="
+    set "%~1_BUILD="
     %lib_console% debug_output :parse_version "ARGV[1]=%~1, ARGV[2]=%~2"
     for /F "tokens=1-3* delims=.,-" %%A in ("%2") do (
         set "%~1_MAJOR=%%A"
@@ -98,7 +101,6 @@ exit /b
         set "%~1_BUILD=%%D"
     )
 
-    endlocal & set "%~1_MAJOR=!%~1_MAJOR!" & set "%~1_MINOR=!%~1_MINOR!" & set "%~1_PATCH=!%~1_PATCH!" & set "%~1_BUILD=!%~1_BUILD!"
     exit /b
 
 :validate_version

vendor/profile.ps1

@@ -25,9 +25,9 @@ if (! $ENV:CMDER_ROOT ) {
 # Remove trailing '\'
 $ENV:CMDER_ROOT = (($ENV:CMDER_ROOT).trimend("\"))
 
-# do not load bundled psget if a module installer is already available
+# Do not load bundled psget if a module installer is already available
 # -> recent PowerShell versions include PowerShellGet out of the box
-$moduleInstallerAvailable = [bool](Get-Command -Name 'Install-Module' -ErrorAction SilentlyContinue | Out-Null)
+$moduleInstallerAvailable = [bool](Get-Command -Name 'Install-Module' -ErrorAction SilentlyContinue)
 
 # Add Cmder modules directory to the autoload path.
 $CmderModulePath = Join-path $PSScriptRoot "psmodules/"
@@ -36,26 +36,21 @@ if(-not $moduleInstallerAvailable -and -not $env:PSModulePath.Contains($CmderMod
     $env:PSModulePath = $env:PSModulePath.Insert(0, "$CmderModulePath;")
 }
 
-try {
-    Get-command -Name "vim" -ErrorAction Stop >$null
-} catch {
-    # # You could do this but it may be a little drastic and introduce a lot of
-    # # unix tool overlap with powershel unix like aliases
-    # $env:Path += $(";" + $env:CMDER_ROOT + "\vendor\git-for-windows\usr\bin")
-    # set-alias -name "vi" -value "vim"
-    # # I think the below is safer.
+function Configure-Git($GIT_INSTALL_ROOT){
+  $env:Path += $(";" + $GIT_INSTALL_ROOT + "\cmd")
 
-    new-alias -name "vim" -value $($ENV:CMDER_ROOT + "\vendor\git-for-windows\usr\bin\vim.exe")
-    new-alias -name "vi" -value vim
-}
-
-try {
-    # Check if git is on PATH, i.e. Git already installed on system
-    Get-command -Name "git" -ErrorAction Stop >$null
-} catch {
-    $env:Path += $(";" + $env:CMDER_ROOT + "\vendor\git-for-windows\cmd")
-    # for bash.exe, which in the cmd version is found as <GIT>\usr\bin\bash.exe
-    $env:Path += $(";" + $env:CMDER_ROOT + "\vendor\git-for-windows\bin")
+  # Add "$GIT_INSTALL_ROOT\usr\bin" to the path if exists and not done already
+  $GIT_INSTALL_ROOT_ESC=$GIT_INSTALL_ROOT.replace('\','\\')
+  if ((test-path "$GIT_INSTALL_ROOT\usr\bin") -and -not ($env:path -match "$GIT_INSTALL_ROOT_ESC\\usr\\bin")) {
+      $env:path = "$env:path;$GIT_INSTALL_ROOT\usr\bin"
+  }
+  
+  # Add "$GIT_INSTALL_ROOT\mingw[32|64]\bin" to the path if exists and not done already
+  if ((test-path "$GIT_INSTALL_ROOT\mingw32\bin") -and -not ($env:path -match "$GIT_INSTALL_ROOT_ESC\\mingw32\\bin")) {
+      $env:path = "$env:path;$GIT_INSTALL_ROOT\mingw32\bin"
+  } elseif ((test-path "$GIT_INSTALL_ROOT\mingw64\bin") -and -not ($env:path -match "$GIT_INSTALL_ROOT_ESC\\mingw64\\bin")) {
+      $env:path = "$env:path;$GIT_INSTALL_ROOT\mingw64\bin"
+  }
 }
 
 $gitLoaded = $false
@@ -84,6 +79,19 @@ function checkGit($Path) {
     }
 }
 
+try {
+    # Check if git is on PATH, i.e. Git already installed on system
+    Get-command -Name "git" -ErrorAction Stop >$null
+} catch {
+    if (test-path "$env:CMDER_ROOT\vendor\git-for-windows") {
+        Configure-Git "$env:CMDER_ROOT\vendor\git-for-windows"
+    }
+}
+
+if ( Get-command -Name "vim" -ErrorAction silentlycontinue) {
+    new-alias -name "vi" -value vim
+}
+
 if (Get-Module PSReadline -ErrorAction "SilentlyContinue") {
     Set-PSReadlineOption -ExtraPromptLineCount 1
 }
@@ -91,36 +99,6 @@ if (Get-Module PSReadline -ErrorAction "SilentlyContinue") {
 # Enhance Path
 $env:Path = "$Env:CMDER_ROOT\bin;$Env:CMDER_ROOT\vendor\bin;$env:Path;$Env:CMDER_ROOT"
 
-#
-# Prompt Section
-#   Users should modify their user_profile.ps1 as it will be safe from updates.
-#
-
-# Pre assign the hooks so the first run of cmder gets a working prompt.
-[ScriptBlock]$PrePrompt = {}
-[ScriptBlock]$PostPrompt = {}
-[ScriptBlock]$CmderPrompt = {
-    $Host.UI.RawUI.ForegroundColor = "White"
-    Microsoft.PowerShell.Utility\Write-Host $pwd.ProviderPath -NoNewLine -ForegroundColor Green
-    checkGit($pwd.ProviderPath)
-}
-
-<#
-This scriptblock runs every time the prompt is returned.
-Explicitly use functions from MS namespace to protect from being overridden in the user session.
-Custom prompt functions are loaded in as constants to get the same behaviour
-#>
-[ScriptBlock]$Prompt = {
-    $realLASTEXITCODE = $LASTEXITCODE
-    $host.UI.RawUI.WindowTitle = Microsoft.PowerShell.Management\Split-Path $pwd.ProviderPath -Leaf
-    PrePrompt | Microsoft.PowerShell.Utility\Write-Host -NoNewline
-    CmderPrompt
-    Microsoft.PowerShell.Utility\Write-Host "`nλ " -NoNewLine -ForegroundColor "DarkGray"
-    PostPrompt | Microsoft.PowerShell.Utility\Write-Host -NoNewline
-    $global:LASTEXITCODE = $realLASTEXITCODE
-    return " "
-}
-
 # Drop *.ps1 files into "$ENV:CMDER_ROOT\config\profile.d"
 # to source them at startup.
 if (-not (test-path "$ENV:CMDER_ROOT\config\profile.d")) {
@@ -154,7 +132,7 @@ if ($ENV:CMDER_USER_CONFIG -ne "" -and (test-path "$ENV:CMDER_USER_CONFIG\profil
     }
     popd
 }
-    
+
 # Renaming to "config\user_profile.ps1" to "user_profile.ps1" for consistency.
 if (test-path "$env:CMDER_ROOT\config\user-profile.ps1") {
   rename-item  "$env:CMDER_ROOT\config\user-profile.ps1" user_profile.ps1
@@ -185,11 +163,54 @@ if (! (Test-Path $CmderUserProfilePath) ) {
     Copy-Item "$env:CMDER_ROOT\vendor\user_profile.ps1.default" -Destination $CmderUserProfilePath
 }
 
-# Once Created these code blocks cannot be overwritten
-Set-Item -Path function:\PrePrompt   -Value $PrePrompt   -Options Constant
-Set-Item -Path function:\CmderPrompt -Value $CmderPrompt -Options Constant
-Set-Item -Path function:\PostPrompt  -Value $PostPrompt  -Options Constant
+#
+# Prompt Section
+#   Users should modify their user_profile.ps1 as it will be safe from updates.
+#
 
-# Functions can be made constant only at creation time
-# ReadOnly at least requires `-force` to be overwritten
-Set-Item -Path function:\prompt  -Value $Prompt  -Options ReadOnly
+# Only set the prompt if it is currently set to the default
+# This allows users to configure the prompt in their user_profile.ps1 or config\profile.d\*.ps1
+if ( $(get-command prompt).Definition -match 'PS \$\(\$executionContext.SessionState.Path.CurrentLocation\)\$\(' -and `
+  $(get-command prompt).Definition -match '\(\$nestedPromptLevel \+ 1\)\) ";') {
+  # Pre assign the hooks so the first run of cmder gets a working prompt.
+  [ScriptBlock]$PrePrompt = {}
+  [ScriptBlock]$PostPrompt = {}
+  [ScriptBlock]$CmderPrompt = {
+      $Host.UI.RawUI.ForegroundColor = "White"
+      Microsoft.PowerShell.Utility\Write-Host $pwd.ProviderPath -NoNewLine -ForegroundColor Green
+      if (get-command git -erroraction silentlycontinue) {
+          checkGit($pwd.ProviderPath)
+      }
+  }
+
+  <#
+  This scriptblock runs every time the prompt is returned.
+  Explicitly use functions from MS namespace to protect from being overridden in the user session.
+  Custom prompt functions are loaded in as constants to get the same behaviour
+  #>
+  [ScriptBlock]$Prompt = {
+      $realLASTEXITCODE = $LASTEXITCODE
+      $host.UI.RawUI.WindowTitle = Microsoft.PowerShell.Management\Split-Path $pwd.ProviderPath -Leaf
+      PrePrompt | Microsoft.PowerShell.Utility\Write-Host -NoNewline
+      CmderPrompt
+      Microsoft.PowerShell.Utility\Write-Host "`nλ " -NoNewLine -ForegroundColor "DarkGray"
+      PostPrompt | Microsoft.PowerShell.Utility\Write-Host -NoNewline
+      $global:LASTEXITCODE = $realLASTEXITCODE
+      return " "
+  }
+
+
+  # Once Created these code blocks cannot be overwritten
+  # if (-not $(get-command PrePrompt).Options -match 'Constant') {Set-Item -Path function:\PrePrompt   -Value $PrePrompt   -Options Constant}
+  # if (-not $(get-command CmderPrompt).Options -match 'Constant') {Set-Item -Path function:\CmderPrompt -Value $CmderPrompt -Options Constant}
+  # if (-not $(get-command PostPrompt).Options -match 'Constant') {Set-Item -Path function:\PostPrompt  -Value $PostPrompt  -Options Constant}
+
+  Set-Item -Path function:\PrePrompt   -Value $PrePrompt   -Options Constant
+  Set-Item -Path function:\CmderPrompt -Value $CmderPrompt -Options Constant
+  Set-Item -Path function:\PostPrompt  -Value $PostPrompt  -Options Constant
+
+  # Functions can be made constant only at creation time
+  # ReadOnly at least requires `-force` to be overwritten
+  # if (!$(get-command Prompt).Options -match 'ReadOnly') {Set-Item -Path function:\prompt  -Value $Prompt  -Options ReadOnly}
+  Set-Item -Path function:\prompt  -Value $Prompt  -Options ReadOnly
+}

vendor/sources.json

@@ -1,8 +1,8 @@
 [
     {
         "name": "git-for-windows",
-        "version": "v2.19.0.windows.1",
-        "url": "https://github.com/git-for-windows/git/releases/download/v2.19.0.windows.1/PortableGit-2.19.0-64-bit.7z.exe"
+        "version": "v2.21.0.windows.1",
+        "url": "https://github.com/git-for-windows/git/releases/download/v2.21.0.windows.1/PortableGit-2.21.0-64-bit.7z.exe"
     },
     {
         "name": "clink",

vendor/user_aliases.cmd.default

@@ -9,7 +9,7 @@ gl=git log --oneline --all --graph --decorate  $*
 ls=ls --show-control-chars -F --color $*
 pwd=cd
 clear=cls
-history=cat "%CMDER_ROOT%\config\.history"
+history=cat -n "%CMDER_ROOT%\config\.history"
 unalias=alias /d $1
 vi=vim $*
 cmderr=cd /d "%CMDER_ROOT%"

vendor/user_profile.ps1.default

@@ -23,3 +23,19 @@
 
 ## <Continue to add your own>
 
+# # Delete default powershell aliases that conflict with bash commands
+# if (get-command git) {
+#     del -force alias:cat
+#     del -force alias:clear
+#     del -force alias:cp
+#     del -force alias:diff
+#     del -force alias:echo
+#     del -force alias:kill
+#     del -force alias:ls
+#     del -force alias:mv
+#     del -force alias:ps
+#     del -force alias:pwd
+#     del -force alias:rm
+#     del -force alias:sleep
+#     del -force alias:tee
+# }