Merge pull request #2648 from daxgames/fix_posh_colors

Fix posh colors

.github/issue_template.md

@@ -10,16 +10,18 @@
 
   • Searched for existing issues (including the **closed** ones)
     for the similar problems here:
+
     https://github.com/cmderdev/cmder/issues?q=is:issue
 
-  • Read the README.md and the Wiki:
+  • Read both the README.md and the Wiki:
+
     - https://github.com/cmderdev/cmder/blob/master/README.md
     - https://github.com/cmderdev/cmder/wiki
 
     (What you may be asking here could already be explained there!)
 
-  • Please understand that Cmder by default uses ConEmu as the
-    underlying Terminal Emulator. If your issue is regarding
+  • Please understand that Cmder uses ConEmu as the default
+    underlying Terminal Emulator.  If your issue is regarding
     the **Terminal Emulator**, please visit the ConEmu issues page:
 
     https://github.com/Maximus5/ConEmu/issues?q=is:issue
@@ -31,9 +33,10 @@
 
     more info: https://conemu.github.io/en/ThirdPartyProblems.html
 
-  • If you are asking for guides on how to integrate Cmder into
-    your favorite IDE of choice, or how to perform an specific
-    task with Cmder, make sure you visit our label section first!
+  • If you would like to ask for guides on how to integrate Cmder with
+    your favorite IDE of choice, or how to perform a specific task
+    with Cmder, make sure you visit our label section first.
+
     You may already have an answer under the Guides or Questions section.
 
     For a list of labels, visit:
@@ -41,32 +44,59 @@
 
     (Be sure to also check “Closed” issues in the labels section!)
 
-  • If the issue is regarding the other upstream technologies that
-    Cmder uses (e.g. Clink, Git, etc), please make sure that the
-    bug you are reporting only applies when they are used in
-    combination with Cmder. If the bug applies when the mentioned
-    tools are NOT used within Cmder, there's a good chance that
-    you should open the bug at the corresponding repo instead.
+  • If you have a request to provide auto-complete support for a new tool,
+    please post your request here:
+
+    https://github.com/vladimir-kotikov/clink-completions/issues
+
+  • If you are having an issue with any of the **upstream technologies**
+    that are used by Cmder, please make sure that the issue is reproducible
+    _only_ when used in combination with Cmder.
+
+    We may not directly address the issues related to the following tools:
+       - Clink, the default shell in Cmder
+       - ConEmu, the terminal emulator
+       - Git/MinGW, which also provide *NIX tools
+       - clink-completions, which provide autocompletion
+
+    The issues related to upstream technologies are labeled as 👆 [name].
+
+    We'll try our best to help you -- but we recommend creating an issue
+    specifically at each of the corresponding repositories for the best
+    result.
+
+    ► Try to reproduce the bug you're reporting, on a stand-alone edition
+      of each tool, without using Cmder.  If the bug applies when the
+      mentioned tools are NOT used within Cmder, there's a good chance that
+      you should open the bug at the corresponding repo instead.
+
+  • Lastly, have a look at official documentation for Cmder over
+    our website, and our wiki.
 
     Read more on about Cmder on ConEmu docs:
     https://conemu.github.io/en/cmder.html
 
 
-  Thank you for making sure you are opening a new valid issue!
+  Thank you for making sure you are opening a new valid issue! ♥
 
 -->
 
 <!--
   Some tips on how to write a better report:
-  - Put an `x` into all the boxes [ ] relevant to your issue (example: [x]).
+  - Put an `x` into all the boxes [ ] relevant to your issue (correct example: [x] -- not like this: [ x] or [x ]).
+  - Any text that is between the the commment tags will get ignored, e.g.: <!-- this will NOT work -- >
+    You need to write your text either outside the tags, or the line below it.
   - Use the *Preview* tab to see how your issue will actually look like, before sending it.
+    ⚠ If for some reason you can not see the text you just wrote, make sure you've read the instructions clearly
   - Make sure the description is worded well enough to be understood, and with as much context and examples as possible.
   - Post a screenshot or the command the triggered the problem, if applicable.
   - Avoid using ambiguous phrases like: doesn't work, there'a problem, etc.
     Help us reproduce the issue by explaining what went wrong, and what did you expect to happen.
   - Please keep the ticket language to English only here.
     We can't process your issue if it's written in Russian or Chinese as we can't understand them.
+  - You can find the version of Cmder.exe and ConEmu.exe binaries using Right Click → Properties → Details menu.
   - ⚠ Read the following page to avoid posting a bad issue: https://conemu.github.io/en/BadIssue.html
+  - Failure to follow these guidelines may result in your issue getting closed. So please follow it carefully!
 -->
 
 ### Purpose of the issue
@@ -74,5 +104,10 @@
 - [ ] Feature request (request for new functionality)
 - [ ] Question
 
+### Version Information
+<!-- Please write your Cmder and ConEmu version below this line -->
+
+<!-- If applicable, write down your Windows edition too below this line (e.g. Windows 10 Pro 1903) -->
+
 ### Description of the issue
-<!-- Provide a clear, simple description of your issue here -->
+<!-- Provide a clear, simple description of your issue below this line -->

.github/stale.yml

@@ -0,0 +1,19 @@
+# Number of days of inactivity before an issue becomes stale
+daysUntilStale: 30
+# Number of days of inactivity before a stale issue is closed
+daysUntilClose: 7
+# Issues with these labels will never be considered stale
+exemptLabels:
+  - "📌 Pinned"
+# Label to use when marking an issue as stale
+staleLabel: "👀 Awaiting Response"
+# Comment to post when marking an issue as stale. Set to `false` to disable
+markComment: >
+  This issue has been automatically marked as stale because it has not had
+  any recent activity. It will be closed in a week if no further activity occurs.
+  Thank you for your contribution(s).
+# Comment to post when closing a stale issue. Set to `false` to disable
+closeComment: >
+  This issue has been automatically closed due to it not having any
+  activity since it was marked as stale.
+  Thank you for your contribution(s).

.gitignore

@@ -3,15 +3,19 @@
 
 bin/*
 !bin/Readme.md
+opt/*
+!opt/Readme.md
 
 vendor/*/*
 !vendor/bin/*
 !vendor/lib/*
 !vendor/*
-!vendor/psmodules/PsGet
+!vendor/psmodules/*
+vendor/git-for-windows
 
 config/*
 !config/Readme.md
+!config/profile.d/README.md
 
 config_user/*
 

CHANGELOG.md

@@ -1,5 +1,338 @@
 # Change Log
 
+## [1.3.19](https://github.com/cmderdev/cmder/tree/v1.3.19) (2022-01-15)
+
+### Changes
+
+- Update Git for Windows to 2.34.0
+- Update to Clink 1.2.46
+- Update to stable Conemu 210912
+- Do not rely on having a `%cmder_root%\config\cmder_prompt_config.lua`
+
+### Adds
+
+- Powershell Git version Discovery - See #2373 for the full proposal.
+  - Find user installed Git on Path
+    - If found
+      - if newer than Cmder embedded Git
+        - Use it's existing Path config and completely ignore embedded Git.
+      - Else if Cmder embedded Git exists and is newer
+        - Match User installed Git path config using Cmder embedded Git folders.
+    - Else if Cmder embedded Git exists 
+      - Add Cmder embedded Git folders to the path.
+        - `$env:cmder_root\vendor\git-for-windows\cmd;$env:path`
+        - `$env:path;$env:cmder_root\vendor\git-for-windows\usr\bin`
+        - `$env:path;$env:cmder_root\vendor\git-for-windows\mingw64\bin`
+- Configurable prompt for `cmd.exe` sessions.  See `%cmder_root%\config\cmder_prompt_config.lua`
+  - Configurable colors
+  - Option to change `λ` to another character.
+  - Option to add `[user]@[host]` to the prompt
+  - Option to use of `~` to represent `$HOME` folder.
+  - Option to use folder name vs. full working directory path in prompt.
+  - Option to use single line prompt.
+
+### Fixes
+
+- Git prompt opt-out works better with additional changes to `clink-completions`
+
+## [1.3.18](https://github.com/cmderdev/cmder/tree/v1.3.18) (2021-3-26)
+
+### Changes
+
+- Update to Clink 1.1.45 to fix #2451, #2465,  and #2473
+- Update to ConEmu v21.03.04
+- `init.bat` auto migrates the history alias to use `clink history` if required.
+- Remove Tilde match from clink.lua in favor of builtin Clink capability.
+
+## [1.3.17](https://github.com/cmderdev/cmder/tree/v1.3.17) (2020-12-23)
+### Fixes
+
+- [bug] Running `alias ..=cd ..` removes other aliases #2394
+- Switch to @chrisant996 [Clink](https://github.com/chrisant996/clink/) v1.1.10 to fix Clink newer Windows 10 releases.
+- Fix `\Git\cmd\git.exe found. was unexpected at this time.`
+- Documentation fixes.
+
+### Changes
+
+- Update Git to 2.29.0
+- Improve `init.bat` Speed
+- Add `systeminfo.exe` output to iag scripts.
+
+## [1.3.16](https://github.com/cmderdev/cmder/tree/v1.3.16) (2020-07-29)
+
+### Fixes
+
+* Merge pull request #2357 from FloSchwalm/fix-git-version-comparison  [Dax T Games]                                                                   
+* Merge pull request #2339 from daxgames/fix_global_vars_vscode_err  [Dax T Games]                                                                     
+
+### Changes
+
+* Merge pull request #2358 from FloSchwalm/update-to-git-2.28  [Dax T Games]               
+                                                                                                                                                                          
+## [1.3.15](https://github.com/cmderdev/cmder/tree/v1.3.15) (2020-06-26)
+
+* Fixes #2247, fixes #2254 [#2265](https://github.com/cmderdev/cmder/pull/2265)
+* Clink path get broken if clink-completions content is created in a different order #2278Clink path get broken if clink-completions content is created in a different order [#2278](https://github.com/cmderdev/cmder/pull/2278)
+* Move Git functions to `lib/git.bat` [#2293](https://github.com/cmderdev/cmder/pull/2293)
+* Fix Cmder issue #2290 [#2294](https://github.com/cmderdev/cmder/pull/2294)
+* Update git for windows to 2.26.2 [#2308](https://github.com/cmderdev/cmder/pull/2308)
+* Update README.md #2323Update README.md [#2323](https://github.com/cmderdev/cmder/pull/2323)
+* Added support for setting custom icons for Cmder window [#2335](https://github.com/cmderdev/cmder/pull/2335)
+* Fix and enhance enhance_path_recursive [#2311](https://github.com/cmderdev/cmder/pull/2311)
+
+## [1.3.14](https://github.com/cmderdev/cmder/tree/v1.3.14) (2020-01-08)
+
+### Fixes
+
+* Pull Request: [#2222](https://github.com/cmderdev/cmder/pull/2222)
+  * Cmder v1.3.13 init script fails. [#2218](https://github.com/cmderdev/cmder/issues/2218)
+  * Git & env related error messages. [#2220](https://github.com/cmderdev/cmder/issues/2220)
+  * Latest addition of "--nolog" clink breaks cmd prompts. [#2166](https://github.com/cmderdev/cmder/issues/2166)
+  * `/nix_tools 0` should prevent adding `%GIT_INSTALL_ROOT%\mingw64\bin` to PATH. [#2214](https://github.com/cmderdev/cmder/issues/2214)
+
+### Changes
+
+* Update Git for Windows to 2.24.1.windows.2
+  * Pull Request: [#2237](https://github.com/cmderdev/cmder/pull/2237)
+* Update clink-completions to 0.3.5
+  * Pull Request: [#2223](https://github.com/cmderdev/cmder/pull/2223)
+
+## [1.3.13](https://github.com/cmderdev/cmder/tree/v1.3.13) (2019-11-03)
+
+### Changes
+
+* Update to Conemu 19.10.12
+
+### Adds
+
+* #2197, #1364, #447 Add ability to disable git status either globally or for individual repos.
+  * To disable git status globally add the following to `~/.gitconfig` or locally for a single repo `[repo]/.git/config`:
+
+    ```
+    [cmder]
+      status = false
+    ```
+
+* #2174 `--` Syntax to pass command line options to Conemu.
+* Disable Clink Logging
+* Add `~` tab completion.
+
+
+### Fixes
+
+* Fix #2191: profile.ps1: CheckGit does not export $gitLoaded
+* Fix #2192: Set default prompt hooks before loading user profile
+* Fix #2097, #1899: powershell foreground color changing to green
+* Fix #1979: Update Clink Completions to 0.3.4
+* Fix #1678: Cmder corrupting path with `!` in Cmder folder path.
+
+
+## [1.3.12](https://github.com/cmderdev/cmder/tree/v1.3.12) (2019-08-19)
+
+### Fixes
+
+* Pull Request: [#2113](https://github.com/cmderdev/cmder/pull/2113)
+  * Add `vendor\bin\vscode_init.cmd` for use with Visual Studio Code
+  * Fixes [#2118](https://github.com/cmderdev/cmder/issues/2118)
+  * Fixes [#1985](https://github.com/cmderdev/cmder/issues/1985)
+* Pull Request: [#2106](https://github.com/cmderdev/cmder/pull/2106)
+  * Portable Git requires running `post-install.bat` which deletes itself when done.  This was not happening.
+  * Resolves [#2105](https://github.com/cmderdev/cmder/issues/2105) 
+* Pull Request: [#2002](https://github.com/cmderdev/cmder/pull/2002)
+  * Updated the HG prompt code to use the '-ib' option to 'hg id' so the branch name is always available, regardless of the state of the working copy
+
+### Changes
+
+* Pull Request: [#2055](https://github.com/cmderdev/cmder/pull/2055)
+  * Upgrade git to 2.21.0
+  * Provide default settings for Clink that updates the history file in real time
+    * Turn this on in existing Cmder using `clink set history_io 1`
+  * Allow clink disable by setting CMDER_CLINK=0 before starting task
+* Pull Request: [#2068](https://github.com/cmderdev/cmder/pull/2068)
+  * Print Index in History Command Output.
+  * Sets default `history_expand_mode = 3` in initial Clink Settings.
+
+### Adds
+
+* Pull Request  : [#2096](https://github.com/cmderdev/cmder/pull/2096)
+  * Question issue: [#2094](https://github.com/cmderdev/cmder/issues/2094)
+  * New argument created to ConEmu forwarding arguments.
+    * Syntax: `/x [ConEmu extras arguments]`
+    *   e.g.: `Cmder.exe /x "-min -tsa"`
+
+* Pull Request: [#2072](https://github.com/cmderdev/cmder/pull/2072)
+  * New alias create [alias] [alias command] syntax
+    * Based on [#1750](https://github.com/cmderdev/cmder/pull/1750)
+    * Syntax: `alias create [alias] [alias command]`
+
+## [1.3.11](https://github.com/cmderdev/cmder/tree/v1.3.11) (2018-12-22)
+
+### Fixes
+
+* Fix uncommenting `call ssh-agent` in `user_profile.cmd` breaks Cmder prompt. [#1990](https://github.com/cmderdev/cmder/issues/1990), [#1807](https://github.com/cmderdev/cmder/issues/1807), [#1785](https://github.com/cmderdev/cmder/issues/1785), [#1885](https://github.com/cmderdev/cmder/issues/1885)
+  * Pull Request: [#1999](https://github.com/cmderdev/cmder/issues/1999) fix ssh-agent call in user_profile.cmd.default
+* Unable to use '%' character in git branch names [#1779](https://github.com/cmderdev/cmder/issues/1779)
+  * Pull Request: [#1991](https://github.com/cmderdev/cmder/issues/1991) add percent escaping for string.gsub 
+* sort command, unix vs windows (/usr/bin/sort vs sort.exe) [#1931](https://github.com/cmderdev/cmder/issues/1931)
+  * Pull Request: [#1988](https://github.com/cmderdev/cmder/issues/1988) Prefer /nix_tools option
+
+### Adds
+
+* [#1988](https://github.com/cmderdev/cmder/issues/1988) Prefer /nix_tools option
+* [#1982](https://github.com/cmderdev/cmder/issues/1982) make /register work with /single
+* [#1975](https://github.com/cmderdev/cmder/issues/1975) Add `/nix_tools 0` option to init.bat to prevent adding !GIT_INSTALL_ROOT!\usr\bin to PATH
+
+
+### Changes
+
+* [#1987](https://github.com/cmderdev/cmder/issues/1987) Use default files for default user profiles
+
+## [1.3.10](https://github.com/cmderdev/cmder/tree/v1.3.10) (2018-11-30)
+
+### Fixes
+
+* Replaces Cmder Release v1.3.9 which has been removed.
+* /c now completely separates user config including Conemu configuration. This enables true multi-user Cmder with no configuration collisions. See PR #1949.
+* Fix #1959 Start cmder "find" errors. See PR #1961.
+* Fix #1956 Git detection should use env from git install root. See PR #1969
+
+### Adds
+
+* /m initially creates %cmder_root%/config/conemu-%computername%.xml for users that want per computer Conemu configuration with shared init scripts. See PR #1949.
+* /register now recognizes /c [path] and creates an appropriate Cmder Here shell context menu. See PR #1949.
+
+## [1.3.8](https://github.com/cmderdev/cmder/tree/v1.3.8) (2018-11-10)
+
+### Fixes
+
+* Fix \vendor\bin\timer.cmd was unexpected at this time. on session start.
+
+## [1.3.7](https://github.com/cmderdev/cmder/tree/v1.3.7) (2018-11-10)
+## Updated components
+
+* ConEmu to 180626
+* Update Git to 2.19.0
+
+## Fixes:
+
+* Cmder now opens in the in the current working dir
+
+## Commits
+### Aaron Arney (1):
+
+* Update README
+
+### Arion Roberto Krause (1):
+
+* Fixed typo
+
+### Benjamin Staneck (8):
+
+* Revert "replace user-aliases with user_aliases"
+* replace user-aliases with user_aliases
+* better fix for #1265
+* Revert "sanitize dir before assigning to prompt"
+* sanitize dir before assigning to prompt
+* Update CHANGELOG.md
+
+### Bob Hood (1):
+
+* Refactored the Mercurial prompt code to be more efficient.
+
+### David Refoua (1):
+
+* fix some spelling issues
+
+### Dax T Games (30):
+
+* Revert "Ignore %cmder_root%\config (#1945)"
+* Ignore %cmder_root%\config (#1945)
+* Add /f for fast init. (#1942)
+* add diag helper scripts and adds to the path (#1918)
+* Fix #1806 #1675 (#1870)
+* Profile.ps1 (#1796)
+* Fix lib base (#1794)
+* Little Changes
+* Fixed move of default conemu.xml to the vendor folder
+* ignore all of config folder
+* move default comemu.xml to vendor folder
+* fixes
+* more headers
+* init.bat update for cexec
+* git prompt yellow
+* fix user lua and git detection
+* allow conditionally setting environment variables
+* added exit codes
+* flag_exists.cmd to flag_exec.cmd, also to lib as an option
+* fixed
+* handle start dir args with trailing "
+* cleanup
+* '.gitignore'
+* verbose output
+* cmder_shell settings
+* add cmder_shell method
+* replace - with \_ in debug-output and verbose-output
+* Trying to get tcc working
+* move user-aliases.cmd to user_aliases.cmd
+* move bin\alias.bat to vendor\bin\alias.cmd
+* fix /unregister
+
+### Dmitri S. Guskov (2):
+
+* Powershell 5.1 compatibility
+* Update profile.ps1
+
+### Gregory Lucas (1):
+
+* Initialize time_init to fix init error message
+
+### Josef Pihrt (2):
+
+* Fix typos, remove escaping inside inline code, replace single quote with backtick
+* Fix typo and broken link
+
+### Merlin (1):
+
+* Remove duplicate Install-Module detection
+
+### Nicolas Arnaud-Cormos (1):
+
+* Ensure the right git path is found in case of shim.
+
+### Thorsten Sommer (1):
+
+* Fixed spelling
+
+### gaoslin (1):
+
+* Update init.bat
+
+### leochien0102 (1):
+
+* fix the 'was unexpected at this time.'
+
+### xiazeyu (4):
+
+* chore: unite slash
+* docs: update to latest useage
+* refactor: reduce global varible useage, fixed quote issue, added parameters support
+* doc: fix typo
+
+### xiazeyu_2011 (8):
+
+* docs: migrated instructions to the wiki pages
+* rename /bin/have.bat to /vendor/lib/flag_exists.cmd
+* fix: bug when no argument is passed in
+* docs: update doc for have.bat
+* feat: add have.bat as a wrapper
+* Optimize comments of using arguments in user-profile.cmd
+* fix conflict with init.bat build-in command parser, update user-profile.cmd
+* Pass arguments to user-profile.cmd
+
+刘祺 (1):
+
+* add LANG support
+
 ## [1.3.6](https://github.com/cmderdev/cmder/tree/v1.3.6) (2018-05-30)
 **Updated components:**
 

CONTRIBUTING.md

@@ -7,7 +7,7 @@ If you follow them your contribution will likely be pulled in quicker.
 ## Getting Started
 
 * Fork the repository on GitHub (It's that easy)
-* Create a feature branch based on the development branch.
+* Create a feature branch based on the `master` branch.
 
 ## Making Changes
 

README.md

@@ -23,19 +23,29 @@ The Cmder's user interface is also designed to be more eye pleasing, and you can
 ### Shared Cmder install with Non-Portable Individual User Config
 1. Download the [latest release](https://github.com/cmderdev/cmder/releases/)
 2. Extract the archive to a shared location.
-3. (optional) Place your own executable files into the `%cmder_root%\bin` folder to be injected into your PATH.
-4. (optional) Create `%userprofile%\cmder_config\bin` folder to be injected into individual users PATH.  Default is to auto create this on first run.
-5. (optional) Place your own executable files into the `%userprofile%\cmder_config\bin` folder to be injected into your PATH.
-6. Run `Cmder.exe` with `/C` command line argument. Example: `cmder.exe /C %userprofile%\cmder_config`
+3. (optional) Place your own executable files and custom app folders into the `%cmder_root%\bin`. See: [bin/README.md](./bin/Readme.md)
+   - This folder to be injected into your PATH by default.
+   - See `/max_depth [1-5]` in 'Command Line Arguments for `init.bat`' table to add subdirectories recursively.
+4. (optional) Place your own custom app folders into the `%cmder_root%\opt`. See: [opt/README.md](./opt/Readme.md)
+   - This folder will NOT be injected into your PATH so you have total control of what gets added.
+5. Run `Cmder.exe` with `/C` command line argument. Example: `cmder.exe /C %userprofile%\cmder_config`
    * This will create the following directory structure if it is missing.
 
      ```
      c:\users\[username]\cmder_config
      ├───bin
-     └───config
-         └───profile.d
+     ├───config
+     │   └───profile.d
+     └───opt
      ```
 
+  - (optional) Place your own executable files and custom app folders into `%userprofile%\cmder_config\bin`.
+    - This folder to be injected into your PATH by default.
+    - See `/max_depth [1-5]` in 'Command Line Arguments for `init.bat`' table to add subdirectories recursively.
+  - (optional) Place your own custom app folders into the `%user_profile%\cmder_config\opt`.
+    - This folder will NOT be injected into your PATH so you have total control of what gets added.
+
+
 * Both the shared install and the individual user config locations can contain a full set of init and profile.d scripts enabling shared config with user overrides.  See below.
 
 ## Cmder.exe Command Line Arguments
@@ -50,6 +60,7 @@ The Cmder's user interface is also designed to be more eye pleasing, and you can
 | `/SINGLE`                 | Start Cmder in single mode.                                                              |
 | `/START [start_path]`     | Folder path to start in.                                                                 |
 | `/TASK [task_name]`       | Task to start after launch.                                                              |
+| `/X [ConEmu extras pars]` | Forwards parameters to ConEmu                                                             |
 
 ## Context Menu Integration
 
@@ -91,8 +102,8 @@ _(Some shortcuts are not yet documented, though they exist - please document the
 ### Access to multiple shells in one window using tabs
 You can open multiple tabs each containing one of the following shells:
 
-| Task                | Shell          | Description                                                                                                  |
-| ----                | -----          | -----------                                                                                                  |
+| Task                | Shell            | Description                                                                                                  |
+| ----                | -----            | -----------                                                                                                  |
 | Cmder               | `cmd.exe`        | Windows `cmd.exe` shell enhanced with Git, Git aware prompt, Clink (GNU Readline), and Aliases.              |
 | Cmder as Admin      | `cmd.exe`        | Administrative Windows `cmd.exe` Cmder shell.                                                                |
 | PowerShell          | `powershell.exe` | Windows PowerShell enhanced with Git and Git aware prompt .                                                  |
@@ -123,7 +134,27 @@ cd mintty-colors-solarized/
 echo source \$CMDER_ROOT/vendor/mintty-colors-solarized/mintty-solarized-dark.sh>>$CMDER_ROOT/config/user_profile.sh
 ```
 
-You may find some Monokai color schemes for mintty to match Cmder [here](https://github.com/PhilipDaniels/mintty/blob/master/themes/Monokai) or [here](https://github.com/oumu/mintty-color-schemes/blob/master/base16-monokai-mod.minttyrc).
+You may find some Monokai color schemes for mintty to match Cmder [here](https://github.com/oumu/mintty-color-schemes/blob/master/base16-monokai-mod.minttyrc).
+
+### Changing Cmder Default `cmd.exe` Prompt Config File
+
+The default Cmder shell `cmd::Cmder` prompt is customized using `Clink` and is configured by editing a config file that exists in one of two locations:
+
+- Single User Portable Config `%CMDER_ROOT%\config\cmder_prompt_config.lua`
+- Shared Cmder install with Non-Portable Individual User Config `%CMDER_USER_CONFIG%\cmder_prompt_config.lua`
+
+If your Cmder setup does not have this file create it from `%CMDER_ROOT%\vendor\cmder_prompt_config.lua.default`
+
+Customizations include:
+
+- Colors.
+- Single/Multi-line.
+- Full path/Folder only.
+- `[user]@[host]` to the beginning of the prompt.
+- `~` for home directory.
+- `λ` symbol
+
+Documentation is in the file for each setting.
 
 ### Changing Cmder Default `cmd.exe` Shell Startup Behaviour Using Task Arguments
 
@@ -146,13 +177,15 @@ You may find some Monokai color schemes for mintty to match Cmder [here](https:/
 | `/c [user cmder root]`          | Enables user bin and config folders for 'Cmder as admin' sessions due to non-shared environment.                                                   | not set                                |
 | `/d`                            | Enables debug output.                                                                                                                              | not set                                |
 | `/f`                            | Enables Cmder Fast Init Mode. This disables some features, see pull request [#1492](https://github.com/cmderdev/cmder/pull/1942) for more details. | not set                                |
+| `/t`                            | Enables Cmder Timed Init Mode. This displays the time taken run init scripts                                                                       | not set                                |
 | `/git_install_root [file path]` | User specified Git installation root path.                                                                                                         | `%CMDER_ROOT%\vendor\Git-for-Windows`  |
 | `/home [home folder]`           | User specified folder path to set `%HOME%` environment variable.                                                                                   | `%userprofile%`                        |
 | `/max_depth [1-5]`              | Define max recurse depth when adding to the path for `%cmder_root%\bin` and `%cmder_user_bin%`                                                     | 1                                      |
+| `/nix_tools [0-2]`              | Define how `*nix` tools are added to the path.  Prefer Windows Tools: 1, Prefer *nix Tools: 2, No `/usr/bin` in `%PATH%`: 0                        | 1                                      |
 | `/svn_ssh [path to ssh.exe]`    | Define `%SVN_SSH%` so we can use git svn with ssh svn repositories.                                                                                | `%GIT_INSTALL_ROOT%\bin\ssh.exe`       |
-| `/user_aliases [file path]`     | File path pointing to user aliases.                                                                                                                | `%CMDER_ROOT%\config\user-aliases.cmd` |
+| `/user_aliases [file path]`     | File path pointing to user aliases.                                                                                                                | `%CMDER_ROOT%\config\user_aliases.cmd` |
 | `/v`                            | Enables verbose output.                                                                                                                            | not set                                |
-| (custom arguments)              | User defined arguments processed by `cexec`. Type `cexec /?` for more useage.                                                                      | not set                                |
+| (custom arguments)              | User defined arguments processed by `cexec`. Type `cexec /?` for more usage.                                                                      | not set                                |
 
 ### Cmder Shell User Config
 Single user portable configuration is possible using the cmder specific shell config files.  Edit the below files to add your own configuration:
@@ -161,32 +194,46 @@ Single user portable configuration is possible using the cmder specific shell co
 | ------------- | ----------------------------------------- |
 | Cmder         | `%CMDER_ROOT%\config\user_profile.cmd`    |
 | PowerShell    | `$ENV:CMDER_ROOT\config\user_profile.ps1` |
-| Bash/Mintty   | `$CMDER_ROOT/config/user_profile.sh`        |
+| Bash/Mintty   | `$CMDER_ROOT/config/user_profile.sh`      |
 
 Note: Bash and Mintty sessions will also source the `$HOME/.bashrc` file if it exists after it sources `$CMDER_ROOT/config/user_profile.sh`.
 
 You can write `*.cmd|*.bat`, `*.ps1`, and `*.sh` scripts and just drop them in the `%CMDER_ROOT%\config\profile.d` folder to add startup config to Cmder.
 
-| Shell         | Cmder `Profile.d` Scripts                         |
-| ------------- | --------------------------------------------------|
-| Cmder         | `%CMDER_ROOT%\config\profile.d\*.bat and *.cmd` |
-| PowerShell    | `$ENV:CMDER_ROOT\config\profile.d\*.ps1`        |
-| Bash/Mintty   | `$CMDER_ROOT/config/profile.d/*.sh`                 |
+| Shell         | Cmder `Profile.d` Scripts                          |
+| ------------- | -------------------------------------------------- |
+| Cmder         | `%CMDER_ROOT%\config\profile.d\*.bat and *.cmd`    |
+| PowerShell    | `$ENV:CMDER_ROOT\config\profile.d\*.ps1`           |
+| Bash/Mintty   | `$CMDER_ROOT/config/profile.d/*.sh`                |
+
+#### Git Status Opt-Out
+
+ To disable Cmder prompt git status globally add the following to `~/.gitconfig` or locally for a single repo `[repo]/.git/config` and start a new session.
+
+ *Note: This configuration is not portable*
+
+ ```
+ [cmder]
+   status = false      # Opt out of Git status for 'ALL' Cmder supported shells.
+   cmdstatus = false   # Opt out of Git status for 'Cmd.exe' shells.
+   psstatus = false    # Opt out of Git status for 'Powershell.exe and 'Pwsh.exe' shells.
+   shstatus = false    # Opt out of Git status for 'bash.exe' shells.
+ ```
 
 ### Aliases
 #### Cmder(`Cmd.exe`) Aliases
 You can define simple aliases for `cmd.exe` sessions with a command like `alias name=command`.  Cmd.exe aliases support optional parameters through the `$1-9` or the `$*` special characters so the alias `vi=vim.exe $*` typed as `vi [filename]` will open `[filename]` in `vim.exe`.
 
-Cmd.exe aliases can also be more complex. See: [DOSKEY.EXE documentation](http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/doskey.mspx?mfr=true) for additional details on complex aliases/macros for `cmd.exe`
+Cmd.exe aliases can also be more complex. See: [DOSKEY.EXE documentation](https://docs.microsoft.com/en-us/windows-server/administration/windows-commands/doskey) for additional details on complex aliases/macros for `cmd.exe`
 
-Aliases defined using the `alias.bat` command will automatically be saved in the `%CMDER_ROOT%\config\user-aliases.cmd` file
+Aliases defined using the `alias.bat` command will automatically be saved in the `%CMDER_ROOT%\config\user_aliases.cmd` file
 
 To make an alias and/or any other profile settings permanent add it to one of the following:
 
 Note: These are loaded in this order by `$CMDER_ROOT/vendor/init.bat`.  Anything stored in `%CMDER_ROOT%` will be a portable setting and will follow cmder to another machine.
 
 * `%CMDER_ROOT%\config\profile.d\*.cmd` and `\*.bat`
-* `%CMDER_ROOT%\config\user-aliases.cmd`
+* `%CMDER_ROOT%\config\user_aliases.cmd`
 * `%CMDER_ROOT%\config\user_profile.cmd`
 
 #### Bash.exe|Mintty.exe Aliases
@@ -222,7 +269,7 @@ If you want to run SSH agent on startup, include the line `@call "%GIT_INSTALL_R
 
 Cmder is by default shipped with a vendored Git installation.  On each instance of launching Cmder, an attempt is made to locate any other user provided Git binaries. Upon finding a `git.exe` binary, Cmder further compares its version against the vendored one _by executing_ it. The vendored `git.exe` binary is _only_ used when it is more recent than the user-installed one.
 
-You may use your favorite version of Git by including its path in the `%PATH%` enviroment variable.  Moreover, the **Mini** edition of Cmder (found on the [downloads page](https://github.com/cmderdev/cmder/releases)) excludes any vendored Git binaries.
+You may use your favorite version of Git by including its path in the `%PATH%` environment variable.  Moreover, the **Mini** edition of Cmder (found on the [downloads page](https://github.com/cmderdev/cmder/releases)) excludes any vendored Git binaries.
 
 ### Using external Cygwin/Babun, MSys2, WSL, or Git for Windows SDK with Cmder.
 
@@ -311,11 +358,11 @@ For instructions on how to integrate Cmder with your IDE, please read our [Wiki
 
 The process of upgrading Cmder depends on the version/build you are currently running.
 
-If you have a `[cmder_root]/config/user-conemu.xml`, you are running a newer version of Cmder, follow the below process:
+If you have a `[cmder_root]/config/user[-|_]conemu.xml`, you are running a newer version of Cmder, follow the below process:
 
-1. Exit all Cmder sessions and relaunch `[cmder_root]/cmder.exe`, this backs up your existing `[cmder_root]/vendor/conemu-maximus5/conemu.xml` to `[cmder_root]/config/user-conemu.xml`.
+1. Exit all Cmder sessions and relaunch `[cmder_root]/cmder.exe`, this backs up your existing `[cmder_root]/vendor/conemu-maximus5/conemu.xml` to `[cmder_root]/config/user[-|_]conemu.xml`.
 
-   * The `[cmder_root]/config/user-conemu.xml` contains any custom settings you have made using the 'Setup Tasks' settings dialog.
+   * The `[cmder_root]/config/user[-|_]conemu.xml` contains any custom settings you have made using the 'Setup Tasks' settings dialog.
 
 2. Exit all Cmder sessions and backup any files you have manually edited under `[cmder_root]/vendor`.
 
@@ -324,9 +371,9 @@ If you have a `[cmder_root]/config/user-conemu.xml`, you are running a newer ver
 3.  Delete the `[cmder_root]/vendor` folder.
 4.  Extract the new `cmder.zip` or `cmder_mini.zip` into `[cmder_root]/` overwriting all files when prompted.
 
-If you do not have a `[cmder_root]/config/user-conemu.xml`, you are running an older version of cmder, follow the below process:
+If you do not have a `[cmder_root]/config/user[-|_]conemu.xml`, you are running an older version of cmder, follow the below process:
 
-1. Exit all Cmder sessions and backup `[cmder_root]/vendor/conemu-maximus5/conemu.xml` to `[cmder_root]/config/user-conemu.xml`.
+1. Exit all Cmder sessions and backup `[cmder_root]/vendor/conemu-maximus5/conemu.xml` to `[cmder_root]/config/user[-|_]conemu.xml`.
 
 2. Backup any files you have manually edited under `[cmder_root]/vendor`.
 

config/Readme.md

@@ -3,12 +3,14 @@
 All config files must be in this folder. If there is no option to set this folder 
 directly, it has to be hardlinked.
 
-* `user-aliases.cmd`: aliases in cmd; called from vendor\init.bat; autocreated from
-  `vendor\user-aliases.cmd.example`.
+* `user_aliases.cmd`: aliases in cmd; called from vendor\init.bat; autocreated from
+  `vendor\user_aliases.cmd.default`.
 * `*.lua`: clink completions and prompt filters; autoloaded after all
   prompt filter and clink completions are initialized; add your own.
-* `user-profile.{sh|cmd|ps1}`: startup files for bash|cmd|powershell tasks; called from their
-  respective startup scripts in `vendor\`; autocreated on first start of such a task.
+* `user_profile.{sh|cmd|ps1}`: startup files for bash|cmd|powershell tasks; called from their
+  respective startup scripts in `vendor\`; autocreated from
+  `vendor\user_profile.{sh|cmd|ps1}.default` on first start of such a task.
 * `.history`: the current commandline history; autoupdated on close.
 * `settings`: settings for readline; overwritten on update.
-* `ConEmu.xml`: settings from ConEmu (=the UI of cmder -> Preferences); overwritten on update.
+* `user-ConEmu.xml`: settings from ConEmu the UI of Cmder. ;
+  Do not edit this file directly it is overwritten on each cmder.exe launch.

config/profile.d/README.md

@@ -0,0 +1,3 @@
+## Profile.d Folder
+
+* Files in this folder named `*.{sh|cmd|ps1}`: Will be executed by the appropriate shell when starting the shell.

launcher/CmderLauncher.sln

@@ -9,12 +9,18 @@ Global
 	GlobalSection(SolutionConfigurationPlatforms) = preSolution
 		Debug|Win32 = Debug|Win32
 		Release|Win32 = Release|Win32
+		Debug|x64 = Debug|x64
+		Release|x64 = Release|x64
 	EndGlobalSection
 	GlobalSection(ProjectConfigurationPlatforms) = postSolution
 		{4A8485A5-B7DD-4C44-B7F6-3E2765DD0CD3}.Debug|Win32.ActiveCfg = Debug|Win32
 		{4A8485A5-B7DD-4C44-B7F6-3E2765DD0CD3}.Debug|Win32.Build.0 = Debug|Win32
 		{4A8485A5-B7DD-4C44-B7F6-3E2765DD0CD3}.Release|Win32.ActiveCfg = Release|Win32
 		{4A8485A5-B7DD-4C44-B7F6-3E2765DD0CD3}.Release|Win32.Build.0 = Release|Win32
+		{4A8485A5-B7DD-4C44-B7F6-3E2765DD0CD3}.Debug|x64.ActiveCfg = Debug|x64
+		{4A8485A5-B7DD-4C44-B7F6-3E2765DD0CD3}.Debug|x64.Build.0 = Debug|x64
+		{4A8485A5-B7DD-4C44-B7F6-3E2765DD0CD3}.Release|x64.ActiveCfg = Release|x64
+		{4A8485A5-B7DD-4C44-B7F6-3E2765DD0CD3}.Release|x64.Build.0 = Release|x64
 	EndGlobalSection
 	GlobalSection(SolutionProperties) = preSolution
 		HideSolutionNode = FALSE

launcher/CmderLauncher.vcxproj

@@ -9,6 +9,14 @@
       <Configuration>Release</Configuration>
       <Platform>Win32</Platform>
     </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
   </ItemGroup>
   <PropertyGroup Label="Globals">
     <ProjectGuid>{4A8485A5-B7DD-4C44-B7F6-3E2765DD0CD3}</ProjectGuid>
@@ -30,6 +38,19 @@
     <CharacterSet>Unicode</CharacterSet>
     <PlatformToolset>v141</PlatformToolset>
   </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>true</UseDebugLibraries>
+    <PlatformToolset>v141_xp</PlatformToolset>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+    <PlatformToolset>v141</PlatformToolset>
+  </PropertyGroup>
   <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
   <ImportGroup Label="ExtensionSettings">
   </ImportGroup>
@@ -39,6 +60,12 @@
   <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
     <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
   </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
   <PropertyGroup Label="UserMacros" />
   <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <LinkIncremental>true</LinkIncremental>
@@ -48,6 +75,14 @@
     <LinkIncremental>false</LinkIncremental>
     <TargetName>Cmder</TargetName>
   </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <LinkIncremental>true</LinkIncremental>
+    <TargetName>Cmder</TargetName>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <LinkIncremental>false</LinkIncremental>
+    <TargetName>Cmder</TargetName>
+  </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <ClCompile>
       <PrecompiledHeader>
@@ -94,6 +129,52 @@
       <Command>copy $(TargetPath) $(SolutionDir)..\$(TargetFileName)</Command>
     </PostBuildEvent>
   </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <ClCompile>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <WarningLevel>Level3</WarningLevel>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <SDLCheck>true</SDLCheck>
+    </ClCompile>
+    <Link>
+      <SubSystem>Windows</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+    </Link>
+    <Manifest>
+      <AdditionalManifestFiles>src/app.manifest %(AdditionalManifestFiles)</AdditionalManifestFiles>
+    </Manifest>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_USING_V110_SDK71_;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+    </ResourceCompile>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <Optimization>MinSpace</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <SDLCheck>true</SDLCheck>
+      <FavorSizeOrSpeed>Size</FavorSizeOrSpeed>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+    </ClCompile>
+    <Link>
+      <SubSystem>Windows</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+    </Link>
+    <Manifest>
+      <AdditionalManifestFiles>src/app.manifest %(AdditionalManifestFiles)</AdditionalManifestFiles>
+    </Manifest>
+    <PostBuildEvent>
+      <Command>copy $(TargetPath) $(SolutionDir)..\$(TargetFileName)</Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
   <ItemGroup>
     <ResourceCompile Include="src\Resource.rc">
       <FileType>RC</FileType>

launcher/src/CmderLauncher.cpp

@@ -20,6 +20,8 @@
 #define MB_TITLE L"Cmder Launcher"
 #define SHELL_MENU_REGISTRY_PATH_BACKGROUND L"Directory\\Background\\shell\\Cmder"
 #define SHELL_MENU_REGISTRY_PATH_LISTITEM L"Directory\\shell\\Cmder"
+#define SHELL_MENU_REGISTRY_DRIVE_PATH_BACKGROUND L"Drive\\Background\\shell\\Cmder"
+#define SHELL_MENU_REGISTRY_DRIVE_PATH_LISTITEM L"Drive\\shell\\Cmder"
 
 #define streqi(a, b) (_wcsicmp((a), (b)) == 0)
 
@@ -69,7 +71,7 @@ bool FileExists(const wchar_t * filePath)
 	return false;
 }
 
-void StartCmder(std::wstring  path = L"", bool is_single_mode = false, std::wstring taskName = L"", std::wstring cfgRoot = L"", bool use_user_cfg = true)
+void StartCmder(std::wstring  path = L"", bool is_single_mode = false, std::wstring taskName = L"", std::wstring iconPath = L"", std::wstring cfgRoot = L"", bool use_user_cfg = true, std::wstring conemu_args = L"")
 {
 #if USE_TASKBAR_API
 	wchar_t appId[MAX_PATH] = { 0 };
@@ -96,6 +98,7 @@ void StartCmder(std::wstring  path = L"", bool is_single_mode = false, std::wstr
 
 	std::wstring cmderStart = path;
 	std::wstring cmderTask = taskName;
+	std::wstring cmderConEmuArgs = conemu_args;
 
 	std::copy(cfgRoot.begin(), cfgRoot.end(), userConfigDirPath);
 	userConfigDirPath[cfgRoot.length()] = 0;
@@ -108,7 +111,15 @@ void StartCmder(std::wstring  path = L"", bool is_single_mode = false, std::wstr
 
 	PathRemoveFileSpec(exeDir);
 
-	PathCombine(icoPath, exeDir, L"icons\\cmder.ico");
+	if (PathFileExists(iconPath.c_str()))
+	{
+		std::copy(iconPath.begin(), iconPath.end(), icoPath);
+		icoPath[iconPath.length()] = 0;
+	}
+	else
+	{
+		PathCombine(icoPath, exeDir, L"icons\\cmder.ico");
+	}
 
 	PathCombine(configDirPath, exeDir, L"config");
 
@@ -239,7 +250,7 @@ void StartCmder(std::wstring  path = L"", bool is_single_mode = false, std::wstr
 				{
 					MessageBox(NULL,
 						(GetLastError() == ERROR_ACCESS_DENIED)
-						? L"Failed to copy conig/ConEmu-%COMPUTERNAME%.xml file to vendor/conemu-maximus5/ConEmu.xml! Access Denied."
+						? L"Failed to copy config/ConEmu-%COMPUTERNAME%.xml file to vendor/conemu-maximus5/ConEmu.xml! Access Denied."
 						: L"Failed to copy config/ConEmu-%COMPUTERNAME%.xml file to vendor/conemu-maximus5/ConEmu.xml!", MB_TITLE, MB_ICONSTOP);
 					exit(1);
 				}
@@ -389,6 +400,11 @@ void StartCmder(std::wstring  path = L"", bool is_single_mode = false, std::wstr
 		swprintf_s(args, L"%s  -loadcfgfile \"%s\"", args, userConEmuCfgPath);
 	}
 
+	if (!streqi(cmderConEmuArgs.c_str(), L""))
+	{
+		swprintf_s(args, L"%s %s", args, cmderConEmuArgs.c_str());
+	}
+
 	SetEnvironmentVariable(L"CMDER_ROOT", exeDir);
 	if (wcscmp(userConfigDirPath, configDirPath) != 0)
 	{
@@ -452,7 +468,7 @@ HKEY GetRootKey(std::wstring opt)
 	return root;
 }
 
-void RegisterShellMenu(std::wstring opt, wchar_t* keyBaseName, std::wstring cfgRoot = L"")
+void RegisterShellMenu(std::wstring opt, wchar_t* keyBaseName, std::wstring cfgRoot, bool single)
 {
 	wchar_t userConfigDirPath[MAX_PATH] = { 0 };
 
@@ -464,15 +480,22 @@ void RegisterShellMenu(std::wstring opt, wchar_t* keyBaseName, std::wstring cfgR
 	GetModuleFileName(NULL, exePath, sizeof(exePath));
 
 	wchar_t commandStr[MAX_PATH + 20] = { 0 };
+	wchar_t baseCommandStr[MAX_PATH + 20] = { 0 };
+	if (!single) {
+		swprintf_s(baseCommandStr, L"\"%s\"", exePath);
+	}
+	else {
+		swprintf_s(baseCommandStr, L"\"%s\" /single", exePath);
+	}
 
 	if (cfgRoot.length() == 0) // '/c [path]' was NOT specified
 	{
-		swprintf_s(commandStr, L"\"%s\" \"%%V\"", exePath);
+		swprintf_s(commandStr, L"%s \"%%V\"", baseCommandStr);
 	}
 	else {
 		std::copy(cfgRoot.begin(), cfgRoot.end(), userConfigDirPath);
 		userConfigDirPath[cfgRoot.length()] = 0;
-		swprintf_s(commandStr, L"\"%s\" /c \"%s\" \"%%V\"", exePath, userConfigDirPath);
+		swprintf_s(commandStr, L"%s /c \"%s\" \"%%V\"", baseCommandStr, userConfigDirPath);
 	}
 
 	// Now that we have `commandStr`, it's OK to change `exePath`...
@@ -517,7 +540,9 @@ struct cmderOptions
 	std::wstring cmderCfgRoot = L"";
 	std::wstring cmderStart = L"";
 	std::wstring cmderTask = L"";
+	std::wstring cmderIcon = L"";
 	std::wstring cmderRegScope = L"USER";
+	std::wstring cmderConEmuArgs = L"";
 	bool cmderSingle = false;
 	bool cmderUserCfg = true;
 	bool registerApp = false;
@@ -577,6 +602,11 @@ cmderOptions GetOption()
 				cmderOptions.cmderTask = szArgList[i + 1];
 				i++;
 			}
+			else if (_wcsicmp(L"/icon", szArgList[i]) == 0)
+			{
+				cmderOptions.cmderIcon = szArgList[i + 1];
+				i++;
+			}
 			else if (_wcsicmp(L"/single", szArgList[i]) == 0)
 			{
 				cmderOptions.cmderSingle = true;
@@ -611,6 +641,23 @@ cmderOptions GetOption()
 					}
 				}
 			}
+			/* Used for passing arguments to conemu prog */
+			else if (_wcsicmp(L"/x", szArgList[i]) == 0)
+			{
+				cmderOptions.cmderConEmuArgs = szArgList[i + 1];
+				i++;
+			}
+			/* Bare double dash, remaining commandline is for conemu */
+			else if (_wcsicmp(L"--", szArgList[i]) == 0)
+			{
+				std::wstring cmdline = std::wstring(GetCommandLineW());
+				auto doubledash = cmdline.find(L" -- ");
+				if (doubledash != std::string::npos)
+				{
+					cmderOptions.cmderConEmuArgs = cmdline.substr(doubledash + 4);
+				}
+				break;
+			}
 			else if (cmderOptions.cmderStart == L"")
 			{
 				int len = wcslen(szArgList[i]);
@@ -626,13 +673,13 @@ cmderOptions GetOption()
 				}
 				else
 				{
-					MessageBox(NULL, L"Unrecognized parameter.\n\nValid options:\n\n    /c [CMDER User Root Path]\n\n    /task [ConEmu Task Name]\n\n    [/start [Start in Path] | [Start in Path]]\n\n    /single\n\n    /m\n\nor\n\n    /register [USER | ALL]\n\nor\n\n    /unregister [USER | ALL]\n", MB_TITLE, MB_OK);
+					MessageBox(NULL, L"Unrecognized parameter.\n\nValid options:\n\n    /c [CMDER User Root Path]\n\n    /task [ConEmu Task Name]\n\n    /icon [CMDER Icon Path]\n\n    [/start [Start in Path] | [Start in Path]]\n\n    /single\n\n    /m\n\n    /x [ConEmu extra arguments]\n\nor\n\n    /register [USER | ALL]\n\nor\n\n    /unregister [USER | ALL]\n", MB_TITLE, MB_OK);
 					cmderOptions.error = true;
 				}
 			}
 			else
 			{
-				MessageBox(NULL, L"Unrecognized parameter.\n\nValid options:\n\n    /c [CMDER User Root Path]\n\n    /task [ConEmu Task Name]\n\n    [/start [Start in Path] | [Start in Path]]\n\n    /single\n\n    /m\n\nor\n\n    /register [USER | ALL]\n\nor\n\n    /unregister [USER | ALL]\n", MB_TITLE, MB_OK);
+				MessageBox(NULL, L"Unrecognized parameter.\n\nValid options:\n\n    /c [CMDER User Root Path]\n\n    /task [ConEmu Task Name]\n\n    /icon [CMDER Icon Path]\n\n    [/start [Start in Path] | [Start in Path]]\n\n    /single\n\n    /m\n\n    /x [ConEmu extra arguments]\n\nor\n\n    /register [USER | ALL]\n\nor\n\n    /unregister [USER | ALL]\n", MB_TITLE, MB_OK);
 				cmderOptions.error = true;
 			}
 		}
@@ -656,13 +703,17 @@ int APIENTRY _tWinMain(_In_ HINSTANCE hInstance,
 
 	if (cmderOptions.registerApp == true)
 	{
-		RegisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_PATH_BACKGROUND, cmderOptions.cmderCfgRoot);
-		RegisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_PATH_LISTITEM, cmderOptions.cmderCfgRoot);
+		RegisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_PATH_BACKGROUND, cmderOptions.cmderCfgRoot, cmderOptions.cmderSingle);
+		RegisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_PATH_LISTITEM, cmderOptions.cmderCfgRoot, cmderOptions.cmderSingle);
+		RegisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_DRIVE_PATH_BACKGROUND, cmderOptions.cmderCfgRoot, cmderOptions.cmderSingle);
+		RegisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_DRIVE_PATH_LISTITEM, cmderOptions.cmderCfgRoot, cmderOptions.cmderSingle);
 	}
 	else if (cmderOptions.unRegisterApp == true)
 	{
 		UnregisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_PATH_BACKGROUND);
 		UnregisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_PATH_LISTITEM);
+		UnregisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_DRIVE_PATH_BACKGROUND);
+		UnregisterShellMenu(cmderOptions.cmderRegScope, SHELL_MENU_REGISTRY_DRIVE_PATH_LISTITEM);
 	}
 	else if (cmderOptions.error == true)
 	{
@@ -670,7 +721,7 @@ int APIENTRY _tWinMain(_In_ HINSTANCE hInstance,
 	}
 	else
 	{
-		StartCmder(cmderOptions.cmderStart, cmderOptions.cmderSingle, cmderOptions.cmderTask, cmderOptions.cmderCfgRoot, cmderOptions.cmderUserCfg);
+		StartCmder(cmderOptions.cmderStart, cmderOptions.cmderSingle, cmderOptions.cmderTask, cmderOptions.cmderIcon, cmderOptions.cmderCfgRoot, cmderOptions.cmderUserCfg, cmderOptions.cmderConEmuArgs);
 	}
 
 	return 0;

opt/Readme.md

@@ -0,0 +1,5 @@
+## Bin
+
+This folder is for optional user packages and will not be automatically injected into the PATH.
+
+Use `%lib_path% enhance_path "%cmder_root%\[path to folder]"` in `%cmder_root%\config\user_profile.cmd` or `%cmder_root%\config\profile.d\*.cmd` to add to the path.

scripts/utils.ps1

@@ -31,7 +31,7 @@ function Extract-Archive($source, $target) {
     Write-Verbose $("Extracting Archive '$cmder_root\vendor\" + $source.replace('/','\') + " to '$cmder_root\vendor\$target'")
     Invoke-Expression "7z x -y -o`"$($target)`" `"$source`"  > `$null"
     if ($lastexitcode -ne 0) {
-        Write-Error "Extracting of $source failied"
+        Write-Error "Extracting of $source failed"
     }
     Remove-Item $source
 }
@@ -41,7 +41,7 @@ function Create-Archive($source, $target, $params) {
     Write-Verbose "Running: $command"
     Invoke-Expression $command
     if ($lastexitcode -ne 0) {
-        Write-Error "Compressing $source failied"
+        Write-Error "Compressing $source failed"
     }
 }
 

vendor/ConEmu.xml.default

@@ -549,14 +549,14 @@
 					<value name="GuiArgs" type="string" data=" /icon &quot;%CMDER_ROOT%\icons\cmder.ico&quot;"/>
 					<value name="Active" type="long" data="0"/>
 					<value name="Count" type="long" data="1"/>
-					<value name="Cmd1" type="string" data="*cmd /c &quot;&quot;%ConEmuDir%\..\git-for-windows\bin\bash&quot; --login -i&quot;"/>
+					<value name="Cmd1" type="string" data="*&quot;%ConEmuDir%\..\git-for-windows\usr\bin\bash.exe&quot; --login -i"/>
 				</key>
 				<key name="Task8" modified="2018-02-22 06:05:13" build="171109">
 					<value name="Name" type="string" data="{bash::bash}"/>
 					<value name="Flags" type="dword" data="00000000"/>
 					<value name="Hotkey" type="dword" data="00000000"/>
 					<value name="GuiArgs" type="string" data=" /icon &quot;%CMDER_ROOT%\icons\cmder.ico&quot;"/>
-					<value name="Cmd1" type="string" data="cmd /c &quot;&quot;%ConEmuDir%\..\git-for-windows\bin\bash&quot; --login -i&quot;"/>
+					<value name="Cmd1" type="string" data="&quot;%ConEmuDir%\..\git-for-windows\usr\bin\bash.exe&quot; --login -i"/>
 					<value name="Active" type="long" data="0"/>
 					<value name="Count" type="long" data="1"/>
 				</key>

vendor/bin/alias.cmd

@@ -22,10 +22,15 @@ goto parseargument
 
   if /i "%currentarg%" equ "/f" (
     set ALIASES=%~2
+    set _f=%~2
     shift
     goto :do_shift
   ) else if /i "%currentarg%" == "/reload" (
     goto :p_reload
+  ) else if "%currentarg%" equ "/H" (
+    goto :p_help
+  ) else if "%currentarg%" equ "/h" (
+    goto :p_help
   ) else if "%currentarg%" equ "/?" (
     goto :p_help
   ) else if /i "%currentarg%" equ "/d" (
@@ -48,6 +53,7 @@ goto parseargument
       set _x=%*
     )
   )
+
 rem #endregion parseargument
 
 if "%ALIASES%" neq "%CMDER_ROOT%\config\user_aliases.cmd" (
@@ -64,28 +70,28 @@ if "%ALIASES%" neq "%CMDER_ROOT%\config\user_aliases.cmd" (
 )
 
 :: validate alias
-for /f "delims== tokens=1,* usebackq" %%G in (`echo "%_x%"`) do (
+for /f "delims== tokens=1,* usebackq" %%G in (`echo "!_x!"`) do (
   set alias_name=%%G
   set alias_value=%%H
 )
 
 :: leading quotes added while validating
-set alias_name=%alias_name:~1%
+set alias_name=!alias_name:~1!
 
 :: trailing quotes added while validating
-set alias_value=%alias_value:~0,-1%
+set alias_value=!alias_value:~0,-1!
 
 ::remove spaces
 set _temp=%alias_name: =%
 
 if not ["%_temp%"] == ["%alias_name%"] (
-	echo Your alias name can not contain a space
-	endlocal
-	exit /b
+  echo Your alias name can not contain a space
+  endlocal
+  exit /b
 )
 
 :: replace already defined alias
-%WINDIR%\System32\findstr /b /v /i "%alias_name%=" "%ALIASES%" >> "%ALIASES%.tmp"
+%WINDIR%\System32\findstr /b /l /v /i "%alias_name%=" "%ALIASES%" >> "%ALIASES%.tmp"
 echo %alias_name%=%alias_value% >> "%ALIASES%.tmp" && type "%ALIASES%.tmp" > "%ALIASES%" & @del /f /q "%ALIASES%.tmp"
 doskey /macrofile="%ALIASES%"
 endlocal
@@ -93,7 +99,8 @@ exit /b
 
 :p_del
 set del_alias=%~1
-%WINDIR%\System32\findstr /b /v /i "%del_alias%=" "%ALIASES%" >> "%ALIASES%.tmp"
+
+%WINDIR%\System32\findstr /b /l /v /i "%del_alias%=" "%ALIASES%" >> "%ALIASES%.tmp"
 type "%ALIASES%".tmp > "%ALIASES%" & @del /f /q "%ALIASES%.tmp"
 doskey %del_alias%=
 doskey /macrofile="%ALIASES%"
@@ -111,21 +118,32 @@ exit /b
 :p_help
 echo.Usage:
 echo.
-echo.	alias [options] [alias=full command]
+echo.  alias [options] [alias=alias command]
 echo.
 echo.Options:
 echo.
-echo.     /d [alias]     Delete an [alias].
-echo.     /f [macrofile] Path to the [macrofile] you want to store the new alias in.
-echo.                    Default: %cmder_root%\config\user_aliases.cmd
-echo.     /reload        Reload the aliases file.  Can be used with /f argument.
-echo.                    Default: %cmder_root%\config\user_aliases.cmd
+echo.  Note: Options MUST precede the alias definition.
 echo.
-echo.	If alias is called with no parameters, it will display the list of existing aliases.
+echo.  /d [alias]     Delete an [alias].
+echo.  /f [macrofile] Path to the [macrofile] you want to store the new alias in.
+echo.                 Default: %cmder_root%\config\user_aliases.cmd
+echo.  /reload        Reload the aliases file.  Can be used with /f argument.
+echo.                 Default: %cmder_root%\config\user_aliases.cmd
 echo.
-echo.	In the command, you can use the following notations:
-echo.	$* allows the alias to assume all the parameters of the supplied command.
-echo.	$1-$9 Allows you to seperate parameter by number, much like %%1 in batch.
-echo.	$T is the command seperator, allowing you to string several commands together into one alias.
-echo.	For more information, read DOSKEY/?
+echo. If alias is called with no parameters, it will display the list of existing
+echo. aliases.
+echo.
+echo. In the alias command, you can use the following notations:
+echo.
+echo. ^^^^^^^^%% - %% signs in env vars must be escaped if preserving the variable
+echo.         in he alias is desired. Variables in aliases surrounded by double
+echo.         quotes only require '^^%%' vs '^^^^^^^^%%'
+echo. $*    - allows the alias to assume all the parameters of the supplied
+echo.         command.
+echo. $1-$9 - Allows you to separate parameter by number, much like %%1 in
+echo.         batch.
+echo. $T    - Command separator, allowing you to string several commands
+echo.         together into one alias.
+echo.
+echo. For more information, read DOSKEY /?
 exit /b

vendor/bin/cexec.cmd

@@ -1,5 +1,4 @@
 @echo off
-setlocal
 
 if "%~1" equ "" goto :wrongSyntax
 
@@ -8,6 +7,7 @@ if not defined CMDER_USER_FLAGS (
   set "CMDER_USER_FLAGS= "
 )
 
+
 set "feNot=false"
 goto :parseArgument
 
@@ -17,10 +17,8 @@ goto :parseArgument
 :parseArgument
 set "currenArgu=%~1"
 if /i "%currenArgu%" equ "/setPath" (
-  :: set %flag_exists% shortcut
-  endlocal
-  set "ccall=call %~dp0cexec.cmd"
-  set "cexec=%~dp0cexec.cmd"
+  set ccall=call "%~dp0cexec.cmd"
+  set cexec="%~dp0cexec.cmd"
 ) else if /i "%currenArgu%" == "/?" (
   goto :help
 ) else if /i "%currenArgu%" equ "/help" (
@@ -86,29 +84,29 @@ echo Usage:
 echo.
 echo cexec /setPath [NOT] flagName command/program [parameters]
 echo.
-echo   /setPath         Generate a global varibles %%ccall%% and  %%cexec%% for
+echo   /setPath         Generate a global variables %%ccall%% and  %%cexec%% for
 echo                    quicker use. Following arguments will be ignored.
 echo.
 echo   NOT              Specifies that cexec should carry out
 echo                    the command only if the flag is missing.
 echo.
-echo   /[flagName]      Specifies which flag name is to detect. It's recommand
+echo   /[flagName]      Specifies which flag name is to detect. It's recommended
 echo                    to use a pair of double quotation marks to wrap
 echo                    your flag name to avoid exceed expectation.
 echo.
 echo   command/program  Specifies the command to carry out if the
-echo                    argument name is detected. It's recommand to
+echo                    argument name is detected. It's recommended to
 echo                    use a pair of double quotation marks to
 echo                    wrap your command to avoid exceed expectation.
 echo.
 echo   parameters       These are the parameters passed to the command/program.
-echo                    It's recommand to use a pair of double quotation marks 
+echo                    It's recommended to use a pair of double quotation marks 
 echo                    to wrap your flag name to avoid exceed expectation.
 echo.
 echo Examples:
 echo.
 echo   These examples are expected to be written in %cmder_root%/config/user-profile.cmd
-echo   CExec evaluates the environment varible "CMDER_USER_FLAGS" and conditionally
+echo   CExec evaluates the environment variable "CMDER_USER_FLAGS" and conditionally
 echo   caries out actions based on flags that are passed.
 echo.
 echo   Case 1:

vendor/bin/cmder_diag.cmd

@@ -1,5 +1,29 @@
 @echo off
 
+(echo.
+echo ------------------------------------
+echo set
+echo ------------------------------------
+set
+
+echo.
+echo ------------------------------------
+echo where git
+echo ------------------------------------
+where git
+
+echo.
+echo ------------------------------------
+echo where clink
+echo ------------------------------------
+where clink
+
+echo.
+echo ------------------------------------
+echo systeminfo
+echo ------------------------------------
+systeminfo
+
 echo ------------------------------------
 echo dir "%cmder_root%"
 echo ------------------------------------
@@ -23,19 +47,15 @@ echo dir /s "%cmder_root%\config"
 echo ------------------------------------
 dir /s "%cmder_root%\config"
 
-echo.
-echo ------------------------------------
-echo set
-echo ------------------------------------
-set
-
-echo.
-echo ------------------------------------
-echo where git
-echo ------------------------------------
-where git
-
 echo.
 echo ------------------------------------
 echo Make sure you sanitize this output of private data prior to posting it online for review by the CMDER Team!
 echo ------------------------------------
+) > "%temp%\cmder_diag_cmd.log"
+
+type "%temp%\cmder_diag_cmd.log"
+
+echo.
+echo Above output was saved in "%temp%\cmder_diag_cmd.log"
+
+

vendor/bin/cmder_diag.ps1

@@ -1,39 +1,64 @@
-write-host ------------------------------------
-write-host get-childitem "$env:CMDER_ROOT"
-write-host ------------------------------------
-get-childitem "$env:CMDER_ROOT"
+if (test-path  $env:temp\cmder_diag_ps.log) {
+  remove-item $env:temp\cmder_diag_ps.log
+}
 
-write-host ''
-write-host ------------------------------------
-write-host get-childitem "$env:CMDER_ROOT/vendor"
-write-host ------------------------------------
-get-childitem "$env:CMDER_ROOT/vendor"
+$cmder_diag = {
+""
+"------------------------------------"
+"get-childitem env:"
+"------------------------------------"
+get-childitem env: | ft -autosize -wrap 2>&1
 
-write-host ''
-write-host ------------------------------------
-write-host get-childitem -s "$env:CMDER_ROOT/bin"
-write-host ------------------------------------
-get-childitem -s "$env:CMDER_ROOT/bin"
+""
+"------------------------------------"
+"get-command git -all -ErrorAction SilentlyContinue"
+"------------------------------------"
+get-command git -all -ErrorAction SilentlyContinue
 
-write-host ''
-write-host ------------------------------------
-write-host get-childitem -s "$env:CMDER_ROOT/config"
-write-host ------------------------------------
-get-childitem -s "$env:CMDER_ROOT/config"
+""
+"------------------------------------"
+"get-command clink -all -ErrorAction SilentlyContinue"
+"------------------------------------"
+get-command clink -all -ErrorAction SilentlyContinue
 
-write-host ''
-write-host ------------------------------------
-write-host get-childitem env:
-write-host ------------------------------------
-get-childitem env: |ft -autosize -wrap
+""
+"------------------------------------"
+"systeminfo"
+"------------------------------------"
+systeminfo 2>&1
 
-write-host ''
-write-host ------------------------------------
-write-host get-command git
-write-host ------------------------------------
-get-command git
+"------------------------------------"
+"get-childitem '$env:CMDER_ROOT'"
+"------------------------------------"
+get-childitem "$env:CMDER_ROOT" |ft LastWriteTime,mode,length,FullName
 
-write-host ''
-write-host ------------------------------------
-write-host Make sure you sanitize this output of private data prior to posting it online for review by the CMDER Team!
-write-host ------------------------------------
+""
+"------------------------------------"
+"get-childitem '$env:CMDER_ROOT/vendor'"
+"------------------------------------"
+get-childitem "$env:CMDER_ROOT/vendor" |ft LastWriteTime,mode,length,FullName
+
+""
+"------------------------------------"
+"get-childitem -s '$env:CMDER_ROOT/bin'"
+"------------------------------------"
+get-childitem -s "$env:CMDER_ROOT/bin" |ft LastWriteTime,mode,length,FullName
+
+""
+"------------------------------------"
+"get-childitem -s '$env:CMDER_ROOT/config'"
+"------------------------------------"
+get-childitem -s "$env:CMDER_ROOT/config" |ft LastWriteTime,mode,length,FullName
+
+""
+"------------------------------------"
+"Make sure you sanitize this output of private data prior to posting it online for review by the CMDER Team!"
+"------------------------------------"
+}
+
+& $cmder_diag | out-file -filePath $env:temp\cmder_diag_ps.log
+
+get-content "$env:temp\cmder_diag_ps.log"
+
+write-host ""
+write-host Above output was saved in "$env:temp\cmder_diag_ps.log"

vendor/bin/cmder_diag.sh

@@ -1,39 +1,61 @@
-echo ------------------------------------
-echo ls -la "$CMDER_ROOT"
-echo ------------------------------------
-ls -la "$CMDER_ROOT"
+#!/usr/bin/env bash
 
-echo ''
-echo ------------------------------------
-echo ls -la "$CMDER_ROOT/vendor"
-echo ------------------------------------
-ls -la "$CMDER_ROOT/vendor"
+[[ -f "$TEMP/cmder_diag_sh.log" ]] && rm -f  "$TEMP/cmder_diag_sh.log"
 
-echo ''
-echo ------------------------------------
-echo ls -la /s "$CMDER_ROOT/bin"
-echo ------------------------------------
-ls -laR /s "$CMDER_ROOT/bin"
-
-echo ''
-echo ------------------------------------
-echo ls -la /s "$CMDER_ROOT/config"
-echo ------------------------------------
-ls -laR /s "$CMDER_ROOT/config"
-
-echo ''
+(echo ''
 echo ------------------------------------
 echo env
 echo ------------------------------------
-env
+env 2>&1
 
 echo ''
 echo ------------------------------------
 echo which git
 echo ------------------------------------
-which git
+which git 2>&1
+
+echo ''
+echo ------------------------------------
+echo which clink
+echo ------------------------------------
+which clink 2>&1
+
+echo ''
+echo ------------------------------------
+echo systeminfo
+echo ------------------------------------
+systeminfo 2>&1
+
+echo ------------------------------------
+echo ls -la "$CMDER_ROOT"
+echo ------------------------------------
+ls -la "$CMDER_ROOT" 2>&1
+
+echo ''
+echo ------------------------------------
+echo ls -la "$CMDER_ROOT/vendor"
+echo ------------------------------------
+ls -la "$CMDER_ROOT/vendor" 2>&1
+
+echo ''
+echo ------------------------------------
+echo ls -la /s "$CMDER_ROOT/bin"
+echo ------------------------------------
+ls -laR /s "$CMDER_ROOT/bin" 2>&1
+
+echo ''
+echo ------------------------------------
+echo ls -la /s "$CMDER_ROOT/config"
+echo ------------------------------------
+ls -laR /s "$CMDER_ROOT/config" 2>&1
 
 echo ''
 echo ------------------------------------
 echo Make sure you sanitize this output of private data prior to posting it online for review by the CMDER Team!
 echo ------------------------------------
+) > "$TEMP/cmder_diag_sh.log"
+
+cat "$TEMP/cmder_diag_sh.log"
+
+echo ''
+echo Above output was saved in "$TEMP/cmder_diag_sh.log"

vendor/bin/vscode_init.cmd

@@ -0,0 +1,31 @@
+@echo off
+
+rem Find root dir
+
+if not defined CMDER_ROOT (
+    for /f "delims=" %%i in ("%~dp0\..\..") do (
+        set "cmder_root=%%~fi"
+    )
+)
+
+if defined cmder_user_bin (
+    set CMDER_VSCODE_INIT_ARGS=%cmder_user_bin%\vscode_init_args.cmd
+) else (
+    set CMDER_VSCODE_INIT_ARGS=%CMDER_ROOT%\bin\vscode_init_args.cmd
+)
+
+if not exist "%CMDER_VSCODE_INIT_ARGS%" (
+    echo Creating initial "%CMDER_VSCODE_INIT_ARGS%"...
+    copy "%CMDER_ROOT%\vendor\bin\vscode_init_args.cmd.default" "%CMDER_VSCODE_INIT_ARGS%"
+) else (
+    call "%CMDER_VSCODE_INIT_ARGS%"
+)
+
+IF [%1] == [] (
+    REM -- manually opened console (Ctrl + Shift + `) --
+    CALL "%~dp0..\init.bat"
+) ELSE (
+    REM -- task --
+    CALL cmd %*
+    exit
+)

vendor/bin/vscode_init_args.cmd.default

@@ -0,0 +1,58 @@
+@echo off
+
+rem Below are the default Cmder session settings:
+rem
+rem See "%CMDER_ROOT%\README.md" for details on these settings.
+rem
+rem `Cmder.exe` Arguments:
+rem ----------------------
+rem 
+rem `/c [cmder_user_cfg_root]
+rem set cmder_user_bin=[cmder_user_cfg_root]\bin
+rem set cmder_user_config=[cmder_user_cfg_root]\config
+rem
+rem `init.bat` Arguments
+rem --------------------
+rem
+rem `/d`
+rem debug_output=0
+rem
+rem `/v`
+rem verbose_output=0
+rem
+rem `/f`
+rem fast_init=0
+rem
+rem `/nix_tools`
+rem nix_tools=1
+rem
+rem `/t`
+rem time_init=0
+rem
+rem `/max_depth`
+rem max_depth=1
+rem
+rem `/user_aliases`
+rem user_aliases=
+rem
+rem `/git_install_root`
+rem GIT_INSTALL_ROOT=
+rem
+rem `/home`
+rem HOME=
+rem
+rem `/svn_ssh`
+rem SVN_SSH=
+
+echo Applying Cmder VSCode settings from '%~0'...
+
+if defined CMDER_CONFIGURED (
+    rem Set Cmder settings here for when VSCode is launched inside Cmder.
+    set verbose_output=1
+) else (
+    rem Set Cmder settings here for when VSCode is launched from outside Cmder.
+    set verbose_output=1
+)
+
+rem Set all required Cmder VSCode terminal environment settings above this line.
+echo Applying Cmder VSCode settings is complete!

vendor/clink.lua

@@ -13,6 +13,82 @@ dofile(clink_lua_file)
 
 -- now add our own things...
 
+
+local function get_uah_color()
+  return uah_color or "\x1b[1;33;40m" -- Green = uah = [user]@[hostname]
+end
+
+local function get_cwd_color()
+  return cwd_color or "\x1b[1;32;40m" -- Yellow cwd = Current Working Directory
+end
+
+local function get_lamb_color()
+  return lamb_color or "\x1b[1;30;40m" -- Light Grey = Lambda Color
+end
+
+
+local function get_clean_color()
+  return clean_color or "\x1b[1;37;40m"
+end
+
+
+local function get_dirty_color()
+  return dirty_color or "\x1b[33;3m"
+end
+
+
+local function get_conflict_color()
+  return conflict_color or "\x1b[31;1m"
+end
+
+local function get_unknown_color()
+  return unknown_color or "\x1b[37;1m"
+end
+
+---
+-- Makes a string safe to use as the replacement in string.gsub
+---
+local function verbatim(s)
+    s = string.gsub(s, "%%", "%%%%")
+    return s
+end
+
+-- Extracts only the folder name from the input Path
+-- Ex: Input C:\Windows\System32 returns System32
+---
+local function get_folder_name(path)
+  local reversePath = string.reverse(path)
+  local slashIndex = string.find(reversePath, "\\")
+  return string.sub(path, string.len(path) - slashIndex + 2)
+end
+
+
+---
+-- Forward/backward compatibility for Clink asynchronous prompt filtering.
+-- With Clink v1.2.10 and higher this lets git status run in the background and
+-- refresh the prompt when it finishes, to eliminate waits in large git repos.
+---
+local io_popenyield
+local clink_promptcoroutine
+local cached_info = {}
+if clink.promptcoroutine and io.popenyield then
+    io_popenyield = io.popenyield
+    clink_promptcoroutine = clink.promptcoroutine
+else
+    io_popenyield = io.popen
+    clink_promptcoroutine = function (func)
+        return func(false)
+    end
+end
+
+
+---
+-- Global variable so other Lua scripts can detect whether they're in a Cmder
+-- shell session.
+---
+CMDER_SESSION = true
+
+
 ---
 -- Setting the prompt in clink means that commands which rewrite the prompt do
 -- not destroy our own prompt. It also means that started cmds (or batch files
@@ -36,18 +112,67 @@ local function set_prompt_filter()
     -- also check for square brackets
     if env == nil then env = old_prompt:match('.*%[([^%]]+)%].+:') end
 
-    -- build our own prompt
-    -- orig: $E[1;32;40m$P$S{git}{hg}$S$_$E[1;30;40m{lamb}$S$E[0m
-    -- color codes: "\x1b[1;37;40m"
-    local cmder_prompt = "\x1b[1;32;40m{cwd} {git}{hg}{svn} \n\x1b[1;39;40m{lamb} \x1b[0m"
-    local lambda = "λ"
-    cwd = string.gsub(cwd, "%%", "{percent}")
-    cmder_prompt = string.gsub(cmder_prompt, "{cwd}", cwd)
-
-    if env ~= nil then
-        lambda = "("..env..") "..lambda
+    -- Much of the below was 'borrowed' from https://github.com/AmrEldib/cmder-powerline-prompt
+    -- Symbol displayed for the home dir in the prompt.
+    if not prompt_homeSymbol then
+      prompt_homeSymbol = "~"
     end
-    clink.prompt.value = string.gsub(cmder_prompt, "{lamb}", lambda)
+
+    -- Symbol displayed in the new line below the prompt.
+    if not prompt_lambSymbol then
+      prompt_lambSymbol = "λ"
+    end
+
+    if not prompt_type then
+      prompt_type = "full"
+    end
+
+    if prompt_useHomeSymbol == nil then
+      prompt_useHomeSymbol = false
+    end
+
+    if prompt_useUserAtHost == nil then
+      prompt_useUserAtHost = false
+    end
+
+    if prompt_singleLine == nil then
+      prompt_singleLine = false
+    end
+
+    if prompt_includeVersionControl == nil then
+      prompt_includeVersionControl = true
+    end
+
+    if prompt_type == 'folder' then
+        cwd = get_folder_name(cwd)
+    end
+
+    if prompt_useHomeSymbol and string.find(cwd, clink.get_env("HOME")) then
+        cwd = string.gsub(cwd, clink.get_env("HOME"), prompt_homeSymbol)
+    end
+
+    uah = ''
+    if prompt_useUserAtHost then
+        uah = clink.get_env("USERNAME") .. "@" .. clink.get_env("COMPUTERNAME") .. ' '
+    end
+
+    cr = "\n"
+    if prompt_singleLine then
+      cr = ' '
+    end
+
+    if env ~= nil then env = "("..env..") " else env = "" end
+
+    if uah ~= '' then uah = get_uah_color() .. uah end
+    if cwd ~= '' then cwd = get_cwd_color() .. cwd end
+
+    local version_control = prompt_includeVersionControl and "{git}{hg}{svn}" or ""
+
+    prompt = "{uah}{cwd}" .. version_control .. get_lamb_color() .. cr .. "{env}{lamb} \x1b[0m"
+    prompt = string.gsub(prompt, "{uah}", uah)
+    prompt = string.gsub(prompt, "{cwd}", cwd)
+    prompt = string.gsub(prompt, "{env}", env)
+    clink.prompt.value = string.gsub(prompt, "{lamb}", prompt_lambSymbol)
 end
 
 local function percent_prompt_filter()
@@ -182,12 +307,15 @@ end
 -- @return {false|mercurial branch name}
 ---
 local function get_hg_branch()
-    for line in io.popen("hg branch 2>nul"):lines() do
+    local file = io.popen("hg branch 2>nul")
+    for line in file:lines() do
         local m = line:match("(.+)$")
         if m then
+            file:close()
             return m
         end
     end
+    file:close()
 
     return false
 end
@@ -197,43 +325,41 @@ end
 -- @return {false|svn branch name}
 ---
 local function get_svn_branch(svn_dir)
-    for line in io.popen("svn info 2>nul"):lines() do
+    local file = io.popen("svn info 2>nul")
+    for line in file:lines() do
         local m = line:match("^Relative URL:")
         if m then
+            file:close()
             return line:sub(line:find("/")+1,line:len())
         end
     end
+    file:close()
 
     return false
 end
 
 ---
--- Get the status of working dir
--- @return {bool}
+-- Get the status and conflict status of working dir
+-- @return {bool <status>, bool <is_conflict>}
 ---
 local function get_git_status()
-    local file = io.popen("git --no-optional-locks status --porcelain 2>nul")
+    local file = io_popenyield("git --no-optional-locks status --porcelain 2>nul")
+    local conflict_found = false
+    local is_status = true
     for line in file:lines() do
-        file:close()
-        return false
+        local code = line:sub(1, 2)
+        -- print (string.format("code: %s, line: %s", code, line))
+        if code == "DD" or code == "AU" or code == "UD" or code == "UA" or code == "DU" or code == "AA" or code == "UU" then
+          is_status = false
+          conflict_found = true
+          break
+        -- unversioned files are ignored, comment out 'code ~= "!!"' to unignore them
+        elseif code ~= "!!" and code ~= "??" then
+          is_status = false
+        end
     end
     file:close()
-
-    return true
-end
-
----
--- Gets the conflict status
--- @return {bool} indicating true for conflict, false for no conflicts
----
-function get_git_conflict()
-    local file = io.popen("git diff --name-only --diff-filter=U 2>nul")
-    for line in file:lines() do
-        file:close()
-        return true;
-    end
-    file:close()
-    return false
+    return { status = is_status, conflict = conflict_found }
 end
 
 
@@ -267,35 +393,108 @@ local function get_svn_status()
     return true
 end
 
+---
+-- Use a prompt coroutine to get git status in the background.
+-- Cache the info so we can reuse it next time to reduce flicker.
+---
+local function get_git_info_table()
+    local info = clink_promptcoroutine(function ()
+        return get_git_status()
+    end)
+    if not info then
+        info = cached_info.git_info or {}
+    else
+        cached_info.git_info = info
+    end
+    return info
+end
+
+---
+-- Get the status of working dir
+-- @return {bool}
+---
+local function get_git_status_setting()
+    -- When async prompt filtering is available, check the
+    -- prompt_overrideGitStatusOptIn config setting for whether to ignore the
+    -- cmder.status and cmder.cmdstatus git config opt-in settings.
+    if clink.promptcoroutine and io.popenyield and settings.get("prompt.async") then
+        if prompt_overrideGitStatusOptIn then
+            return true
+        end
+    end
+
+    local gitStatusConfig = io.popen("git --no-pager config cmder.status 2>nul")
+
+    for line in gitStatusConfig:lines() do
+        if string.match(line, 'false') then
+          gitStatusConfig:close()
+          return false
+        end
+    end
+
+    local gitCmdStatusConfig = io.popen("git --no-pager config cmder.cmdstatus 2>nul")
+    for line in gitCmdStatusConfig:lines() do
+        if string.match(line, 'false') then
+          gitCmdStatusConfig:close()
+          return false
+        end
+    end
+    gitStatusConfig:close()
+    gitCmdStatusConfig:close()
+
+    return true
+end
+
 local function git_prompt_filter()
 
+    -- Don't do any git processing if the prompt doesn't want to show git info.
+    if not clink.prompt.value:find("{git}") then
+        return false
+    end
+
     -- Colors for git status
     local colors = {
-        clean = "\x1b[1;37;40m",
-        dirty = "\x1b[33;3m",
-        conflict = "\x1b[31;1m"
+        clean = get_clean_color(),
+        dirty = get_dirty_color(),
+        conflict = get_conflict_color(),
+        nostatus = get_unknown_color()
     }
 
     local git_dir = get_git_dir()
+    local color
+    cmderGitStatusOptIn = get_git_status_setting()
     if git_dir then
-        -- if we're inside of git repo then try to detect current branch
         local branch = get_git_branch(git_dir)
-        local color
         if branch then
-            -- Has branch => therefore it is a git folder, now figure out status
-            local gitStatus = get_git_status()
-            local gitConflict = get_git_conflict()
-
-            color = colors.dirty
-            if gitStatus then
-                color = colors.clean
+            -- If in a different repo or branch than last time, discard cached info.
+            if cached_info.git_dir ~= git_dir or cached_info.git_branch ~= branch then
+                cached_info.git_info = nil
+                cached_info.git_dir = git_dir
+                cached_info.git_branch = branch
             end
+            -- Use git status if allowed.
+            if cmderGitStatusOptIn then
+                -- if we're inside of git repo then try to detect current branch
+                -- Has branch => therefore it is a git folder, now figure out status
+                local gitInfo = get_git_info_table()
+                local gitStatus = gitInfo.status
+                local gitConflict = gitInfo.conflict
 
-            if gitConflict then
-                color = colors.conflict
+                if gitStatus == nil then
+                    color = colors.nostatus
+                elseif gitStatus then
+                    color = colors.clean
+                else
+                    color = colors.dirty
+                end
+
+                if gitConflict then
+                    color = colors.conflict
+                end
+            else
+                color = colors.nostatus
             end
-
-            clink.prompt.value = string.gsub(clink.prompt.value, "{git}", color.."("..branch..")")
+            clink.prompt.value = string.gsub(clink.prompt.value, "{git}", color.."("..verbatim(branch)..")")
             return false
         end
     end
@@ -307,48 +506,61 @@ end
 
 local function hg_prompt_filter()
 
+    -- Don't do any hg processing if the prompt doesn't want to show hg info.
+    if not clink.prompt.value:find("{hg}") then
+        return false
+    end
+
     local result = ""
 
     local hg_dir = get_hg_dir()
     if hg_dir then
         -- Colors for mercurial status
         local colors = {
-            clean = "\x1b[1;37;40m",
-            dirty = "\x1b[31;1m",
+            clean = get_clean_color(),
+            dirty = get_dirty_color(),
+            nostatus = get_unknown_color()
         }
 
-        -- 'hg id' gives us BOTH the branch name AND an indicator that there
-        -- are uncommitted changes, in one fast(er) call
-        local pipe = io.popen("hg id 2>&1")
+        local pipe = io.popen("hg branch 2>&1")
         local output = pipe:read('*all')
         local rc = { pipe:close() }
 
-        if output ~= nil and
-           string.sub(output,1,7) ~= "abort: " and             -- not an HG working copy
-           string.sub(output,1,12) ~= "000000000000" and       -- empty wc (needs update)
-           (not string.find(output, "is not recognized")) then -- 'hg' not in path
+        -- strip the trailing newline from the branch name
+        local n = #output
+        while n > 0 and output:find("^%s", n) do n = n - 1 end
+        local branch = output:sub(1, n)
+
+        if branch ~= nil and
+           string.sub(branch,1,7) ~= "abort: " and             -- not an HG working copy
+           (not string.find(branch, "is not recognized")) then -- 'hg' not in path
             local color = colors.clean
-            -- split elements on space delimiter
-            local items = {}
-            for i in string.gmatch(output, "%S+") do
-                table.insert(items, i)
-            end
-            -- if the repo hash ends with '+', the wc has uncommitted changes
-            if string.sub(items[1], -1, -1) == "+" then color = colors.dirty end
-            -- substitute the branch in directly -- already WITH parentheses.  :)
-            result = color .. items[2] -- string.sub(items[2], 1, string.len(items[2]) - 1)
+
+            local pipe = io.popen("hg status -amrd 2>&1")
+            local output = pipe:read('*all')
+            local rc = { pipe:close() }
+
+            if output ~= nil and output ~= "" then color = colors.dirty end
+            result = color .. "(" .. branch .. ")"
         end
     end
 
-    clink.prompt.value = string.gsub(clink.prompt.value, "{hg}", result)
+    clink.prompt.value = string.gsub(clink.prompt.value, "{hg}", verbatim(result))
     return false
 end
 
 local function svn_prompt_filter()
+
+    -- Don't do any svn processing if the prompt doesn't want to show svn info.
+    if not clink.prompt.value:find("{svn}") then
+        return false
+    end
+
     -- Colors for svn status
     local colors = {
-        clean = "\x1b[1;37;40m",
-        dirty = "\x1b[31;1m",
+        clean = get_clean_color(),
+        dirty = get_dirty_color(),
+        nostatus = get_unknown_color()
     }
 
     if get_svn_dir() then
@@ -362,7 +574,7 @@ local function svn_prompt_filter()
                 color = colors.dirty
             end
 
-            clink.prompt.value = string.gsub(clink.prompt.value, "{svn}", color.."("..branch..")")
+            clink.prompt.value = string.gsub(clink.prompt.value, "{svn}", color.."("..verbatim(branch)..")")
             return false
         end
     end
@@ -380,6 +592,8 @@ clink.prompt.register_filter(svn_prompt_filter, 50)
 clink.prompt.register_filter(percent_prompt_filter, 51)
 
 local completions_dir = clink.get_env('CMDER_ROOT')..'/vendor/clink-completions/'
+-- Execute '.init.lua' first to ensure package.path is set properly
+dofile(completions_dir..'.init.lua')
 for _,lua_module in ipairs(clink.find_files(completions_dir..'*.lua')) do
     -- Skip files that starts with _. This could be useful if some files should be ignored
     if not string.match(lua_module, '^_.*') then

vendor/clink_settings.default

@@ -0,0 +1,19 @@
+# For explanation of these and other settings see:
+# https://chrisant996.github.io/clink/clink.html
+
+# name: Sets how command history expansion is applied
+# type: enum
+# options: off,on,not_squoted,not_dquoted,not_quoted
+history.expand_mode = not_dquoted
+
+# name: Skip adding lines prefixed with whitespace
+# type: boolean
+history.ignore_space = False
+
+# name: The number of history lines to save
+# type: integer
+history.max_lines = 10000
+
+# name: Share history between instances
+# type: boolean
+history.shared = True

vendor/cmder.sh

@@ -42,10 +42,10 @@ elif [ -d "${CMDER_ROOT}/vendor/git-for-windows" ] ; then
 fi
 
 if [[ ! "$PATH" =~ "${GIT_INSTALL_ROOT}/bin:" ]] ; then
-  PATH=${GIT_INSTALL_ROOT}/bin:$PATH
+  PATH="${GIT_INSTALL_ROOT}/bin:$PATH"
 fi
 
-PATH=${CMDER_ROOT}/bin:${CMDER_ROOT}/vendor/bin:$PATH:${CMDER_ROOT}
+PATH="${CMDER_ROOT}/bin:${CMDER_ROOT}/vendor/bin:$PATH:${CMDER_ROOT}"
 
 export PATH
 
@@ -80,7 +80,7 @@ if [ "${CMDER_USER_CONFIG}" != "" ] ; then
     mv "$CMDER_USER_CONFIG/user-profile.sh" "$CMDER_USER_CONFIG/user_profile.sh"
   fi
 
-  export PATH=${CMDER_USER_CONFIG}/bin:$PATH
+  export PATH="${CMDER_USER_CONFIG}/bin:$PATH"
 
   CmderUserProfilePath="${CMDER_USER_CONFIG}/user_profile.sh"
   if [ -f "${CMDER_USER_CONFIG}/user_profile.sh" ] ; then
@@ -90,12 +90,7 @@ fi
 
 if [ ! -f "${CmderUserProfilePath}" ] ; then
     echo Creating user startup file: "${CmderUserProfilePath}"
-    cat <<-eof >"${CmderUserProfilePath}"
-# use this file to run your own startup commands for msys2 bash'
-
-# To add a new vendor to the path, do something like:
-# export PATH=\${CMDER_ROOT}/vendor/whatever:\${PATH}
-eof
+    cp "${CMDER_ROOT}/vendor/user_profile.sh.default" "${CmderUserProfilePath}"
 fi
 
 # Source the users .bashrc file if it exists

vendor/cmder_exinit

@@ -10,7 +10,7 @@
 # zsh  - Copy to /etc/profile.d/cmder_exinit.zsh
 # Add portable user customizations ${CMDER_ROOT}/config/user-profile.sh or
 # add whole config scripts to ${CMDER_ROOT}/config/profile.d both will be sourced
-# from mthis file and be appied to the environment at startup.
+# from this file and be applied to the environment at startup.
 #
 # These customizations will follow Cmder if $CMDER_ROOT is copied
 # to another machine.
@@ -108,11 +108,6 @@ if [ ! "$CMDER_ROOT" = "" ] ; then
 
   if [ ! -f "${CmderUserProfilePath}" ] ; then
       echo Creating user startup file: "${CmderUserProfilePath}"
-      cat <<-eof >"${CmderUserProfilePath}"
-# use this file to run your own startup commands for msys2 bash'
-
-# To add a new vendor to the path, do something like:
-# export PATH=\${CMDER_ROOT}/vendor/whatever:\${PATH}
-eof
+      cp "${CMDER_ROOT}/vendor/user_profile.sh.default" "${CmderUserProfilePath}"
   fi
 fi

vendor/cmder_prompt_config.lua.default

@@ -0,0 +1,55 @@
+-- All of the below was 'borrowed' from https://github.com/AmrEldib/cmder-powerline-prompt
+
+--- REQUIRED. config_prompt_type is whether the displayed prompt is the full path or only the folder name
+ -- Use:
+ -- "full" for full path like C:\Windows\System32
+ -- "folder" for folder name only like System32
+ -- default is full
+prompt_type = "full"
+
+--- REQUIRED. config_prompt_useHomeSymbol is whether to show ~ instead of the full path to the user's home folder
+ -- Use true or false
+ -- default is false
+prompt_useHomeSymbol = false
+
+-- Symbols
+-- REQUIRED. Prompt displayed instead of user's home folder e.g. C:\Users\username
+ -- default is '~'
+prompt_homeSymbol = "~"
+
+-- REQUIRED. Symbol displayed in the new line below the prompt.
+ -- default is 'λ'
+prompt_lambSymbol = "λ"
+
+-- REQUIRED. Adds [user]@[host] to the beginning of the prompt like bash
+ -- default is false
+prompt_useUserAtHost = false
+
+-- REQUIRED. If true prompt is a single line instead of default two line prompt.
+ -- default is false
+prompt_singleLine = false
+
+-- OPTIONAL. If true then always ignore the cmder.status and cmder.cmdstatus git config settings and run the git prompt commands in the background.
+ -- default is false
+ -- NOTE: This only takes effect if using Clink v1.2.10 or higher.
+prompt_overrideGitStatusOptIn = false
+
+-- OPTIONAL. If true then Cmder includes git, mercurial, and subversion status in the prompt.
+ -- default is true
+prompt_includeVersionControl = true
+
+-- Prompt Attributes
+--
+-- Colors
+-- Green:      "\x1b[1;33;40m"
+-- Yellow:     "\x1b[1;32;40m"
+-- Light Grey: "\x1b[1;30;40m"
+
+-- Prompt Element Colors
+uah_color = "\x1b[1;33;40m" -- Green = uah = [user]@[hostname]
+cwd_color = "\x1b[1;32;40m" -- Yellow cwd = Current Working Directory
+lamb_color = "\x1b[1;30;40m" -- Light Grey = Lambda Color
+clean_color = "\x1b[1;37;40m"
+dirty_color = "\x1b[33;3m"
+conflict_color = "\x1b[31;1m"
+unknown_color = "\x1b[37;1m" -- White = No VCS Status Branch Color

vendor/git-for-windows_1.29.1

@@ -0,0 +1 @@
+../../../dtgam/bin/git-2.29.0

vendor/git-prompt.sh

@@ -1,3 +1,29 @@
+function getGitStatusSetting() {
+  gitStatusSetting=$(git --no-pager config -l 2>/dev/null)  
+
+  if [[ -n ${gitStatusSetting} ]] && [[ ${gitStatusSetting} =~ cmder.status=false ]] || [[ ${gitStatusSetting} =~ cmder.shstatus=false ]]
+  then
+    echo false
+  else
+    echo true
+  fi
+}
+
+function getSimpleGitBranch() {
+  gitDir=$(git rev-parse --git-dir 2>/dev/null)
+  if [ -z "$gitDir" ]; then
+		return 0
+	fi
+  
+  headContent=$(< "$gitDir/HEAD")
+  if [[ "$headContent" == "ref: refs/heads/"* ]]
+  then
+      echo " (${headContent:16})"
+  else
+      echo " (HEAD detached at ${headContent:0:7})"
+  fi 
+}
+
 if test -f /etc/profile.d/git-sdk.sh
 then
   TITLEPREFIX=SDK-${MSYSTEM#MINGW}
@@ -7,7 +33,10 @@ fi
 
 if test -f ~/.config/git/git-prompt.sh
 then
-  . ~/.config/git/git-prompt.sh
+  if [[ $(getGitStatusSetting) == true ]]
+  then
+    . ~/.config/git/git-prompt.sh
+  fi
 else
   PS1='\[\033]0;$MSYSTEM:${PWD//[^[:ascii:]]/?}\007\]' # set window title
   # PS1="$PS1"'\n'                 # new line
@@ -26,9 +55,15 @@ else
     if test -f "$COMPLETION_PATH/git-prompt.sh"
     then
       . "$COMPLETION_PATH/git-completion.bash"
-      . "$COMPLETION_PATH/git-prompt.sh"
-      PS1="$PS1"'\[\033[36m\]'  # change color to cyan
-      PS1="$PS1"'`__git_ps1`'   # bash function
+      if [[ $(getGitStatusSetting) == true ]]
+      then
+        . "$COMPLETION_PATH/git-prompt.sh"
+        PS1="$PS1"'\[\033[36m\]'  # change color to cyan
+        PS1="$PS1"'`__git_ps1`'   # bash function
+      else
+        PS1="$PS1"'\[\033[37;1m\]'  # change color to white
+        PS1="$PS1"'`getSimpleGitBranch`'
+      fi
     fi
   fi
   PS1="$PS1"'\[\033[0m\]'        # change color

vendor/init.bat

@@ -9,11 +9,23 @@ set CMDER_INIT_START=%time%
 :: !!! Use "%CMDER_ROOT%\config\user_profile.cmd" to add your own startup commands
 
 :: Use /v command line arg or set to > 0 for verbose output to aid in debugging.
-set verbose_output=0
-set debug_output=0
-set time_init=0
-set fast_init=0
-set max_depth=1
+if not defined verbose_output set verbose_output=0
+
+:: Use /d command line arg or set to 1 for debug output to aid in debugging.
+if not defined debug_output set debug_output=0
+
+:: Use /t command line arg or set to 1 to display init time.
+if not defined time_init set time_init=0
+
+:: Use /f command line arg to speed up init at the expense of some functionality.
+if not defined fast_init set fast_init=0
+
+:: Use /max_depth 1-5 to set max recurse depth for calls to `enhance_path_recursive`
+if not defined max_depth set max_depth=1
+
+:: Add *nix tools to end of path. 0 turns off *nix tools, 2 adds *nix tools to the front of thr path.
+if not defined nix_tools set nix_tools=1
+
 set "CMDER_USER_FLAGS= "
 
 :: Find root dir
@@ -55,7 +67,7 @@ call "%cmder_root%\vendor\lib\lib_profile"
             set "max_depth=%~2"
             shift
         ) else (
-            %lib_console% show_error "'/max_depth' requires a number between 1 and 5!"
+            %print_error% "'/max_depth' requires a number between 1 and 5!"
             exit /b
         )
     ) else if /i "%1" == "/c" (
@@ -76,15 +88,29 @@ call "%cmder_root%\vendor\lib\lib_profile"
             set "GIT_INSTALL_ROOT=%~2"
             shift
         ) else (
-            %lib_console% show_error "The Git install root folder "%~2", you specified does not exist!"
+            %print_error% "The Git install root folder "%~2", you specified does not exist!"
             exit /b
         )
+    ) else if /i "%1"=="/nix_tools" (
+        if "%2" equ "0" (
+            REM Do not add *nix tools to path
+            set nix_tools=0
+            shift
+        ) else if "%2" equ "1" (
+            REM Add *nix tools to end of path
+            set nix_tools=1
+            shift
+        ) else if "%2" equ "2" (
+            REM Add *nix tools to front of path
+            set nix_tools=2
+            shift
+        )
     ) else if /i "%1" == "/home" (
         if exist "%~2" (
             set "HOME=%~2"
             shift
         ) else (
-            %lib_console% show_error The home folder "%2", you specified does not exist!
+            %print_error% The home folder "%2", you specified does not exist!
             exit /b
         )
     ) else if /i "%1" == "/svn_ssh" (
@@ -99,41 +125,86 @@ goto var_loop
 :start
 :: Sets CMDER_SHELL, CMDER_CLINK, CMDER_ALIASES
 %lib_base% cmder_shell
-%lib_console% debug_output init.bat "Env Var - CMDER_ROOT=%CMDER_ROOT%"
-%lib_console% debug_output init.bat "Env Var - debug_output=%debug_output%"
+%print_debug% init.bat "Env Var - CMDER_ROOT=%CMDER_ROOT%"
+%print_debug% init.bat "Env Var - debug_output=%debug_output%"
 
 if defined CMDER_USER_CONFIG (
-    %lib_console% debug_output init.bat "CMDER IS ALSO USING INDIVIDUAL USER CONFIG FROM '%CMDER_USER_CONFIG%'!"
+    %print_debug% init.bat "CMDER IS ALSO USING INDIVIDUAL USER CONFIG FROM '%CMDER_USER_CONFIG%'!"
+
+    if not exist "%CMDER_USER_CONFIG%\..\opt" md "%CMDER_USER_CONFIG%\..\opt"
 )
 
 :: Pick right version of clink
 if "%PROCESSOR_ARCHITECTURE%"=="x86" (
-    set architecture=86
+    set clink_architecture=x86
     set architecture_bits=32
 ) else (
-    set architecture=64
+    set clink_architecture=x64
     set architecture_bits=64
 )
 
 if "%CMDER_CLINK%" == "1" (
-  %lib_console% verbose_output "Injecting Clink!"
+  %print_verbose% "Injecting Clink!"
 
   :: Run clink
   if defined CMDER_USER_CONFIG (
-    if not exist "%CMDER_USER_CONFIG%\settings" (
-      echo Generating clink initial settings in "%CMDER_USER_CONFIG%\settings"
-      echo Additional *.lua files in "%CMDER_USER_CONFIG%" are loaded on startup.\
+    if not exist "%CMDER_USER_CONFIG%\settings" if not exist "%CMDER_USER_CONFIG%\clink_settings" (
+      echo Generating clink initial settings in "%CMDER_USER_CONFIG%\clink_settings"
+      copy "%CMDER_ROOT%\vendor\clink_settings.default" "%CMDER_USER_CONFIG%\clink_settings"
+      echo Additional *.lua files in "%CMDER_USER_CONFIG%" are loaded on startup.
     )
-    "%CMDER_ROOT%\vendor\clink\clink_x%architecture%.exe" inject --quiet --profile "%CMDER_USER_CONFIG%" --scripts "%CMDER_ROOT%\vendor"
+
+    if not exist "%CMDER_USER_CONFIG%\cmder_prompt_config.lua" (
+      echo Creating Cmder prompt config file: "%CMDER_USER_CONFIG%\cmder_prompt_config.lua"
+      copy "%CMDER_ROOT%\vendor\cmder_prompt_config.lua.default" "%CMDER_USER_CONFIG%\cmder_prompt_config.lua"
+    )
+
+    REM Cleanup lagacy Clink Settings file
+    if exist "%CMDER_USER_CONFIG%\settings" if exist "%CMDER_USER_CONFIG%\clink_settings" (
+      del "%CMDER_USER_CONFIG%\settings"
+    )
+
+    REM Cleanup legacy CLink history file
+    if exist "%CMDER_USER_CONFIG%\.history" if exist "%CMDER_USER_CONFIG%\clink_history" (
+      del "%CMDER_USER_CONFIG%\.history"
+    )
+    "%CMDER_ROOT%\vendor\clink\clink_%clink_architecture%.exe" inject --quiet --profile "%CMDER_USER_CONFIG%" --scripts "%CMDER_ROOT%\vendor"
   ) else (
-    if not exist "%CMDER_ROOT%\config\settings" (
-      echo Generating clink initial settings in "%CMDER_ROOT%\config\settings"
+    if not exist "%CMDER_ROOT%\config\settings" if not exist "%CMDER_ROOT%\config\clink_settings" (
+      echo Generating clink initial settings in "%CMDER_ROOT%\config\clink_settings"
+      copy "%CMDER_ROOT%\vendor\clink_settings.default" "%CMDER_ROOT%\config\clink_settings"
       echo Additional *.lua files in "%CMDER_ROOT%\config" are loaded on startup.
     )
-    "%CMDER_ROOT%\vendor\clink\clink_x%architecture%.exe" inject --quiet --profile "%CMDER_ROOT%\config" --scripts "%CMDER_ROOT%\vendor"
+    
+    if not exist "%CMDER_ROOT%\config\cmder_prompt_config.lua" (
+      echo Creating Cmder prompt config file: "%CMDER_ROOT%\config\cmder_prompt_config.lua"
+      copy "%CMDER_ROOT%\vendor\cmder_prompt_config.lua.default" "%CMDER_ROOT%\config\cmder_prompt_config.lua"
+    )
+
+    REM Cleanup lagacy Clink Settings file
+    if exist "%CMDER_ROOT%\config\settings" if exist "%CMDER_ROOT%\config\clink_settings" (
+      del "%CMDER_ROOT%\config\settings"
+    )
+
+    REM Cleanup legacy Clink history file
+    if exist "%CMDER_ROOT%\config\.history" if exist "%CMDER_ROOT%\config\clink_history" (
+      del "%CMDER_ROOT%\config\.history"
+    )
+
+    "%CMDER_ROOT%\vendor\clink\clink_%clink_architecture%.exe" inject --quiet --profile "%CMDER_ROOT%\config" --scripts "%CMDER_ROOT%\vendor"
   )
 ) else (
-  %lib_console% verbose_output "WARNING: Incompatible 'ComSpec/Shell' Detetected Skipping Clink Injection!"
+  %print_verbose% "WARNING: Incompatible 'ComSpec/Shell' Detetected Skipping Clink Injection!"
+)
+
+if "%CMDER_CONFIGURED%" GTR "1" (
+  %print_verbose% "Cmder is already configured, skipping Cmder Init!"
+
+  goto USER_ALIASES
+) else if "%CMDER_CONFIGURED%" == "1" (
+  %print_verbose% "Cmder is already configured, skipping to Cmder User Init!"
+
+  goto USER_CONFIG_START
 )
 
 :: Prepare for git-for-windows
@@ -147,67 +218,30 @@ if not defined TERM set TERM=cygwin
 :: * test if a git is in path and if yes, use that
 :: * last, use our vendored git
 :: also check that we have a recent enough version of git by examining the version string
-setlocal enabledelayedexpansion
 if defined GIT_INSTALL_ROOT (
     if exist "%GIT_INSTALL_ROOT%\cmd\git.exe" goto :SPECIFIED_GIT
 ) else if "%fast_init%" == "1" (
     if exist "%CMDER_ROOT%\vendor\git-for-windows\cmd\git.exe" (
-      %lib_console% debug_output "Skipping Git Auto-Detect!"
+      %print_debug% "Skipping Git Auto-Detect!"
       goto :VENDORED_GIT
     )
 )
 
-%lib_console% debug_output init.bat "Looking for Git install root..."
+%print_debug% init.bat "Looking for Git install root..."
 
 :: get the version information for vendored git binary
-%lib_git% read_version VENDORED "%CMDER_ROOT%\vendor\git-for-windows\cmd"
+%lib_git% read_version VENDORED "%CMDER_ROOT%\vendor\git-for-windows\cmd" 2>nul
 %lib_git% validate_version VENDORED %GIT_VERSION_VENDORED%
 
 :: check if git is in path...
 for /F "delims=" %%F in ('where git.exe 2^>nul') do (
     :: get the absolute path to the user provided git binary
-    pushd %%~dpF
-    :: check if there's shim - and if yes follow the path
-    if exist git.shim (
-        for /F "tokens=2 delims== " %%I in (git.shim) do (
-            pushd %%~dpI
-            set "test_dir=!CD!"
-            popd
-        )
-    ) else (
-        set "test_dir=!CD!"
-    )
-    popd
-
-    :: get the version information for the user provided git binary
-    %lib_git% read_version USER "!test_dir!"
-    %lib_git% validate_version USER !GIT_VERSION_USER!
-
-    if !errorlevel! geq 0 (
-        :: compare the user git version against the vendored version
-        %lib_git% compare_versions USER VENDORED
-
-        :: use the user provided git if its version is greater than, or equal to the vendored git
-        if !errorlevel! geq 0 if exist "!test_dir:~0,-4!\cmd\git.exe" (
-            set "GIT_INSTALL_ROOT=!test_dir:~0,-4!"
-            set test_dir=
-            goto :FOUND_GIT
-        ) else if !errorlevel! geq 0 (
-            set "GIT_INSTALL_ROOT=!test_dir!"
-            set test_dir=
-            goto :FOUND_GIT
-        ) else (
-            call :verbose_output Found old !GIT_VERSION_USER! in "!test_dir!", but not using...
-            set test_dir=
-        )
-    ) else (
-
-        :: if the user provided git executable is not found
-        if !errorlevel! equ -255 (
-            call :verbose_output No git at "!git_executable!" found.
-            set test_dir=
-        )
+    %lib_git% is_git_shim "%%~dpF"
+    %lib_git% get_user_git_version
+    %lib_git% compare_git_versions
 
+    if defined GIT_INSTALL_ROOT (
+        goto :FOUND_GIT
     )
 )
 
@@ -215,50 +249,68 @@ for /F "delims=" %%F in ('where git.exe 2^>nul') do (
 :VENDORED_GIT
 if exist "%CMDER_ROOT%\vendor\git-for-windows" (
     set "GIT_INSTALL_ROOT=%CMDER_ROOT%\vendor\git-for-windows"
-    %lib_console% debug_output "Using vendored Git from '!GIT_INSTALL_ROOT!..."
+    %print_debug% "Using vendored Git '%GIT_VERSION_VENDORED%'..."
     goto :CONFIGURE_GIT
 ) else (
     goto :NO_GIT
 )
 
 :SPECIFIED_GIT
-%lib_console% debug_output "Using /GIT_INSTALL_ROOT from '%GIT_INSTALL_ROOT%..."
+%print_debug% "Using /GIT_INSTALL_ROOT..."
 goto :CONFIGURE_GIT
 
 :FOUND_GIT
-%lib_console% debug_output "Using found Git from '%GIT_INSTALL_ROOT%..."
+%print_debug% "Using found Git '%GIT_VERSION_USER%' from '%GIT_INSTALL_ROOT%..."
 goto :CONFIGURE_GIT
 
 :CONFIGURE_GIT
+%print_debug% "Using Git from '%GIT_INSTALL_ROOT%..."
 :: Add git to the path
-if defined GIT_INSTALL_ROOT (
-    rem add the unix commands at the end to not shadow windows commands like more
-    if exist "!GIT_INSTALL_ROOT!\cmd\git.exe" %lib_path% enhance_path "!GIT_INSTALL_ROOT!\cmd" append
-    if exist "!GIT_INSTALL_ROOT!\mingw32" (
-        %lib_path% enhance_path "!GIT_INSTALL_ROOT!\mingw32\bin" append
-    ) else if exist "!GIT_INSTALL_ROOT!\mingw64" (
-        %lib_path% enhance_path "!GIT_INSTALL_ROOT!\mingw64\bin" append
+if exist "%GIT_INSTALL_ROOT%\cmd\git.exe" %lib_path% enhance_path "%GIT_INSTALL_ROOT%\cmd" ""
+
+:: Add the unix commands at the end to not shadow windows commands like more
+if %nix_tools% equ 1 (
+    %print_verbose% "Preferring Windows commands"
+    set "path_position=append"
+) else (
+    %print_verbose% "Preferring *nix commands"
+    set "path_position="
+)
+
+if %nix_tools% geq 1 (
+    if exist "%GIT_INSTALL_ROOT%\mingw32" (
+        %lib_path% enhance_path "%GIT_INSTALL_ROOT%\mingw32\bin" %path_position%
+    ) else if exist "%GIT_INSTALL_ROOT%\mingw64" (
+        %lib_path% enhance_path "%GIT_INSTALL_ROOT%\mingw64\bin" %path_position%
     )
-    %lib_path% enhance_path "!GIT_INSTALL_ROOT!\usr\bin" append
-
-    :: define SVN_SSH so we can use git svn with ssh svn repositories
-    if not defined SVN_SSH set "SVN_SSH=%GIT_INSTALL_ROOT:\=\\%\\bin\\ssh.exe"
-    
-    if not defined LANG (
-        :: Find locale.exe: From the git install root, from the path, using the git installed env, or fallback using the env from the path.
-        if not defined git_locale if exist "!GIT_INSTALL_ROOT!\usr\bin\locale.exe" set git_locale="!GIT_INSTALL_ROOT!\usr\bin\locale.exe"
-        if not defined git_locale for /F "delims=" %%F in ('where locale.exe 2^>nul') do (if not defined git_locale  set git_locale="%%F")
-        if not defined git_locale if exist "!GIT_INSTALL_ROOT!\usr\bin\env.exe" set git_locale="!GIT_INSTALL_ROOT!\usr\bin\env.exe" /usr/bin/locale
-        if not defined git_locale set git_locale=env /usr/bin/locale
-        for /F "delims=" %%F in ('!git_locale! -uU 2') do (
-            set "LANG=%%F"
-        )
+    if exist "%GIT_INSTALL_ROOT%\usr\bin" (
+        %lib_path% enhance_path "%GIT_INSTALL_ROOT%\usr\bin" %path_position%
     )
 )
 
-endlocal & set "PATH=%PATH%" & set "LANG=%LANG%" & set "SVN_SSH=%SVN_SSH%" & set "GIT_INSTALL_ROOT=%GIT_INSTALL_ROOT%"
-%lib_console% debug_output init.bat "Env Var - GIT_INSTALL_ROOT=%GIT_INSTALL_ROOT%"
-%lib_console% debug_output init.bat "Found Git in: '%GIT_INSTALL_ROOT%'"
+:: define SVN_SSH so we can use git svn with ssh svn repositories
+if not defined SVN_SSH set "SVN_SSH=%GIT_INSTALL_ROOT:\=\\%\\bin\\ssh.exe"
+
+:: Find locale.exe: From the git install root, from the path, using the git installed env, or fallback using the env from the path.
+if not defined git_locale if exist "%GIT_INSTALL_ROOT%\usr\bin\locale.exe" set git_locale="%GIT_INSTALL_ROOT%\usr\bin\locale.exe"
+if not defined git_locale for /F "tokens=* delims=" %%F in ('where locale.exe 2^>nul') do ( if not defined git_locale  set git_locale="%%F" )
+if not defined git_locale if exist "%GIT_INSTALL_ROOT%\usr\bin\env.exe" set git_locale="%GIT_INSTALL_ROOT%\usr\bin\env.exe" /usr/bin/locale
+if not defined git_locale for /F "tokens=* delims=" %%F in ('where env.exe 2^>nul') do ( if not defined git_locale  set git_locale="%%F" /usr/bin/locale )
+
+setlocal enabledelayedexpansion
+if defined git_locale (
+
+  REM %print_debug% init.bat "Env Var - git_locale=!git_locale!"
+  if not defined LANG (
+      for /F "delims=" %%F in ('!git_locale! -uU 2') do (
+          set "LANG=%%F"
+      )
+  )
+)
+endlocal && set LANG=%LANG%
+
+%print_debug% init.bat "Env Var - GIT_INSTALL_ROOT=%GIT_INSTALL_ROOT%"
+%print_debug% init.bat "Found Git in: '%GIT_INSTALL_ROOT%'"
 goto :PATH_ENHANCE
 
 :NO_GIT
@@ -267,9 +319,11 @@ endlocal
 
 :PATH_ENHANCE
 %lib_path% enhance_path "%CMDER_ROOT%\vendor\bin"
-%lib_path% enhance_path_recursive "%CMDER_ROOT%\bin" %max_depth%
+
+:USER_CONFIG_START
+%lib_path% enhance_path_recursive "%CMDER_ROOT%\bin" 0 %max_depth%
 if defined CMDER_USER_BIN (
-  %lib_path% enhance_path_recursive "%CMDER_USER_BIN%" %max_depth%
+  %lib_path% enhance_path_recursive "%CMDER_USER_BIN%" 0 %max_depth%
 )
 %lib_path% enhance_path "%CMDER_ROOT%" append
 
@@ -280,11 +334,12 @@ if defined CMDER_USER_CONFIG (
   %lib_profile% run_profile_d "%CMDER_USER_CONFIG%\profile.d"
 )
 
+:USER_ALIASES
 :: Allows user to override default aliases store using profile.d
 :: scripts run above by setting the 'aliases' env variable.
 ::
 :: Note: If overriding default aliases store file the aliases
-:: must also be self executing, see '.\user_aliases.cmd.example',
+:: must also be self executing, see '.\user_aliases.cmd.default',
 :: and be in profile.d folder.
 if not defined user_aliases (
   if defined CMDER_USER_CONFIG (
@@ -302,22 +357,11 @@ if "%CMDER_ALIASES%" == "1" (
   )
 
   REM Make sure we have a self-extracting user_aliases.cmd file
-  setlocal enabledelayedexpansion
   if not exist "%user_aliases%" (
       echo Creating initial user_aliases store in "%user_aliases%"...
-      copy "%CMDER_ROOT%\vendor\user_aliases.cmd.example" "%user_aliases%"
+      copy "%CMDER_ROOT%\vendor\user_aliases.cmd.default" "%user_aliases%"
   ) else (
-      type "%user_aliases%" | %WINDIR%\System32\findstr /i ";= Add aliases below here" >nul
-      if "!errorlevel!" == "1" (
-          echo Creating initial user_aliases store in "%user_aliases%"...
-          if defined CMDER_USER_CONFIG (
-              copy "%user_aliases%" "%user_aliases%.old_format"
-              copy "%CMDER_ROOT%\vendor\user_aliases.cmd.example" "%user_aliases%"
-          ) else (
-              copy "%user_aliases%" "%user_aliases%.old_format"
-              copy "%CMDER_ROOT%\vendor\user_aliases.cmd.example" "%user_aliases%"
-          )
-      )
+    %lib_base% update_legacy_aliases
   )
 
   :: Update old 'user_aliases' to new self executing 'user_aliases.cmd'
@@ -330,30 +374,38 @@ if "%CMDER_ALIASES%" == "1" (
     type "%user_aliases%.old_format" >> "%user_aliases%"
     del "%user_aliases%.old_format"
   )
-  endlocal
 )
 
 :: Add aliases to the environment
+type "%user_aliases%" | findstr /b /l /i "history=cat " >nul
+if "%ERRORLEVEL%" == "0" (
+  echo Migrating alias 'history' to new Clink 1.x.x...
+  call "%CMDER_ROOT%\vendor\bin\alias.cmd" /d history
+  echo Restart the session to activate changes!
+)
+
 call "%user_aliases%"
 
+if "%CMDER_CONFIGURED%" gtr "1" goto CMDER_CONFIGURED
+
 :: See vendor\git-for-windows\README.portable for why we do this
 :: Basically we need to execute this post-install.bat because we are
 :: manually extracting the archive rather than executing the 7z sfx
 if exist "%GIT_INSTALL_ROOT%\post-install.bat" (
-    %lib_console% verbose_output "Running Git for Windows one time Post Install...."
+    echo Running Git for Windows one time Post Install....
     pushd "%GIT_INSTALL_ROOT%\"
-    "%GIT_INSTALL_ROOT%\git-bash.exe" --no-needs-console --hide --no-cd --command=post-install.bat
+    "%GIT_INSTALL_ROOT%\git-cmd.exe" --no-needs-console --no-cd --command=post-install.bat
     popd
 )
 
 :: Set home path
 if not defined HOME set "HOME=%USERPROFILE%"
-%lib_console% debug_output init.bat "Env Var - HOME=%HOME%"
+%print_debug% init.bat "Env Var - HOME=%HOME%"
 
 set "initialConfig=%CMDER_ROOT%\config\user_profile.cmd"
 if exist "%CMDER_ROOT%\config\user_profile.cmd" (
     REM Create this file and place your own command in there
-    %lib_console% debug_output init.bat "Calling - %CMDER_ROOT%\config\user_profile.cmd"
+    %print_debug% init.bat "Calling - %CMDER_ROOT%\config\user_profile.cmd"
     call "%CMDER_ROOT%\config\user_profile.cmd"
 )
 
@@ -361,34 +413,14 @@ if defined CMDER_USER_CONFIG (
   set "initialConfig=%CMDER_USER_CONFIG%\user_profile.cmd"
   if exist "%CMDER_USER_CONFIG%\user_profile.cmd" (
       REM Create this file and place your own command in there
-      %lib_console% debug_output init.bat "Calling - %CMDER_USER_CONFIG%\user_profile.cmd
+      %print_debug% init.bat "Calling - %CMDER_USER_CONFIG%\user_profile.cmd"
       call "%CMDER_USER_CONFIG%\user_profile.cmd"
   )
 )
 
 if not exist "%initialConfig%" (
     echo Creating user startup file: "%initialConfig%"
-    (
-echo :: use this file to run your own startup commands
-echo :: use in front of the command to prevent printing the command
-echo.
-echo :: uncomment this to have the ssh agent load when cmder starts
-echo :: call "%%GIT_INSTALL_ROOT%%/cmd/start-ssh-agent.cmd"
-echo.
-echo :: uncomment the next two lines to use pageant as the ssh authentication agent
-echo :: SET SSH_AUTH_SOCK=/tmp/.ssh-pageant-auth-sock
-echo :: call "%%GIT_INSTALL_ROOT%%/cmd/start-ssh-pageant.cmd"
-echo.
-echo :: you can add your plugins to the cmder path like so
-echo :: set "PATH=%%CMDER_ROOT%%\vendor\whatever;%%PATH%%"
-echo.
-echo :: arguments in this batch are passed from init.bat, you can quickly parse them like so:
-echo :: more useage can be seen by typing "cexec /?"
-echo.
-echo :: %%ccall%% "/customOption" "command/program"
-echo.
-echo @echo off
-) >"%initialConfig%"
+    copy "%CMDER_ROOT%\vendor\user_profile.cmd.default" "%initialConfig%"
 )
 
 if "%CMDER_ALIASES%" == "1" if exist "%CMDER_ROOT%\bin\alias.bat" if exist "%CMDER_ROOT%\vendor\bin\alias.cmd" (
@@ -405,11 +437,13 @@ if "%CMDER_ALIASES%" == "1" if exist "%CMDER_ROOT%\bin\alias.bat" if exist "%CMD
 )
 
 set initialConfig=
-set CMDER_CONFIGURED=1
+
+:CMDER_CONFIGURED
+if not defined CMDER_CONFIGURED set CMDER_CONFIGURED=1
 
 set CMDER_INIT_END=%time%
 
 if %time_init% gtr 0 (
-  "%cmder_root%\vendor\bin\timer.cmd" %CMDER_INIT_START% %CMDER_INIT_END%
+  "%cmder_root%\vendor\bin\timer.cmd" "%CMDER_INIT_START%" "%CMDER_INIT_END%"
 )
 exit /b

vendor/lib/lib_base.cmd

@@ -65,12 +65,30 @@ exit /b
     echo %comspec% | %WINDIR%\System32\find /i "\tcc.exe" > nul && set "CMDER_SHELL=tcc"
     echo %comspec% | %WINDIR%\System32\find /i "\tccle" > nul && set "CMDER_SHELL=tccle"
 
-    set CMDER_CLINK=1
-    if "%CMDER_SHELL%" equ "tcc" set CMDER_CLINK=0
-    if "%CMDER_SHELL%" equ "tccle" set CMDER_CLINK=0
+    if not defined CMDER_CLINK (
+        set CMDER_CLINK=1
+        if "%CMDER_SHELL%" equ "tcc" set CMDER_CLINK=0
+        if "%CMDER_SHELL%" equ "tccle" set CMDER_CLINK=0
+    )
 
-    set CMDER_ALIASES=1
-    if "%CMDER_SHELL%" equ "tcc" set CMDER_ALIASES=0
-    if "%CMDER_SHELL%" equ "tccle" set CMDER_ALIASES=0
+    if not defined CMDER_ALIASES (
+        set CMDER_ALIASES=1
+        if "%CMDER_SHELL%" equ "tcc" set CMDER_ALIASES=0
+        if "%CMDER_SHELL%" equ "tccle" set CMDER_ALIASES=0
+    )
 
     exit /b
+
+:update_legacy_aliases
+    type "%user_aliases%" | %WINDIR%\System32\findstr /i ";= Add aliases below here" >nul
+    if "%errorlevel%" == "1" (
+        echo Creating initial user_aliases store in "%user_aliases%"...
+        if defined CMDER_USER_CONFIG (
+            copy "%user_aliases%" "%user_aliases%.old_format"
+            copy "%CMDER_ROOT%\vendor\user_aliases.cmd.default" "%user_aliases%"
+        ) else (
+            copy "%user_aliases%" "%user_aliases%.old_format"
+            copy "%CMDER_ROOT%\vendor\user_aliases.cmd.default" "%user_aliases%"
+        )
+    )
+    exit /b

vendor/lib/lib_console.cmd

@@ -1,10 +1,15 @@
 @echo off
 
-if "%fast_init%" == "1" exit /b
-
 call "%~dp0lib_base.cmd"
 set lib_console=call "%~dp0lib_console.cmd"
 
+:: Much faster than using "%lib_console% debug_output ..." etc.
+set print_debug=if %debug_output% gtr 0 %lib_console% debug_output
+set print_verbose=if %verbose_output% gtr 0 %lib_console% verbose_output
+set print_error=%lib_console% show_error
+
+if "%fast_init%" == "1" exit /b
+
 if "%~1" == "/h" (
     %lib_base% help "%~0"
 ) else if "%1" neq "" (

vendor/lib/lib_git.cmd

@@ -14,7 +14,7 @@ exit /b
 
 :read_version
 :::===============================================================================
-:::read_version - Get the git.exe verion
+:::read_version - Get the git.exe version
 :::.
 :::include:
 :::.
@@ -34,33 +34,33 @@ exit /b
 :::  GIT_VERSION_[GIT SCOPE] <out> Env variable containing Git semantic version string
 :::-------------------------------------------------------------------------------
 
-    setlocal enabledelayedexpansion
     :: clear the variables
     set GIT_VERSION_%~1=
 
     :: set the executable path
     set "git_executable=%~2\git.exe"
-    %lib_console% debug_output :read_version "Env Var - git_executable=%git_executable%"
+    %print_debug% :read_version "Env Var - git_executable=%git_executable%"
 
     :: check if the executable actually exists
     if not exist "%git_executable%" (
-        %lib_console% debug_output :read_version "%git_executable% does not exist."
+        %print_debug% :read_version "%git_executable% does not exist."
         exit /b -255
     )
 
     :: get the git version in the provided directory
-    for /F "tokens=1,2,3 usebackq" %%A in (`"%git_executable%" --version 2^>nul`) do (
+    "%git_executable%" --version > "%temp%\git_version.txt"
+    setlocal enabledelayedexpansion
+    for /F "tokens=1,2,3 usebackq" %%A in (`type "%temp%\git_version.txt" 2^>nul`) do (
         if /i "%%A %%B" == "git version" (
             set "GIT_VERSION=%%C"
-            %lib_console% debug_output :read_version "Env Var - GIT_VERSION_%~1=!GIT_VERSION!"
         ) else (
-            %lib_console% show_error "git --version" returned an inproper version string!
+            echo "'git --version' returned an improper version string!"
             pause
             exit /b
         )
     )
+    endlocal & set "GIT_VERSION_%~1=%GIT_VERSION%" & %print_debug% :read_version "Env Var - GIT_VERSION_%~1=%GIT_VERSION%"
 
-    endlocal & set "GIT_VERSION_%~1=%GIT_VERSION%"
     exit /b
 
 :parse_version
@@ -88,9 +88,10 @@ exit /b
 :::  [SCOPE]_BUILD <out> Scoped Build version.
 :::-------------------------------------------------------------------------------
 
-    setlocal enabledelayedexpansion
     :: process a `x.x.x.xxxx.x` formatted string
-    %lib_console% debug_output :parse_version "ARGV[1]=%~1, ARGV[2]=%~2"
+    %print_debug% :parse_version "ARGV[1]=%~1, ARGV[2]=%~2"
+
+    setlocal enabledelayedexpansion
     for /F "tokens=1-3* delims=.,-" %%A in ("%2") do (
         set "%~1_MAJOR=%%A"
         set "%~1_MINOR=%%B"
@@ -98,9 +99,17 @@ exit /b
         set "%~1_BUILD=%%D"
     )
 
-    endlocal & set "%~1_MAJOR=!%~1_MAJOR!" & set "%~1_MINOR=!%~1_MINOR!" & set "%~1_PATCH=!%~1_PATCH!" & set "%~1_BUILD=!%~1_BUILD!"
+    REM endlocal & set "%~1_MAJOR=!%~1_MAJOR!" & set "%~1_MINOR=!%~1_MINOR!" & set "%~1_PATCH=!%~1_PATCH!" & set "%~1_BUILD=!%~1_BUILD!"
+    if "%~1" == "VENDORED" (
+      endlocal & set "%~1_MAJOR=%VENDORED_MAJOR%" & set "%~1_MINOR=%VENDORED_MINOR%" & set "%~1_PATCH=%VENDORED_PATCH%" & set "%~1_BUILD=%VENDORED_BUILD%"
+    ) else (
+      endlocal & set "%~1_MAJOR=%USER_MAJOR%" & set "%~1_MINOR=%USER_MINOR%" & set "%~1_PATCH=%USER_PATCH%" & set "%~1_BUILD=%USER_BUILD%"
+    )
+
     exit /b
 
+:endlocal_set_git_version
+
 :validate_version
 :::===============================================================================
 :::validate_version - Validate semantic version string 'x.x.x.x'.
@@ -120,11 +129,17 @@ exit /b
 :::-------------------------------------------------------------------------------
 
     :: now parse the version information into the corresponding variables
-    %lib_console% debug_output :validate_version "ARGV[1]=%~1, ARGV[2]=%~2"
+    %print_debug% :validate_version "ARGV[1]=%~1, ARGV[2]=%~2"
+
     call :parse_version %~1 %~2
 
     :: ... and maybe display it, for debugging purposes.
-    %lib_console% debug_output :validate_version "Found Git Version for %~1: !%~1_MAJOR!.!%~1_MINOR!.!%~1_PATCH!.!%~1_BUILD!"
+    REM %print_debug% :validate_version "Found Git Version for %~1: !%~1_MAJOR!.!%~1_MINOR!.!%~1_PATCH!.!%~1_BUILD!"
+    if "%~1" == "VENDORED" (
+      %print_debug% :validate_version "Found Git Version for %~1: %VENDORED_MAJOR%.%VENDORED_MINOR%.%VENDORED_PATCH%.%VENDORED_BUILD%"
+    ) else (
+      %print_debug% :validate_version "Found Git Version for %~1: %USER_MAJOR%.%USER_MINOR%.%USER_PATCH%.%USER_BUILD%"
+    )
     exit /b
 
 :compare_versions
@@ -148,21 +163,115 @@ exit /b
     :: checks all major, minor, patch and build variables for the given arguments.
     :: whichever binary that has the most recent version will be used based on the return code.
 
-    %lib_console% debug_output Comparing:
-    %lib_console% debug_output %~1: !%~1_MAJOR!.!%~1_MINOR!.!%~1_PATCH!.!%~1_BUILD!
-    %lib_console% debug_output %~2: !%~2_MAJOR!.!%~2_MINOR!.!%~2_PATCH!.!%~2_BUILD!
+    %print_debug% Comparing:
+    %print_debug% %~1: %USER_MAJOR%.%USER_MINOR%.%USER_PATCH%.%USER_BUILD%
+    %print_debug% %~2: %VENDORED_MAJOR%.%VENDORED_MINOR%.%VENDORED_PATCH%.%VENDORED_BUILD%
 
-    if !%~1_MAJOR! GTR !%~2_MAJOR! (exit /b  1)
-    if !%~1_MAJOR! LSS !%~2_MAJOR! (exit /b -1)
+    setlocal enabledelayedexpansion
+    if !%~1_MAJOR! GTR !%~2_MAJOR! (endlocal & exit /b  1)
+    if !%~1_MAJOR! LSS !%~2_MAJOR! (endlocal & exit /b -1)
 
-    if !%~1_MINOR! GTR !%~2_MINOR! (exit /b  1)
-    if !%~1_MINOR! LSS !%~2_MINOR! (exit /b -1)
+    if !%~1_MINOR! GTR !%~2_MINOR! (endlocal & exit /b  1)
+    if !%~1_MINOR! LSS !%~2_MINOR! (endlocal & exit /b -1)
 
-    if !%~1_PATCH! GTR !%~2_PATCH! (exit /b  1)
-    if !%~1_PATCH! LSS !%~2_PATCH! (exit /b -1)
+    if !%~1_PATCH! GTR !%~2_PATCH! (endlocal & exit /b  1)
+    if !%~1_PATCH! LSS !%~2_PATCH! (endlocal & exit /b -1)
 
-    if !%~1_BUILD! GTR !%~2_BUILD! (exit /b  1)
-    if !%~1_BUILD! LSS !%~2_BUILD! (exit /b -1)
+    if !%~1_BUILD! GTR !%~2_BUILD! (endlocal & exit /b  1)
+    if !%~1_BUILD! LSS !%~2_BUILD! (endlocal & exit /b -1)
 
     :: looks like we have the same versions.
-    exit /b 0
+    endlocal & exit /b 0
+
+:::===============================================================================
+:::is_git_shim
+:::.
+:::include:
+:::.
+:::  call "$0"
+:::.
+:::usage:
+:::.
+:::  %lib_git% is_git_shim [filepath]
+:::.
+:::required:
+:::.
+:::  [filepath]    <in>
+:::-------------------------------------------------------------------------------
+
+:is_git_shim
+    pushd "%~1"
+    :: check if there's shim - and if yes follow the path
+    setlocal enabledelayedexpansion
+    if exist git.shim (
+        for /F "tokens=2 delims== " %%I in (git.shim) do (
+            pushd %%~dpI
+            set "test_dir=!CD!"
+            popd
+        )
+    ) else (
+        set "test_dir=!CD!"
+    )
+    endlocal & set "test_dir=%test_dir%"
+
+    popd
+    exit /b
+
+:::===============================================================================
+:::compare_git_versions
+:::.
+:::include:
+:::.
+:::  call "$0"
+:::.
+:::usage:
+:::.
+:::  %lib_git% compare_git_versions
+:::-------------------------------------------------------------------------------
+
+:compare_git_versions
+    setlocal enabledelayedexpansion
+    if ERRORLEVEL 0 (
+        :: compare the user git version against the vendored version
+        !lib_git! compare_versions USER VENDORED
+
+        :: use the user provided git if its version is greater than, or equal to the vendored git
+        if ERRORLEVEL 0 (
+            if exist "!test_dir:~0,-4!\cmd\git.exe" (
+                set "GIT_INSTALL_ROOT=!test_dir:~0,-4!"
+            ) else (
+                set "GIT_INSTALL_ROOT=!test_dir!"
+            )
+        ) else (
+            %print_verbose% "Found old !GIT_VERSION_USER! in !test_dir!, but not using..."
+        )
+    ) else (
+        :: compare the user git version against the vendored version
+        :: if the user provided git executable is not found
+        IF ERRORLEVEL -255 IF NOT ERRORLEVEL -254 (
+            %print_verbose% "No git at "!git_executable!" found."
+            set test_dir=
+        )
+    )
+    endlocal && set "GIT_INSTALL_ROOT=%GIT_INSTALL_ROOT%" && set test_dir=
+
+    exit /b
+
+:::===============================================================================
+:::get_user_git_version - get the version information for the user provided git binary
+:::.
+:::include:
+:::.
+:::  call "$0"
+:::.
+:::usage:
+:::.
+:::  %lib_git% get_user_git_version
+:::-------------------------------------------------------------------------------
+
+:get_user_git_version
+    :: get the version information for the user provided git binary
+    %lib_git% read_version USER "%test_dir%" 2>nul
+    %lib_git% validate_version USER %GIT_VERSION_USER%
+    exit  /b
+

vendor/lib/lib_path.cmd

@@ -32,17 +32,17 @@ exit /b
 :::options:
 :::
 :::  append     <in> Append to the path env variable rather than pre-pend.
+::B
 :::
 :::output:
 :::
 :::  path       <out> Sets the path env variable if required.
 :::-------------------------------------------------------------------------------
 
-    setlocal enabledelayedexpansion
     if "%~1" neq "" (
         set "add_path=%~1"
     ) else (
-        %lib_console% show_error "You must specify a directory to add to the path!"
+        %print_error% "You must specify a directory to add to the path!"
         exit 1
     )
 
@@ -52,50 +52,95 @@ exit /b
         set "position="
     )
 
+    dir "%add_path%" | findstr -i "\.COM \.EXE \.BAT \.CMD \.PS1 \.VBS" >NUL
+    if "%ERRORLEVEL%" == "0" (
+        set "add_to_path=%add_path%"
+    ) else (
+        set "add_to_path="
+    )
+
     if "%fast_init%" == "1" (
       if "%position%" == "append" (
-        set "PATH=%PATH%;%add_path%"
+        set "PATH=%PATH%;%add_to_path%"
       ) else (
-        set "PATH=%add_path%;%PATH%"
+        set "PATH=%add_to_path%;%PATH%"
       )
       goto :end_enhance_path
+    ) else if "add_to_path" equ "" (
+      goto :end_enhance_path
     )
 
     set found=0
-    set "find_query=%add_path%"
+    set "find_query=%add_to_path%"
     set "find_query=%find_query:\=\\%"
     set "find_query=%find_query: =\ %"
+    set "OLD_PATH=%PATH%"
 
-    if "%CMDER_CONFIGURED%" == "1" (
-      %lib_console% debug_output  :enhance_path "Env Var - find_query=%find_query%"
-      echo "%path%"|%WINDIR%\System32\findstr >nul /I /R ";%find_query%\"$"
-      if "!ERRORLEVEL!" == "0" set found=1
-    )
-    %lib_console% debug_output  :enhance_path "Env Var 1 - found=!found!"
-
+    setlocal enabledelayedexpansion
     if "!found!" == "0" (
-        if "%CMDER_CONFIGURED%" == "1" (
-            echo "%path%"|%WINDIR%\System32\findstr >nul /i /r ";%find_query%;"
-            if "!ERRORLEVEL!" == "0" set found=1
-        )
-        %lib_console% debug_output  :enhance_path "Env Var 2 - found=!found!"
+      echo "!path!"|!WINDIR!\System32\findstr >nul /I /R /C:";!find_query!;"
+      call :set_found
     )
+    %print_debug%  :enhance_path "Env Var INSIDE PATH !find_query! - found=!found!"
+
+    if /i "!position!" == "append" (
+      if "!found!" == "0" (
+        echo "!path!"|!WINDIR!\System32\findstr >nul /I /R /C:";!find_query!\"$"
+        call :set_found
+      )
+      %print_debug%  :enhance_path "Env Var END PATH !find_query! - found=!found!"
+    ) else (
+      if "!found!" == "0" (
+        echo "!path!"|!WINDIR!\System32\findstr >nul /I /R /C:"^\"!find_query!;"
+        call :set_found
+      )
+      %print_debug%  :enhance_path "Env Var BEGIN PATH !find_query! - found=!found!"
+    )
+    endlocal & set found=%found%
 
     if "%found%" == "0" (
-        %lib_console% debug_output :enhance_path "BEFORE Env Var - PATH=!path!"
         if /i "%position%" == "append" (
-            %lib_console% debug_output :enhance_path "Appending '%add_path%'"
-            set "PATH=%PATH%;%add_path%"
+            %print_debug% :enhance_path "Appending '%add_to_path%'"
+            set "PATH=%PATH%;%add_to_path%"
         ) else (
-            %lib_console% debug_output :enhance_path "Prepending '%add_path%'"
-            set "PATH=%add_path%;%PATH%"
+            %print_debug% :enhance_path "Prepending '%add_to_path%'"
+            set "PATH=%add_to_path%;%PATH%"
         )
 
-        %lib_console% debug_output  :enhance_path "AFTER Env Var - PATH=!path!"
+        set found=1
     )
 
     :end_enhance_path
-    endlocal & set "PATH=%PATH:;;=;%"
+    set "PATH=%PATH:;;=;%"
+
+    REM echo %path%|"C:\Users\dgames\cmder - dev\vendor\git-for-windows\usr\bin\wc" -c
+    if "%fast_init%" == "1" exit /b
+
+    if not "%OLD_PATH:~0,3000%" == "%OLD_PATH:~0,3001%" goto :toolong
+    if not "%OLD_PATH%" == "%PATH%" goto :changed
+    exit /b
+
+    :toolong
+      echo "%OLD_PATH%">tempfileA
+      echo "%PATH%">tempfileB
+      fc /b tempfileA tempfileB 2>nul 1>nul
+      if errorlevel 1 ( del tempfileA & del tempfileB & goto :changed )
+      del tempfileA & del tempfileB
+      exit /b
+
+    :changed
+      %print_debug%  :enhance_path "END Env Var - PATH=%path%"
+      %print_debug%  :enhance_path "Env Var %find_query% - found=%found%"
+      exit /b
+
+    exit /b
+
+
+:set_found
+    if "%ERRORLEVEL%" == "0" (
+      set found=1
+    )
+
     exit /b
 
 :enhance_path_recursive
@@ -117,7 +162,7 @@ exit /b
 :::.
 :::options:
 :::.
-:::  [max_depth] <in> Max recuse depth.  Default: 1
+:::  [max_depth] <in> Max recursion depth.  Default: 1
 :::.
 :::  append      <in> Append instead to path env variable rather than pre-pend.
 :::.
@@ -125,50 +170,73 @@ exit /b
 :::.
 :::  path       <out> Sets the path env variable if required.
 :::-------------------------------------------------------------------------------
-    setlocal enabledelayedexpansion
     if "%~1" neq "" (
         set "add_path=%~1"
     ) else (
-        %lib_console% show_error "You must specify a directory to add to the path!"
+        %print_error% "You must specify a directory to add to the path!"
         exit 1
     )
 
-    if "%~2" gtr "1" (
-        set "max_depth=%~2"
-    ) else (
-        set "max_depth=1"
-    )
+    set "depth=%~2"
+    set "max_depth=%~3"
 
-    if "%~3" neq "" if /i "%~3" == "append" (
-        set "position=%~3"
+    if "%~4" neq "" if /i "%~4" == "append" (
+        set "position=%~4"
     ) else (
         set "position="
     )
 
-    if "%fast_init%" == "1" (
-      call :enhance_path "%add_path%" %position%
-      goto :end_enhance_path_recursive
+    dir "%add_path%" 2>NUL | findstr -i "\.COM \.EXE \.BAT \.CMD \.PS1 \.VBS" >NUL
+
+    if "%ERRORLEVEL%" == "0" (
+        set "add_to_path=%add_path%"
+    ) else (
+        set "add_to_path="
     )
 
-    if "%depth%" == "" set depth=0
-
-    %lib_console% debug_output  :enhance_path_recursive "Env Var - add_path=%add_path%"
-    %lib_console% debug_output  :enhance_path_recursive "Env Var - position=%position%"
-    %lib_console% debug_output  :enhance_path_recursive "Env Var - max_depth=%max_depth%"
-
-    if %max_depth% gtr !depth! (
-        %lib_console% debug_output :enhance_path_recursive "Adding parent directory - '%add_path%'"
-        call :enhance_path "%add_path%" %position%
-        set /a "depth=!depth!+1"
-
-        for /d %%i in ("%add_path%\*") do (
-            %lib_console% debug_output  :enhance_path_recursive "Env Var BEFORE - depth=!depth!"
-            %lib_console% debug_output :enhance_path_recursive "Found Subdirectory - '%%~fi'"
-            call :enhance_path_recursive "%%~fi" %max_depth% %position%
-            %lib_console% debug_output  :enhance_path_recursive "Env Var AFTER- depth=!depth!"
+    if "%fast_init%" == "1" (
+        if "%add_to_path%" neq "" (
+            call :enhance_path "%add_to_path%" %position%
         )
     )
 
-    :end_enhance_path_recursive
-    endlocal & set "PATH=%PATH%"
+    set "PATH=%PATH:;;=;%"
+    if "%fast_init%" == "1" (
+      exit /b
+    )
+
+    %print_debug%  :enhance_path_recursive "Env Var - add_path=%add_to_path%"
+    %print_debug%  :enhance_path_recursive "Env Var - position=%position%"
+    %print_debug%  :enhance_path_recursive "Env Var - depth=%depth%"
+    %print_debug%  :enhance_path_recursive "Env Var - max_depth=%max_depth%"
+
+    if %max_depth% gtr %depth% (
+        if "%add_to_path%" neq "" (
+            %print_debug% :enhance_path_recursive "Adding parent directory - '%add_to_path%'"
+            call :enhance_path "%add_to_path%" %position%
+        )
+        call :set_depth
+        call :loop_depth
+    )
+
+    set "PATH=%PATH%"
+
     exit /b
+
+: set_depth
+    set /a "depth=%depth%+1"
+    exit /b
+
+:loop_depth
+    if %depth% == %max_depth% (
+        exit /b
+    )
+
+    for /d %%i in ("%add_path%\*") do (
+        %print_debug%  :enhance_path_recursive "Env Var BEFORE - depth=%depth%"
+        %print_debug% :enhance_path_recursive "Found Subdirectory - '%%~fi'"
+        call :enhance_path_recursive "%%~fi" %depth% %max_depth% %position%
+        %print_debug%  :enhance_path_recursive "Env Var AFTER- depth=%depth%"
+    )
+    exit /b
+

vendor/lib/lib_profile.cmd

@@ -38,7 +38,7 @@ exit /b
 
   pushd "%~1"
   for /f "usebackq" %%x in ( `dir /b *.bat *.cmd 2^>nul` ) do (
-    %lib_console% verbose_output "Calling '%~1\%%x'..."
+    %print_verbose% "Calling '%~1\%%x'..."
     call "%~1\%%x"
   )
   popd

vendor/lib/start-ssh-agent.sh

@@ -0,0 +1,22 @@
+# Copied from https://help.github.com/articles/working-with-ssh-key-passphrases
+env=~/.ssh/agent.env
+
+agent_load_env () { test -f "$env" && . "$env" >| /dev/null ; }
+
+agent_start () {
+    (umask 077; ssh-agent >| "$env")
+    . "$env" >| /dev/null ; }
+
+agent_load_env
+
+# agent_run_state: 0=agent running w/ key; 1=agent w/o key; 2= agent not running
+agent_run_state=$(ssh-add -l >| /dev/null 2>&1; echo $?)
+
+if [ ! "$SSH_AUTH_SOCK" ] || [ $agent_run_state = 2 ]; then
+    agent_start
+    ssh-add
+elif [ "$SSH_AUTH_SOCK" ] && [ $agent_run_state = 1 ]; then
+    ssh-add
+fi
+
+unset env

vendor/profile.ps1

@@ -3,6 +3,7 @@
 
 # !!! THIS FILE IS OVERWRITTEN WHEN CMDER IS UPDATED
 # !!! Use "%CMDER_ROOT%\config\user_profile.ps1" to add your own startup commands
+$CMDER_INIT_START=$(Get-Date -UFormat %s)
 
 # Compatibility with PS major versions <= 2
 if(!$PSScriptRoot) {
@@ -13,7 +14,7 @@ if ($ENV:CMDER_USER_CONFIG) {
     # write-host "CMDER IS ALSO USING INDIVIDUAL USER CONFIG FROM '$ENV:CMDER_USER_CONFIG'!"
 }
 
-# We do this for Powershell as Admin Sessions because CMDER_ROOT is not beng set.
+# We do this for Powershell as Admin Sessions because CMDER_ROOT is not being set.
 if (! $ENV:CMDER_ROOT ) {
     if ( $ENV:ConEmuDir ) {
         $ENV:CMDER_ROOT = resolve-path( $ENV:ConEmuDir + "\..\.." )
@@ -25,101 +26,88 @@ if (! $ENV:CMDER_ROOT ) {
 # Remove trailing '\'
 $ENV:CMDER_ROOT = (($ENV:CMDER_ROOT).trimend("\"))
 
-# do not load bundled psget if a module installer is already available
+# Do not load bundled psget if a module installer is already available
 # -> recent PowerShell versions include PowerShellGet out of the box
-$moduleInstallerAvailable = [bool](Get-Command -Name 'Install-Module' -ErrorAction SilentlyContinue | Out-Null)
+$moduleInstallerAvailable = [bool](Get-Command -Name 'Install-Module' -ErrorAction SilentlyContinue)
 
 # Add Cmder modules directory to the autoload path.
 $CmderModulePath = Join-path $PSScriptRoot "psmodules/"
 
+$CmderFunctions =  Join-Path $CmderModulePath "Cmder.ps1"
+. $CmderFunctions
+
 if(-not $moduleInstallerAvailable -and -not $env:PSModulePath.Contains($CmderModulePath) ){
     $env:PSModulePath = $env:PSModulePath.Insert(0, "$CmderModulePath;")
 }
 
-try {
-    Get-command -Name "vim" -ErrorAction Stop >$null
-} catch {
-    # # You could do this but it may be a little drastic and introduce a lot of
-    # # unix tool overlap with powershel unix like aliases
-    # $env:Path += $(";" + $env:CMDER_ROOT + "\vendor\git-for-windows\usr\bin")
-    # set-alias -name "vi" -value "vim"
-    # # I think the below is safer.
+$gitVersionVendor = (readVersion -gitPath "$ENV:CMDER_ROOT\vendor\git-for-windows\cmd")
+# write-host "GIT VENDOR: ${gitVersionVendor}"
 
-    new-alias -name "vim" -value $($ENV:CMDER_ROOT + "\vendor\git-for-windows\usr\bin\vim.exe")
+# Get user installed Git Version[s] and Compare with vendored if found.
+foreach ($git in (get-command -ErrorAction SilentlyContinue 'git')) {
+    # write-host "GIT Path: " + $git.Path
+    $gitDir = Split-Path -Path $git.Path
+    $gitDir = isGitShim -gitPath $gitDir
+    $gitVersionUser = (readVersion -gitPath $gitDir)
+    # write-host "GIT USER: ${gitVersionUser}"
+
+    $useGitVersion = compare_git_versions -userVersion $gitVersionUser -vendorVersion $gitVersionVendor
+    # write-host "Using GIT Version: ${useGitVersion}"
+
+    # Use user installed Git
+    if ($gitPathUser -eq $null) {
+      if ($gitDir -match '\\mingw32\\bin' -or $gitDir -match '\\mingw64\\bin') {
+        $gitPathUser = ($gitDir.subString(0,$gitDir.Length - 12))
+      } else {
+        $gitPathUser = ($gitDir.subString(0,$gitDir.Length - 4))
+      }
+    }
+
+    if ($useGitVersion -eq $gitVersionUser) {
+        # write-host "Using GIT Dir: ${gitDir}"
+        $ENV:GIT_INSTALL_ROOT = $gitPathUser
+        $ENV:GIT_INSTALL_TYPE = 'USER'
+        break
+    }
+}
+
+# User vendored Git.
+if ($ENV:GIT_INSTALL_ROOT -eq $null -and $gitVersionVendor -ne $null) {
+    $ENV:GIT_INSTALL_ROOT = "$ENV:CMDER_ROOT\vendor\git-for-windows"
+    $ENV:GIT_INSTALL_TYPE = 'VENDOR'
+}
+
+# write-host "GIT_INSTALL_ROOT: ${ENV:GIT_INSTALL_ROOT}"
+# write-host "GIT_INSTALL_TYPE: ${ENV:GIT_INSTALL_TYPE}"
+
+if (-not($ENV:GIT_INSTALL_ROOT -eq $null)) {
+    $env:Path = Configure-Git -gitRoot "$ENV:GIT_INSTALL_ROOT" -gitType $ENV:GIT_INSTALL_TYPE -gitPathUser $gitPathUser
+}
+
+if ( Get-command -Name "vim" -ErrorAction silentlycontinue) {
     new-alias -name "vi" -value vim
 }
 
-try {
-    # Check if git is on PATH, i.e. Git already installed on system
-    Get-command -Name "git" -ErrorAction Stop >$null
-} catch {
-    $env:Path += $(";" + $env:CMDER_ROOT + "\vendor\git-for-windows\cmd")
-    # for bash.exe, which in the cmd version is found as <GIT>\usr\bin\bash.exe
-    $env:Path += $(";" + $env:CMDER_ROOT + "\vendor\git-for-windows\bin")
-}
-
-$gitLoaded = $false
-function Import-Git($Loaded){
-    if($Loaded) { return }
-    $GitModule = Get-Module -Name Posh-Git -ListAvailable
-    if($GitModule | select version | where version -le ([version]"0.6.1.20160330")){
-        Import-Module Posh-Git > $null
-    }
-    if(-not ($GitModule) ) {
-        Write-Warning "Missing git support, install posh-git with 'Install-Module posh-git' and restart cmder."
-    }
-    # Make sure we only run once by alawys returning true
-    return $true
-}
-
-function checkGit($Path) {
-    if (Test-Path -Path (Join-Path $Path '.git') ) {
-        $gitLoaded = Import-Git $gitLoaded
-        Write-VcsStatus
-        return
-    }
-    $SplitPath = split-path $path
-    if ($SplitPath) {
-        checkGit($SplitPath)
-    }
-}
-
 if (Get-Module PSReadline -ErrorAction "SilentlyContinue") {
     Set-PSReadlineOption -ExtraPromptLineCount 1
 }
 
-# Enhance Path
-$env:Path = "$Env:CMDER_ROOT\bin;$Env:CMDER_ROOT\vendor\bin;$env:Path;$Env:CMDER_ROOT"
-
-#
-# Prompt Section
-#   Users should modify their user_profile.ps1 as it will be safe from updates.
-#
-
-# Pre assign the hooks so the first run of cmder gets a working prompt.
+# Pre assign default prompt hooks so the first run of cmder gets a working prompt.
+$env:gitLoaded = $false
 [ScriptBlock]$PrePrompt = {}
 [ScriptBlock]$PostPrompt = {}
 [ScriptBlock]$CmderPrompt = {
     $Host.UI.RawUI.ForegroundColor = "White"
+    Write-Host -NoNewline "$([char]0x200B)"
     Microsoft.PowerShell.Utility\Write-Host $pwd.ProviderPath -NoNewLine -ForegroundColor Green
-    checkGit($pwd.ProviderPath)
+    if (get-command git -erroraction silentlycontinue) {
+        checkGit($pwd.ProviderPath)
+    }
+    Microsoft.PowerShell.Utility\Write-Host "`nλ " -NoNewLine -ForegroundColor "DarkGray"
 }
 
-<#
-This scriptblock runs every time the prompt is returned.
-Explicitly use functions from MS namespace to protect from being overridden in the user session.
-Custom prompt functions are loaded in as constants to get the same behaviour
-#>
-[ScriptBlock]$Prompt = {
-    $realLASTEXITCODE = $LASTEXITCODE
-    $host.UI.RawUI.WindowTitle = Microsoft.PowerShell.Management\Split-Path $pwd.ProviderPath -Leaf
-    PrePrompt | Microsoft.PowerShell.Utility\Write-Host -NoNewline
-    CmderPrompt
-    Microsoft.PowerShell.Utility\Write-Host "`nλ " -NoNewLine -ForegroundColor "DarkGray"
-    PostPrompt | Microsoft.PowerShell.Utility\Write-Host -NoNewline
-    $global:LASTEXITCODE = $realLASTEXITCODE
-    return " "
-}
+# Enhance Path
+$env:Path = "$Env:CMDER_ROOT\bin;$Env:CMDER_ROOT\vendor\bin;$env:Path;$Env:CMDER_ROOT"
 
 # Drop *.ps1 files into "$ENV:CMDER_ROOT\config\profile.d"
 # to source them at startup.
@@ -181,48 +169,50 @@ if ($ENV:CMDER_USER_CONFIG) {
 }
 
 if (! (Test-Path $CmderUserProfilePath) ) {
-# This multiline string cannot be indented, for this reason I've not indented the whole block
-
-Write-Host -BackgroundColor Darkgreen -ForegroundColor White "First Run: Creating user startup file: $CmderUserProfilePath"
-
-$UserProfileTemplate = @'
-# Use this file to run your own startup commands
-
-## Prompt Customization
-<#
-.SYNTAX
-    <PrePrompt><CMDER DEFAULT>
-    λ <PostPrompt> <repl input>
-.EXAMPLE
-    <PrePrompt>N:\Documents\src\cmder [master]
-    λ <PostPrompt> |
-#>
-
-[ScriptBlock]$PrePrompt = {
-
+    Write-Host -BackgroundColor Darkgreen -ForegroundColor White "First Run: Creating user startup file: $CmderUserProfilePath"
+    Copy-Item "$env:CMDER_ROOT\vendor\user_profile.ps1.default" -Destination $CmderUserProfilePath
 }
 
-# Replace the cmder prompt entirely with this.
-# [ScriptBlock]$CmderPrompt = {}
+#
+# Prompt Section
+#   Users should modify their user_profile.ps1 as it will be safe from updates.
+#
 
-[ScriptBlock]$PostPrompt = {
+# Only set the prompt if it is currently set to the default
+# This allows users to configure the prompt in their user_profile.ps1 or config\profile.d\*.ps1
+if ( $(get-command prompt).Definition -match 'PS \$\(\$executionContext.SessionState.Path.CurrentLocation\)\$\(' -and `
+  $(get-command prompt).Definition -match '\(\$nestedPromptLevel \+ 1\)\) ";') {
 
+  <#
+  This scriptblock runs every time the prompt is returned.
+  Explicitly use functions from MS namespace to protect from being overridden in the user session.
+  Custom prompt functions are loaded in as constants to get the same behaviour
+  #>
+  [ScriptBlock]$Prompt = {
+      $realLASTEXITCODE = $LASTEXITCODE
+      $host.UI.RawUI.WindowTitle = Microsoft.PowerShell.Management\Split-Path $pwd.ProviderPath -Leaf
+      PrePrompt | Microsoft.PowerShell.Utility\Write-Host -NoNewline
+      CmderPrompt
+      PostPrompt | Microsoft.PowerShell.Utility\Write-Host -NoNewline
+      $global:LASTEXITCODE = $realLASTEXITCODE
+      return " "
+  }
+
+
+  # Once Created these code blocks cannot be overwritten
+  # if (-not $(get-command PrePrompt).Options -match 'Constant') {Set-Item -Path function:\PrePrompt   -Value $PrePrompt   -Options Constant}
+  # if (-not $(get-command CmderPrompt).Options -match 'Constant') {Set-Item -Path function:\CmderPrompt -Value $CmderPrompt -Options Constant}
+  # if (-not $(get-command PostPrompt).Options -match 'Constant') {Set-Item -Path function:\PostPrompt  -Value $PostPrompt  -Options Constant}
+
+  Set-Item -Path function:\PrePrompt   -Value $PrePrompt   -Options Constant
+  Set-Item -Path function:\CmderPrompt -Value $CmderPrompt -Options Constant
+  Set-Item -Path function:\PostPrompt  -Value $PostPrompt  -Options Constant
+
+  # Functions can be made constant only at creation time
+  # ReadOnly at least requires `-force` to be overwritten
+  # if (!$(get-command Prompt).Options -match 'ReadOnly') {Set-Item -Path function:\prompt  -Value $Prompt  -Options ReadOnly}
+  Set-Item -Path function:\prompt  -Value $Prompt  -Options ReadOnly
 }
 
-## <Continue to add your own>
-
-
-'@
-
-New-Item -ItemType File -Path $CmderUserProfilePath -Value $UserProfileTemplate > $null
-
-}
-
-# Once Created these code blocks cannot be overwritten
-Set-Item -Path function:\PrePrompt   -Value $PrePrompt   -Options Constant
-Set-Item -Path function:\CmderPrompt -Value $CmderPrompt -Options Constant
-Set-Item -Path function:\PostPrompt  -Value $PostPrompt  -Options Constant
-
-# Functions can be made constant only at creation time
-# ReadOnly at least requires `-force` to be overwritten
-Set-Item -Path function:\prompt  -Value $Prompt  -Options ReadOnly
+$CMDER_INIT_END=$(Get-Date -UFormat %s)
+# write-host "Elapsed Time: $(get-Date) `($($CMDER_INIT_END - $CMDER_INIT_START) total`)"

vendor/psmodules/Cmder.ps1

@@ -0,0 +1,169 @@
+function readVersion($gitPath) {
+    $gitExecutable = "${gitPath}\git.exe"
+
+    if (!(test-path "$gitExecutable")) {
+        return $null
+    }
+
+    $gitVersion = (cmd /c "${gitExecutable}" --version)
+
+    if ($gitVersion -match 'git version') {
+        ($trash1, $trash2, $gitVersion) = $gitVersion.split(' ', 3)
+    } else {
+        pause
+        return $null
+    }
+
+    return $gitVersion.toString()
+}
+
+function isGitShim($gitPath) {
+    # check if there's shim - and if yes follow the path
+
+    if (test-path "${gitPath}\git.shim") {
+      $shim = (get-content "${gitPath}\git.shim")
+      ($trash, $gitPath) = $shim.replace(' ','').split('=')
+
+      $gitPath=$gitPath.replace('\git.exe','')
+    }
+
+    return $gitPath.toString()
+}
+
+function compareVersions($userVersion, $vendorVersion) {
+    if (-not($userVersion -eq $null)) {
+        ($userMajor, $userMinor, $userPatch, $userBuild) = $userVersion.split('.', 4)
+    } else {
+        return -1
+    }
+
+    if (-not($vendorVersion -eq $null)) {
+        ($vendorMajor, $vendorMinor, $vendorPatch, $vendorBuild) = $vendorVersion.split('.', 4)
+    } else {
+        return 1
+    }
+
+    if (($userMajor -eq $vendorMajor) -and  ($userMinor -eq $vendorMinor) -and  ($userPatch -eq $vendorPatch) -and  ($userBuild -eq $vendorBuild)) {
+        return 1
+    }
+
+    if ($userMajor -gt $vendorMajor) {return 1}
+    if ($userMajor -lt $vendorMajor) {return -1}
+
+    if ($userMinor -gt $vendorMinor) {return 1}
+    if ($userMinor -lt $vendorMinor) {return -1}
+
+    if ($userPatch -gt $vendorPatch) {return 1}
+    if ($userPatch -lt $vendorPatch) {return -1}
+
+    if ($userBuild -gt $vendorBuild) {return 1}
+    if ($userBuild -lt $vendorBuild) {return -1}
+
+    return 0
+}
+
+function compare_git_versions($userVersion, $vendorVersion) {
+    $result = compareVersions -userVersion $userVersion -vendorVersion $vendorVersion
+
+    # write-host "Compare Versions Result: ${result}"
+    if ($result -ge 0) {
+        return $userVersion
+    } else {
+        return $vendorVersion
+    }
+}
+
+function Configure-Git($gitRoot, $gitType, $gitPathUser){
+    # Proposed Behavior
+
+    # Modify the path if we are using VENDORED Git do nothing if using USER Git.
+    # If User Git is installed but older match its path config adding paths
+    # in the same path positions allowing a user to configure Cmder Git path
+    # using locally installed Git Path Config.
+    if ($gitType -eq 'VENDOR') {
+        # If User Git is installed replace its path config with Newer Vendored Git Path
+        if ($gitPathUser -ne '' -and $gitPathUser -ne $null) {
+            # write-host "Cmder 'profile.ps1': Replacing older user Git path '$gitPathUser' with newer vendored Git path '$gitRoot' in the system path..."
+
+            $newPath = ($env:path -ireplace [regex]::Escape($gitPathUser), $gitRoot)
+        } else {
+            if (!($env:Path -match [regex]::Escape("$gitRoot\cmd"))) {
+                # write-host "Adding $gitRoot\cmd to the path"
+                $newPath = $($gitRoot + "\cmd" + ";" + $env:Path)
+            }
+
+            # Add "$gitRoot\mingw[32|64]\bin" to the path if exists and not done already
+            if ((test-path "$gitRoot\mingw32\bin") -and -not ($env:path -match [regex]::Escape("$gitRoot\mingw32\bin"))) {
+                # write-host "Adding $gitRoot\mingw32\bin to the path"
+                $newPath = "$newPath;$gitRoot\mingw32\bin"
+            } elseif ((test-path "$gitRoot\mingw64\bin") -and -not ($env:path -match [regex]::Escape("$gitRoot\mingw64\bin"))) {
+                # write-host "Adding $gitRoot\mingw64\bin to the path"
+                $newPath = "$newPath;$gitRoot\mingw64\bin"
+            }
+
+            # Add "$gitRoot\usr\bin" to the path if exists and not done already
+            if ((test-path "$gitRoot\usr\bin") -and -not ($env:path -match [regex]::Escape("$gitRoot\usr\bin"))) {
+                # write-host "Adding $gitRoot\usr\bin to the path"
+                $newPath = "$newPath;$gitRoot\usr\bin"
+            }
+        }
+
+        return $newPath
+    }
+
+    return $env:path
+}
+
+function Import-Git(){
+    $GitModule = Get-Module -Name Posh-Git -ListAvailable
+    if($GitModule | select version | where version -le ([version]"0.6.1.20160330")){
+        Import-Module Posh-Git > $null
+    }
+    if($GitModule | select version | where version -ge ([version]"1.0.0")){
+        Import-Module Posh-Git > $null
+        $GitPromptSettings.AnsiConsole = $false
+    }
+    if(-not ($GitModule) ) {
+        Write-Warning "Missing git support, install posh-git with 'Install-Module posh-git' and restart cmder."
+    }
+    # Make sure we only run once by alawys returning true
+    return $true
+}
+
+function checkGit($Path) {
+    if (Test-Path -Path (Join-Path $Path '.git') ) {
+      if($env:gitLoaded -eq 'false') {
+        $env:gitLoaded = Import-Git
+      }
+
+      if (getGitStatusSetting -eq $true) {
+        Write-VcsStatus
+      } else {
+        $headContent = Get-Content (Join-Path $Path '.git/HEAD')
+        if ($headContent -like "ref: refs/heads/*") {
+            $branchName = $headContent.Substring(16)
+        } else {
+            $branchName = "HEAD detached at $($headContent.Substring(0, 7))"
+        }
+        Write-Host " [$branchName]" -NoNewline -ForegroundColor White
+      }
+
+      return
+    }
+    $SplitPath = split-path $path
+    if ($SplitPath) {
+        checkGit($SplitPath)
+    }
+}
+
+function getGitStatusSetting() {
+    $gitStatus = (git --no-pager config -l) | out-string
+
+    ForEach ($line in $($gitStatus -split "`r`n")) {
+        if ($line -match 'cmder.status=false' -or $line -match 'cmder.psstatus=false') {
+            return $false
+        }
+    }
+
+    return $true
+}

vendor/psmodules/PsGet/PsGet.psm1

@@ -124,7 +124,7 @@ Set-Variable -Name PSGET_PSD1 -Value 'PSD1' -Option Constant -Scope Script
 
         Description
         -----------
-        Installs the module witout importing it to the current session
+        Installs the module without importing it to the current session
 
     .EXAMPLE
         # Install-Module PoshHg -AddToProfile
@@ -448,7 +448,7 @@ function Update-Module {
 
         Description
         -----------
-        Retrieves information about all registerd modules that starts with PoshCo.
+        Retrieves information about all registered modules that start with PoshCo.
 #>
 function Get-PsGetModuleInfo {
     [CmdletBinding()]
@@ -694,7 +694,7 @@ function Install-ModuleFromDirectory {
             throw "Module $Module was not found in central repository"
         }
 
-        # $Module and $moduleData.Id are not equally by garantee, so we have to test again.
+        # $Module and $moduleData.Id are not equally by guarantee, so we have to test again.
         if (Test-ModuleInstalledAndImport -ModuleName:$moduleData.ModuleName -Destination:$Destination -Update:$Update -DoNotImport:$DoNotImport -ModuleHash:$ModuleHash) {
             return
         }
@@ -1488,7 +1488,7 @@ function Invoke-DownloadModuleFromWeb {
         Install the module inside of the provided directory into the defined destination
         and perform the following steps:
 
-        * Rename module if requestes by provided InstallWithModuleName
+        * Rename module if requested by provided InstallWithModuleName
         * If a ModuleHash is provided, check if it matches.
         * Add the destination path to the PSModulePath if necessary (depends on provided parameters)
         * Place the conventions-matching module folder in the destination folder
@@ -1796,9 +1796,9 @@ function Test-ModuleInstalledAndImport {
 
 <#
     .SYNOPSIS
-        Extract the content of the referenced zip file to the defind destination
+        Extract the content of the referenced zip file to the defined destination
 
-    .PARAMATER Path
+    .PARAMETER Path
         Path to a zip file with the file extension '.zip'
 
     .Parameter Destination
@@ -1856,7 +1856,7 @@ function Expand-ZipModule {
 
 <#
     .SYNOPSIS
-        Update '$env:PSModulePath' from 'User' and 'Machine' scope envrionment variables
+        Update '$env:PSModulePath' from 'User' and 'Machine' scope environment variables
 #>
 function Update-PSModulePath {
     process {

vendor/sources.json

@@ -1,22 +1,22 @@
 [
     {
         "name": "git-for-windows",
-        "version": "v2.19.0.windows.1",
-        "url": "https://github.com/git-for-windows/git/releases/download/v2.19.0.windows.1/PortableGit-2.19.0-64-bit.7z.exe"
+        "version": "v2.34.0.windows.1",
+        "url": "https://github.com/git-for-windows/git/releases/download/v2.34.0.windows.1/PortableGit-2.34.0-64-bit.7z.exe"
     },
     {
         "name": "clink",
-        "version": "0.4.9",
-        "url": "https://github.com/mridgers/clink/releases/download/0.4.9/clink_0.4.9.zip"
+        "version": "1.2.46",
+        "url": "https://github.com/chrisant996/clink/releases/download/v1.2.46/clink.1.2.46.69fc92.zip"
     },
     {
         "name": "conemu-maximus5",
-        "version": "180626",
-        "url": "https://github.com/Maximus5/ConEmu/releases/download/v18.06.26/ConEmuPack.180626.7z"
+        "version": "210912",
+        "url": "https://github.com/Maximus5/ConEmu/releases/download/v21.09.12/ConEmuPack.210912.7z"
     },
     {
         "name": "clink-completions",
-        "version": "0.3.3",
-        "url": "https://github.com/vladimir-kotikov/clink-completions/archive/0.3.3.zip"
+        "version": "0.3.7",
+        "url": "https://github.com/vladimir-kotikov/clink-completions/archive/0.3.7.zip"
     }
 ]

vendor/user_aliases.cmd.default

@@ -9,7 +9,6 @@ gl=git log --oneline --all --graph --decorate  $*
 ls=ls --show-control-chars -F --color $*
 pwd=cd
 clear=cls
-history=cat "%CMDER_ROOT%\config\.history"
 unalias=alias /d $1
 vi=vim $*
 cmderr=cd /d "%CMDER_ROOT%"

vendor/user_profile.cmd.default

@@ -0,0 +1,19 @@
+:: use this file to run your own startup commands
+:: use in front of the command to prevent printing the command
+
+:: uncomment this to have the ssh agent load when cmder starts
+:: call "%GIT_INSTALL_ROOT%/cmd/start-ssh-agent.cmd" /k exit
+
+:: uncomment the next two lines to use pageant as the ssh authentication agent
+:: SET SSH_AUTH_SOCK=/tmp/.ssh-pageant-auth-sock
+:: call "%GIT_INSTALL_ROOT%/cmd/start-ssh-pageant.cmd"
+
+:: you can add your plugins to the cmder path like so
+:: set "PATH=%CMDER_ROOT%\vendor\whatever;%PATH%"
+
+:: arguments in this batch are passed from init.bat, you can quickly parse them like so:
+:: more usage can be seen by typing "cexec /?"
+
+:: %ccall% "/customOption" "command/program"
+
+@echo off

vendor/user_profile.ps1.default

@@ -0,0 +1,41 @@
+# Use this file to run your own startup commands
+
+## Prompt Customization
+<#
+.SYNTAX
+    <PrePrompt><CMDER DEFAULT>
+    λ <PostPrompt> <repl input>
+.EXAMPLE
+    <PrePrompt>N:\Documents\src\cmder [master]
+    λ <PostPrompt> |
+#>
+
+[ScriptBlock]$PrePrompt = {
+
+}
+
+# Replace the cmder prompt entirely with this.
+# [ScriptBlock]$CmderPrompt = {}
+
+[ScriptBlock]$PostPrompt = {
+
+}
+
+## <Continue to add your own>
+
+# # Delete default powershell aliases that conflict with bash commands
+# if (get-command git) {
+#     del -force alias:cat
+#     del -force alias:clear
+#     del -force alias:cp
+#     del -force alias:diff
+#     del -force alias:echo
+#     del -force alias:kill
+#     del -force alias:ls
+#     del -force alias:mv
+#     del -force alias:ps
+#     del -force alias:pwd
+#     del -force alias:rm
+#     del -force alias:sleep
+#     del -force alias:tee
+# }

vendor/user_profile.sh.default

@@ -0,0 +1,7 @@
+# use this file to run your own startup commands for msys2 bash'
+
+# To add a new vendor to the path, do something like:
+# export PATH=${CMDER_ROOT}/vendor/whatever:${PATH}
+
+# Uncomment this to have the ssh agent load with the first bash terminal
+# . "${CMDER_ROOT}/vendor/lib/start-ssh-agent.sh"